Atkins and Pearce Ben-Har® 1151-FR Class H Grade A Silicone Rubber Coated Sleeving, 1 AWG, 50' Per Spool, Red Iron Oxide, MFR ID SRFRA01RAB
- MFR #3200190114S
- EIS #SRFRA01RAB
- Series #Ben-Har® 1151-FR-A
Requires Quote / Foot
Available to Order
Refine your product below or compare all choices in the
Min QTY1QTY Increment1
more info
Products You May Also Like
| Stock Status | |||||
|---|---|---|---|---|---|
 | 50 ft | 0.375 Inch | Black | $ / Foot more info | |
 | 50 ft | 0.375 Inch | White | $ / Foot more info | |
| 50 ft | 0.437 Inch | Red Iron Oxide | $ / Foot more info | |
| 50 ft | 0.875 Inch | Black | $ / Foot more info | |
| 50 ft | 0.75 Inch | Black | $ / Foot more info | |
| 50 ft | 1 AWG | Red Iron Oxide | $ / Foot more info |
Ben-Har 1151-FR sleeving is an extremely flexible silicone rubber coated fiberglass sleeving with outstanding flame retardant properties. - The special combination of a smooth fiberglass bore and flexible, elastomeric silicone coating allows this sleeving to expand and conform over larger dimensions, assuring a snug fit, permanent placement, and elastic self-fitting on components or terminals.
Features
- Excellent low temperature flexibility with outstanding flame retardant properties
- Compatible with common class H insulating varnishes
- Resistant to acids, alkalis, organic solvents and aliphatic hydrocarbons, slight swelling may be produced by aromatic solvents and chlorinated hydrocarbons
- Ketones and esters may cause deterioration
- Dielectric Grade: A
- Volume Resistivity: 2.48 Ohm-cm x 10^14 Ohm-cm
- Length: 50 ft Per Spool
Applications
- Appliance Assemblies
- Wire Harnesses
- Transformer Leads
- Power Supplies
- Motor Coil and Heater Leads
General Information
| Item Name | Silicone Rubber Coated Sleeving |
| Trade Name | Ben-Har® |
| Series | Ben-Har® 1151-FR-A |
Design & Construction
| Color | Red Iron Oxide |
| Braid Type | Fiberglass |
| Grade | A |
| Insulation Material | Silicone Rubber |
| Insulation Type | Class H |
| Insulation Coating Type | Silicone |
| NEMA Specification | NEMA TF-1 Type 5 |
Performance Details
| Flame Retardant | Yes |
| Tear Strength | 70 psi |
| Tensile Strength | 875 psi |
Electrical Properties
| Breakdown Voltage | 8000 V |
| Dielectric Strength | 485 V/mil |
Physical Properties
| Gauge | 1 AWG |
| Inside Diameter | 0.294 Inch |
| Length | 50 ft |
| Elongation | 500% |
| Hardness | 35 +/- 5 Shore A |
Documents
No Documents Found