Elantas PDG Elan-Tron® C 105 Hardener, 10 lb/1 gal, MFR ID PDGC1051G
- MFR #:118161
- EIS #:PDGC1051G
- MFR #:118161
- EIS #:PDGC1051G
Available to Order
Min Qty:1
|Qty Increment:1
Elantas PDG Elan-Tron® C 105 Hardener, Room Temperature Cure Type, 1.4679 g/cm3 (77 °F (25 °C)) Density, >94 °C (ASTM D93) Flash Point, 10 - 16 hr Full Cure Time, 7 - 10 min At 110 °C/230 °F Gel Time, 67 Shore D Hardness, 100 (Parts By Weight) Mixing Ratio. - ELAN-Tron™ E 451 / C 105 is a two-component, room temperature curing, 100%-solids epoxy resin system.
$115.48 / US pound
Min Qty:1
|Qty Increment:1
Elantas PDG Elan-Tron® C 105 Hardener, Room Temperature Cure Type, 1.4679 g/cm3 (77 °F (25 °C)) Density, >94 °C (ASTM D93) Flash Point, 10 - 16 hr Full Cure Time, 7 - 10 min At 110 °C/230 °F Gel Time, 67 Shore D Hardness, 100 (Parts By Weight) Mixing Ratio. - ELAN-Tron™ E 451 / C 105 is a two-component, room temperature curing, 100%-solids epoxy resin system.
- Attributes
- Features
- Documents
Attributes
General Information
Item NameHardener
Trade NameElan-Tron®
SeriesElan-Tron® C 105
General Features
Net Weight12.0 - 12.4 lb/gal
Shelf Life12 Months
Design & Construction
Cure TypeRoom Temperature
FormLiquid
Performance Details
Full Cure Time10 - 16 hr
Gel Time7 min
Technical Details
Flash Point94 °C
Chemical Properties
Mixing Ratio100 (Parts By Weight)
Physical Properties
Container Size10 lb
Container TypeCan
Hardness67 Shore D
Features
- Convenient 1:1 volume mix ratio
- Thixotropic for vertical surfaces
- Room temperature or low bake cure
- Long pot life
- Chemical and moisture resistant
- Brush, spatula or putty knife application methods
- 1-1/2 hr at 25 °C / 77 °F - 250g pot life
- + 0.2% (24 hours at 25 °C / 77 °F), + 0.4% (24 hours in boiling water) water absorption
- 0.9% (24 hours at 180 °C / 356 °F) weight loss
- Thixotropic paste viscosity
- Gel Time: 30 - 50 min at 25 °C/77 °F (200 ml)
- Container Size: 10 lb/1 gal
- Flash Point: >94 °C (ASTM D93)
- Density: 1.4679 g/cm3 (77 °F (25 °C))
- Gel Time: 7 - 10 min