Elantas PDG 70 VT High Build Precatalyzed Thixotropic Polyester Resin
MFR #:70 VT
EIS #:PH21-70 VT
MFR #:70 VT
EIS #:PH21-70 VT
Elantas PDG 70 VTC High Build Precatalyzed Thixotropic Polyester Resin, 2100 V/Mil (As Made), 1800 V/Mil (After 24 hr in Water (ASTM D149)) Dielectric Strength, 53 °C (ASTM D93) Flash Point, >10 min (Sunshine) At 125 °C (212 °F) (ASTM D3056) Gel Time, 80 Shore D (ASTM 2240) Hardness, 900 - 1700 CP At 25 °C (77 °F), 20 rpm (ASTM D2196) Viscosity. - The Pedigree 70VTC thixotropic is an unsaturated polyester resin in vinyl toluene. It is it an excellent choice for impregnation of stators.
$14.59
- $15.74
Select from the options below
Elantas PDG 70 VTC High Build Precatalyzed Thixotropic Polyester Resin, 2100 V/Mil (As Made), 1800 V/Mil (After 24 hr in Water (ASTM D149)) Dielectric Strength, 53 °C (ASTM D93) Flash Point, >10 min (Sunshine) At 125 °C (212 °F) (ASTM D3056) Gel Time, 80 Shore D (ASTM 2240) Hardness, 900 - 1700 CP At 25 °C (77 °F), 20 rpm (ASTM D2196) Viscosity. - The Pedigree 70VTC thixotropic is an unsaturated polyester resin in vinyl toluene. It is it an excellent choice for impregnation of stators.
Product Options
Showing 2 out of 2 options
 | Container Size: 46 lb | EIS Part #: PDG70VTPAIL | $ / US pound | |
| Container Size: 515 lb | EIS Part #: PDG70VTDRUM | $ / US pound |
- Attributes
- Features
- Applications
- Documents
Attributes
General Information
Item NamePrecatalyzed Thixotropic Polyester Resin
Series70 VT
General Features
Shelf Life6 Months
TypeHigh Build
Performance Details
Gel Time10 min
Technical Details
Flash Point53 °C
Chemical Properties
Viscosity900 cP
Electrical Properties
Dielectric Strength2100 V/mil
Physical Properties
Hardness80 Shore D (ASTM D2240)
Features
- Good bond strength
- High film build
- Offers thermal ratings from 130 °C to 220 °C
- Dip and bake, vacuum pressure impregnation (VPI), vacuum impregnation (VI) application methods
- This resin should be stored at 25 °C / 77 °F in a dry controlled environment out of direct sunlight
- 4.4 Mils film thickness
- 27 Pounds at 25 °C (ASTM D2519) MW35, 3 pounds at 150 °C helical coil bond strength (ASTM D2519 MW 35)
- Secondary insulation
- Dielectric Strength: 2100 V/Mil (As Made), 1800 V/Mil (After 24 hr in Water (ASTM D149))
- Flash Point: 53 °C (ASTM D93)
- Viscosity: 900 - 1700 CP at 25 °C/77 °F, 20 rpm/ASTM D2196)
- Gel Time: >10 min
- Viscosity: 900 - 1700 cP
Applications
- Impregnation of Stators and Armatures