3M EPS-200 2:1 Adhesive-Lined Heat Shrink Tubing, 2", 4', Black, MFR ID EPS2002.000
- MFR #7010400866
- EIS #EPS2002.000
- Series #EPS-200
$15.44 / Foot
Available to Order
Refine your product below or compare all choices in the
Min QTY1QTY Increment1
more info
Products You May Also Like
| Stock Status | |||||
|---|---|---|---|---|---|
 | 4 ft | 0.125 Inch | Black | $ / Foot more info | |
| 4 ft | 0.75 Inch | Black | $ / Foot more info | |
| 4 ft | 0.375 Inch | Black | $ / Foot more info | |
| 4 ft | 0.5 Inch | Black | $ / Foot more info | |
 | 20 ft | 0.75 Inch | Black | $ / Box more info | |
| 48 ft | 0.375 Inch | Black | $ / Box |
The heat-shrinkable outer wall is selectively cross-linked while maintaining the high flow and excellent adhesion of the inner sealant liner.
3M™ Heat Shrink Tubing EPS-200 is a 2:1 thin-wall tubing offering the advantages of integral adhesive-lined construction. The tubing is made from a flame-retardant, flexible polyolefin with a thin layer of special thermoplastic adhesive.
Applications
- Offers Convenient Protection for Electronic Components, Wire Splices, Wire Bundles and Harness Breakouts
- Automotive, Truck and Marine Wiring Splices and Harness Breakouts are Quickly and Easily Protected from Harsh Environments
Features
- When heated in excess of 121 °C (250 °F), EPS-200 tubing rapidly shrinks to a skintight fit, forcing the melted adhesive lining to flow and cover the substrate
- The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals
- Upon cooling, the adhesive solidifies forming a durable, non-drying, flexible and water resistant barrier
- When freely recovered, the tubing will shrink to 50% of its original diameter
- The recovered wall thickness of the tubing is proportional to the degree of recovery
- Non-corrosive chemical effect
- Non-nutrient fungus resistance
- Excellent fluid resistance
- Dual-wall construction provides abrasion resistance and moisture-seal protection
- Self-extinguishing
- No dripping, flowing or cracking (4 hr at 225 °C) of heat shock
- Low Temperature Flexibility: -55 °C
- Temperature rating: -55 to 110 °C
- Volume Resistivity: 10^14 Ohm-cm
- Wall Thickness: 0.06 Inch (Total Recovered), 0.015 Inch (Meltable Recovered)
- Reflow Temperature: >80 °C
General Information
| Item Name | Heat Shrink Tubing |
| Trade Name | 3M |
| Series | EPS-200 |
General Features
| Shelf Life | 120 Months |
| Type | Adhesive-Lined |
Design & Construction
| Color | Black |
| Insulation Material | Flexible Polyolefin |
| Minimum Shrink Temperature | 121 °C |
| Wall Type | Dual-Thin |
Performance Details
| Flame Retardant | Yes |
| Heat Aging | 168 hr |
| Heat Shock | 4 hr |
| Low Temperature Flexibility | -55 °C |
| Shrink Ratio | 2:1 |
| Tensile Strength | 2100 psi |
Chemical Properties
| Specific Gravity | 1.3 |
Electrical Properties
| Dielectric Strength | 800 V/mil |
| Voltage Rating | 600 V |
Physical Properties
| Elongation | 450% |
| Expandable Diameter | 2 Inch |
| Length | 4 ft |
| Recovered Diameter | 1 Inch |
| Wall Thickness | 0.06 Inch |
| Water Absorption | 0.3% |
Environmental Condition
| Reflow Temperature | 80 °C |
| Temperature Rating | -55 to 110 °C |
Documents
No Documents Found