North American Electric F56C3/4S4C General Purpose Electric Motor, 3/4 HP, 1800 RPM, 56C Frame, 115/208-230V, 1PH, NEMA Design B, 60HZ, 1.15 S.F., TEFC, Gen Purp, Rolled Steel
MFR #:F56C3/4S4C
EIS #:F56C3/4S4C
MFR #:F56C3/4S4C
EIS #:F56C3/4S4C
Out of Stock
Min Qty:1
|Qty Increment:1
0.75 HP, Service factor: 1.15 @ 60 Hz, NEMA Design B Performance/ High starting torgue, Removable feet, 56CH frames: Dual-drilled feet for 56C and 143/ 5T mounting flexibility, Capacitor start/ capacitor run design, Class F insulation system, Class B rise at full load, Class H vacuum pressure impregnation (VPI) resin for all windings, Corrosion-resistant epoxy paint, stainless steel nameplate and zinc plated hardware and aluminum endbells, IP55 protection, Condensation drain with plugs - Single phase, 0.75 HP, C-Flange w/ feet, Totally enclosed fan cooled (TEFC), 56C/CH frame, Service factor: 1.15 @ 60 Hz, NEMA Design B Performance/ High starting torgue, Removable feet, 56CH frames: Dual-drilled feet for 56C and 143/ 5T mounting flexibility, Capacitor start/ capacitor run design
$284.53 / Piece
Min Qty:1
|Qty Increment:1
0.75 HP, Service factor: 1.15 @ 60 Hz, NEMA Design B Performance/ High starting torgue, Removable feet, 56CH frames: Dual-drilled feet for 56C and 143/ 5T mounting flexibility, Capacitor start/ capacitor run design, Class F insulation system, Class B rise at full load, Class H vacuum pressure impregnation (VPI) resin for all windings, Corrosion-resistant epoxy paint, stainless steel nameplate and zinc plated hardware and aluminum endbells, IP55 protection, Condensation drain with plugs - Single phase, 0.75 HP, C-Flange w/ feet, Totally enclosed fan cooled (TEFC), 56C/CH frame, Service factor: 1.15 @ 60 Hz, NEMA Design B Performance/ High starting torgue, Removable feet, 56CH frames: Dual-drilled feet for 56C and 143/ 5T mounting flexibility, Capacitor start/ capacitor run design
- Attributes
- Features
Attributes
General Information
Item NameGeneral Purpose Electric Motor
General Features
Net Weight29 lb
Design & Construction
Bearing TypeRadial Ball
Frame Type56C
KVA CodeM
Performance Details
Speed Rating1800 rpm
Full Load Efficiency69%
1/2 Load Efficiency68.4%
3/4 Load Efficiency69.6%
Torque Rating0.78 lb-ft
Electrical Properties
Full Load Ampere3 A
Full Load Power Factor88%
1/2 Load Power Factor85.8%
HP Rating0.75 HP
Locked Rotor Ampere23 A
3/4 Load Power Factor86.4%
Physical Properties
Dimensions13.9 Inch L x 8.6 Inch H
Weight29 lb
Features
- High efficiency design
- IP55 protection as standard, suitable for indoor/outdoor use
- 40 °C ambient continuous duty
- Stainless steel nameplate and zinc plated hardware
- Meets or exceeds NRCan efficiency requirements
- 56CH frames feet are dual drilled for mounting flexibility
- Automatic overload protected
- High starting torques
- 1.15 service factor at 60 Hz
- NEMA design B performance
- Vacuum pressure impregnation for all windings
- Rolled steel frame construction, aluminum end bells
- Sealed bearings
- C-flange with removable feet as standard
- Class F insulation system, class B rise at full load
- Temperature Rating: 40 °C Ambient
- Voltage Rating: 115/208 - 230V
- Full Load Ampere: 3A at 230V
- Locked Rotor Ampere: 23A at 230V
- Torque Rating: 0.78 lb-ft (Full Load), 320 lb-ft (Break Down), 260 lb-ft (Locked Rotor)