MFR #:Sterling® Y210
EIS #:PH21-Sterling Y210
MFR #:Sterling® Y210
EIS #:PH21-Sterling Y210
Elantas PDG Sterling® Y210 Solvent-Borne Impregnating Resin, Oven Cure Type, 3400 V/Mil (Dry), 3100 V/Mil (Wet) Dielectric Strength, 28 °C Flash Point, 4 hr At 150 °C or 2 hr At 175 °C Full Cure Time, 180 °C Temperature Rating, 150 - 250 CP At 25 °C Viscosity. - Sterling® Y-210 is a clear, solvent-borne, heat cured impregnating resin.
$3.69
- $241.78
Select from the options below
Elantas PDG Sterling® Y210 Solvent-Borne Impregnating Resin, Oven Cure Type, 3400 V/Mil (Dry), 3100 V/Mil (Wet) Dielectric Strength, 28 °C Flash Point, 4 hr At 150 °C or 2 hr At 175 °C Full Cure Time, 180 °C Temperature Rating, 150 - 250 CP At 25 °C Viscosity. - Sterling® Y-210 is a clear, solvent-borne, heat cured impregnating resin.
Product Options
Showing 4 out of 4 options
Container Size: 439 lb | EIS Part #: Y210439LB | $ / US pound | ||
Container Size: 39 lb | EIS Part #: Y21039LB | $ / US pound | ||
Container Size: 2300 lb | EIS Part #: Y2102300LB | $ / US pound | ||
Container Size: 40 lb | EIS Part #: PDGY2105BLKG | $ / US gallon |
- Attributes
- Features
- Applications
- Documents
Attributes
General Information
Item NameImpregnating Resin
Trade NameSterling®
SeriesSterling® Y210
General Features
Shelf Life12 Months
TypeSolvent-Borne
Design & Construction
ColorClear
Cure TypeOven Cure
Performance Details
Full Cure Time4 hr at 150 °C or 2 hr at 175 °C
Technical Details
Flash Point28 °C
Chemical Properties
Viscosity150 cP
Electrical Properties
Dielectric Strength3400 V/mil
Environmental Condition
Temperature Rating180 °C
Features
- An industry standard for high-temperature performance
- Cures to a black, high gloss film
- Low viscosity for excellent penetration
- Semi-flexible for noise suppression
- Excellent tank stability
- Secondary insulation
- Dip-and-bake, roll through application methods
- Viscosity: 150 - 250 cP
Applications
- For Impregnation of Motor and Transformer Windings