Elantas Electrical Insulation E-8112 Epoxylite® Two-Part High Temperature Potting Compound, 0.219 lb Kit, MFR ID E 8112K
- MFR #119831
- EIS #EPO8112K
- Series #E-8112
$382.95 / Kit
Available to Order
Refine your product below or compare all choices in the
Min QTY1QTY Increment1
more info
| Stock Status | |||
|---|---|---|---|
 | 0.219 lb | $ / Kit more info |
Epoxylite E 8112 hi temp epoxy products are filled and sold by weight and may contain less than the nominal volume of the container. Maintains excellent electrical and physical properties to at least 260 deg C / 500 deg F.
Epoxylite E 8112 hi-temp epoxy is a heat-cured, two-component system consisting of a viscous liquid resin and a finely divided powder hardener. It is provided in pre-measured kits. Epoxylite resins are used in overcoating and impregnation of armatures, stators and coils in motors and generators.
Applications
- For Potting and Sealing of Electrical and Electronic Components Requiring Resistance to High Temperatures
Features
- Withstands temperatures in excess of 316 deg C / 600 deg F for short periods
- Excellent adhesion to metals, ceramics and most plastics
- Resistant to acids, alkalis and solvents
General Information
| Item Name | Potting Compound |
| Trade Name | Elantas |
| Series | E-8112 |
General Features
| Standards | OSHA Approved, 29 CFR 1910.94 Certified |
| Shelf Life | 6 Months |
| Storage Temperature | Below 25 deg C |
| Type | Two-Part, High Temperature |
Design & Construction
| Cure Type | Room Temperature |
| Form - Part-A | Liquid |
| Form - Part-B | Powder |
Performance Details
| Full Cure Time | See TDS |
Chemical Properties
| Composition | Epoxy Anhydride |
| Viscosity | 22 sq-mm/sec |
Electrical Properties
| Dielectric Strength | 560V/Mil |
Physical Properties
| Container Size | 0.219 lb |
| Container Type | Kit |
| Hardness | 90 Shore D |
Supporting Information
| Application Method | Bench Casting, Vacuum Casting |
Documents
No Documents Found