Elantas PDG Epoxylite® E577 Single-Component Epoxy VPI Resin
MFR #:EPOE577LVX3170LB
EIS #:PH21-Epoxylite E577
MFR #:EPOE577LVX3170LB
EIS #:PH21-Epoxylite E577
Epoxylite® E 577 is a single-component, heat cured, epoxy resin system designed for use with uncatalyzed tapes. Vacuum-pressure impregnation, vacuum impregnation, dip-and-bake application methods. - The industry standard for the high voltage power generation industry. Offers thermal ratings up to 200 °C. Chemical-resistant for operation in corrosive environments. Excellent stability.
$42.60
- $54.00
Select from the options below
Epoxylite® E 577 is a single-component, heat cured, epoxy resin system designed for use with uncatalyzed tapes. Vacuum-pressure impregnation, vacuum impregnation, dip-and-bake application methods. - The industry standard for the high voltage power generation industry. Offers thermal ratings up to 200 °C. Chemical-resistant for operation in corrosive environments. Excellent stability.
Product Options
Showing 3 out of 3 options
 | Type: Single-Component | Container Size: 3170 lb | EIS Part #: EPOE577TOTE | $ / US pound | |
| Type: Single-Component, High Voltage | Container Size: 500 lb | EIS Part #: EPOE577LVX480LB | $ / US pound | |
| Type: Single-Component, High Voltage | Container Size: 3170 lb | EIS Part #: EPOE577LVX3170LB | $ / US pound |
- Attributes
- Features
- Applications
- Documents
Attributes
General Information
Item NameEpoxy VPI Resin
Trade NameEpoxylite®
SeriesEpoxylite® E577LV
General Features
Shelf Life12 Months
Design & Construction
Base TypeEpoxy
Performance Details
Full Cure Time8 hr at 163 °C/325 °F
Gel Time10 min
Technical Details
Flash Point94 °C
Chemical Properties
Viscosity1000 cP
Electrical Properties
Dielectric Strength4100 V/mil
Physical Properties
Hardness85 Shore D at 25 °C/77 °F
Features
- No separate catalyst required. Store below 25 °C / 77 °F in a dry controlled environment out of direct sunlight
- 128 °C glass transition temperature
- 52 ppm / °C (below Tg), 203 ppm / °C (above Tg) coefficient of thermal expansion
- > 1 x 10^16 ohm-cm (ASTM D257 - 25 °C / 77 °F) volume resistivity
- 0.004 at 1 kHz - 25 °C / 77 °F, 0.06 at 1 kHz - 100 °C / 212 °F, 0.01 at 1 kHz - 150 °C / 302 °F, 0.40 at 1 kHz - 200 °C / 392 °F dissipation factor (ASTM D150)
- 3.2 at 1 kHz - 25 °C / 77 °F, 3.3 at 1 kHz - 100 °C / 212 °F, 3.5 at 1 kHz - 150 °C / 302 °F, 4.6 at 1 kHz - 200 °C / 392 deg dielectric constant (ASTM D150)
- Secondary insulation
- Gel Time: 10 - 20 min at 150 °C/302 °F (Sunshine)
- Container Size: 3170 lb/330 gal
- Dielectric Strength: 4100 V/Mil at ASTM D149 - 0.3 Mil, 3600 at ASTM D149 - 0.3 Mil After 24 hr in Water
- Flash Point: >94 °C (ASTM D93)
- Viscosity: 1000 - 3000 CP at 25 °C/77 °F
- Gel Time: 10 - 20 min
- Viscosity: 1000 - 3000 cP
Applications
- Impregnation of High Voltage Motors and Generators Up to 13.8 kV