ELAN-Plus™ MR 7402 is an opaque white paste that acts as a masking agent in order to protect surfaces that are not intended to be coated during a painting or varnishing operation. It can be applied by brush, spatula, or a gloved hand, and it requires no heat cure. Treated units can be coated or impregnated immediately. -
ELAN-Plus™ MR 7402 masking compound is thixotropic and provides excellent coverage for vertical and horizontal surfaces, bolts, and bolt holes.
ELAN-Plus™ MR 7402 does not sag or run during varnish cure. It also offers easy substrate clean up after cure with a scraper or spatula, requiring minimal bolt hole thread cleaning or obstruction during reassembly.
$61.07
- $69.26
Select from the options below
ELAN-Plus™ MR 7402 is an opaque white paste that acts as a masking agent in order to protect surfaces that are not intended to be coated during a painting or varnishing operation. It can be applied by brush, spatula, or a gloved hand, and it requires no heat cure. Treated units can be coated or impregnated immediately. -
ELAN-Plus™ MR 7402 masking compound is thixotropic and provides excellent coverage for vertical and horizontal surfaces, bolts, and bolt holes.
ELAN-Plus™ MR 7402 does not sag or run during varnish cure. It also offers easy substrate clean up after cure with a scraper or spatula, requiring minimal bolt hole thread cleaning or obstruction during reassembly.
Product Options
Showing 2 out of 2 options
Page 1 of 1
more info
Container Size:
1 gal
EIS Part #:
TS7402-011G
$ / US pound
Container Size:
5 gallons
EIS Part #:
MR74025G
$ / US pound
Page 1 of 1
more info
Attributes
Features
Documents
Attributes
General Information
Item NameMasking Compound
Trade NameElan-Plus™
SeriesMR 7402
Design & Construction
ColorWhite
FormPaste
Features
No heat cure required
Thixotropic for minimal flow
VOC less than 0.10 lbs per gallon
Suitable for typical impregnating resin cure temperatures up to 400°F
Compatible with 100% epoxy, unsaturated polyester, solvent-borne and water-borne impregnating resins*
Film does not affect cure of paint or varnish
*The user should confirm the suitability of ELAN-Plus™ MR 7402 masking compound for his application before use in production.