3M EPS-300 3:1 Adhesive-Lined Heat Shrink Tubing, 3/4", 4', Clear, MFR ID EPS300.75CLR
- MFR #:7010398851
- EIS #:EPS300.75CLR
- UPC #:51135372692
- MFR #:7010398851
- EIS #:EPS300.75CLR
- UPC #:51135372692
Available to Order
Min Qty:1
|Qty Increment:1
The heat-shrinkable outer wall is selectively cross-linked, while the adhesive maintains high flow and excellent adhesion characteristics.
3M™ Heat Shrink Tubing EPS-300 is a thin-wall tubing offering the advantages of integral, adhesive-lined construction. The tubing is made from flame-retardant, flexible polyolefin with an internal layer of special thermoplastic adhesive.
$393.52 / 100Foot
Min Qty:1
|Qty Increment:1
The heat-shrinkable outer wall is selectively cross-linked, while the adhesive maintains high flow and excellent adhesion characteristics.
3M™ Heat Shrink Tubing EPS-300 is a thin-wall tubing offering the advantages of integral, adhesive-lined construction. The tubing is made from flame-retardant, flexible polyolefin with an internal layer of special thermoplastic adhesive.
- Attributes
- Features
- Applications
Attributes
General Information
Item NameHeat Shrink Tubing
Trade Name3M
General Features
Shelf Life120 Months
Design & Construction
ColorClear
Insulation MaterialFlexible Polyolefin
Minimum Shrink Temperature121 °C
Wall TypeDual-Thin
Performance Details
Heat Aging168 hr
Heat Shock4 hr
Low Temperature Flexibility-55 °C
Shrink Ratio3:1
Tensile Strength2100 psi
Chemical Properties
Specific Gravity1.3
Electrical Properties
Dielectric Strength700 V/mil
Voltage Rating600 V
Physical Properties
Elongation450%
Expandable Diameter0.75 Inch
Length4 ft
Recovered Diameter0.25 Inch
Wall Thickness0.085 Inch
Water Absorption0.3%
Environmental Condition
Reflow Temperature80 °C
Temperature Rating-55 to 110 °C
Features
- When heated in excess of 121 °C (250 °F), EPS-300 tubing rapidly shrinks to a skintight fit, forcing the melted adhesive to flow and cover the substrate
- The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals
- Upon cooling, the adhesive solidifies forming a durable, non-drying, flexible and water resistant barrier
- When freely recovered, the tubing will shrink to 33% of its original diameter
- The recovered wall thickness of the tubing is proportional to the degree of recovery
- Non-corrosive chemical effect
- Non-nutrient fungus resistance
- Excellent fluid resistance
- Self-extinguishing
- No dripping, flowing or cracking (4 hr at 225 °C) of heat shock
- Volume Resistivity: 10^14 Ohm-cm
- Reflow Temperature: >80 °C
- Low Temperature Flexibility: -55 °C
- Temperature rating: -55 to 110 °C
- Wall Thickness: 0.085 Inch (Total Recovered), 0.035 Inch (Meltable Recovered)
Applications
- Offers Excellent Environmental Protection for Electronic Components, Wire Splices, Wire Bundles and Harness Breakouts, Automotive, Truck and Marine Wire Splices and Harness Breakouts are also Quickly and Easily Protected from a Variety of Harsh Environments
- Automotive, Truck and Marine Wiring Splices and Harness Breakouts are Quickly and Easily Protected from Harsh Environments