3M Kynar MFP 2:1 Special Purpose Heat Shrink Tubing, 1/8", 1/2" Cut Piece, Clear, MFR ID KYNAR.125X.5M
- MFR #Kynar™ MFP
- EIS #KYNAR.125X.5M
- Series #Kynar™ MFP
$70.59 / 1000Piece
In Stock | Ready to Ship
Refine your product below or compare all choices in the
Min QTY1QTY Increment1
more info
| Stock Status | ||||
|---|---|---|---|---|
 | 0.5 Inch | 0.125 Inch | $ / Piece |
3M™ heat shrink tubing LMFP is a cross-linked, thin-walled, heat-shrinkable tubing offering a high degree of mechanical strength and high temperature resistance. When heated in excess of 347 °F (175 °C), MFP tubing rapidly shrinks to a skintight fit.
3M™ Heat Shrink Tubing MFP is a cross-linked, thin-walled, heat-shrinkable tubing offering a high degree of mechanical strength and high-temperature resistance. Fabricated from polyvinylidene fluoride, the tubing has outstanding abrasion resistance and cut through properties in combination with high dielectric strength. It is inherently flame retardant, semi-rigid and highly resistant to most industrial fuels, chemicals and solvents.
Features
- Fabricated from polyvinylidene fluoride, the tubing has outstanding abrasion resistance and cutthrough properties in combination with high dielectric strength
- It is inherently flame-retardant, semi-rigid and highly resistant to most industrial fuels, chemicals and solvents
- When heated in excess of 175 °C (347 °F), MFP tubing rapidly shrinks to a skintight fit
- The tubing is readily marked by hot-stamp and print-wheel equipment
- When freely recovered, the tubing will shrink to 50% of its as-supplied internal diameter
- The recovered wall thickness is proportional to the degree of recovery
- Non-corrosive chemical effect
- Excellent fuel and oil resistance, solvent resistance, abrasion resistance, acids and alkalis resistance
- Self-extinguishing
- Low Temperature Flexibility: -55 °C
- Temperature rating: -55 to 175 °C
- Length: 0.5 Inch Cut Piece
- Volume Resistivity: 10^14 Ohm-cm
- Wall Thickness: 0.010 Inch (Recovered)
Applications
- Heat-Resistant Transparent Insulation and Marking for Electronic and Appliance Applications
General Information
| Item Name | Heat Shrink Tubing |
| Trade Name | Kynar™ |
| Series | Kynar™ MFP |
General Features
| Type | Special Purpose, Semi-Rigid |
| Shelf Life | 120 Months |
Design & Construction
| Color | Clear |
| Insulation Material | Modified Polyvinylidene Fluoride |
| Minimum Shrink Temperature | 175 °C |
| Wall Type | Thin |
Performance Details
| Flame Retardant | Yes |
| Heat Aging | 4 hr |
| Low Temperature Flexibility | -55 °C |
| Shrink Ratio | 2:1 |
| Tensile Strength | 5500 psi |
Chemical Properties
| Specific Gravity | 1.7 |
Electrical Properties
| Dielectric Strength | 900 V/mil |
| Voltage Rating | 600 V |
Physical Properties
| Elongation | 350% |
| Expandable Diameter | 0.125 Inch |
| Length | 0.5 Inch |
| Recovered Diameter | 0.062 Inch |
| Wall Thickness | 0.01 Inch |
Environmental Condition
| Temperature Rating | -55 to 175 °C |