Elantas PDG RanVar™ B9-116 Single-Component Epoxy VPI Resin, 528 lb/55 gal, MFR ID B9116528LB
- MFR #:119338
- EIS #:B9116528LB
- MFR #:119338
- EIS #:B9116528LB
Available to Order
Min Qty:1
|Qty Increment:1
Elantas PDG RanVar™ B9-116 Single-Component Epoxy VPI Resin, Epoxy Base Type, 2900 V/Mil At ASTM D149 - 4 Mil, 2650 V/Mil At ASTM D149 - 4 Mil (After 24 hr in Water) Dielectric Strength, >94 °C (ASTM D93) Flash Point, 2 hr At 163 °C/325 °F or four hr At 149 °C/300 °F Full Cure Time, 10 - 30 min At 165 °C/329 °F (Sunshine) Gel Time, 80 Shore D At 25 °C/77 °F Hardness, 10000 - 14000 CP At 25 °C/77 °F, 2 rpm, 3000 - 5000 CP At 25 °C/77 °F, 20 rpm Viscosity. - RanVar™ B9-116 is a single-component, heat cured, epoxy impregnating resin.
$25.10 / US pound
Min Qty:1
|Qty Increment:1
Elantas PDG RanVar™ B9-116 Single-Component Epoxy VPI Resin, Epoxy Base Type, 2900 V/Mil At ASTM D149 - 4 Mil, 2650 V/Mil At ASTM D149 - 4 Mil (After 24 hr in Water) Dielectric Strength, >94 °C (ASTM D93) Flash Point, 2 hr At 163 °C/325 °F or four hr At 149 °C/300 °F Full Cure Time, 10 - 30 min At 165 °C/329 °F (Sunshine) Gel Time, 80 Shore D At 25 °C/77 °F Hardness, 10000 - 14000 CP At 25 °C/77 °F, 2 rpm, 3000 - 5000 CP At 25 °C/77 °F, 20 rpm Viscosity. - RanVar™ B9-116 is a single-component, heat cured, epoxy impregnating resin.
- Attributes
- Features
- Applications
- Documents
Attributes
General Information
Item NameEpoxy VPI Resin
Trade NameRanVar™
SeriesRanVar™ B9-116
General Features
Net Weight9.6 - 9.9 lb/gal
Shelf Life6 Months
TypeSingle-Component
Design & Construction
Base TypeEpoxy
Performance Details
Full Cure Time2 hr at 163 °C/325 °F or 4 hr at 149 °C/300 °F
Gel Time10 min
Technical Details
Flash Point94 °C
Chemical Properties
Viscosity10000 cP
Electrical Properties
Dielectric Strength2900 V/mil
Physical Properties
Container Size528 lb
Container TypeDrum
Hardness80 Shore D at 25 °C/77 °F
Features
- High flash point
- Excellent chemical resistance and elevated temperature bond strength
- Refrigerant-resistant
- Thixotropic for high build and improved resin retention
- No separate catalyst required
- UL recognized insulation systems up to class 220
- Dip-and-bake, vacuum impregnation, vacuum-pressure impregnation application methods
- 57 Pounds at 25 °C / 77 °F, 14 Pounds at 150 °C / 302 °F helical coil bond strength (ASTM D2519)
- <1% (NEMA RE-2) freon extractable material
- Secondary insulation
- Container Size: 528 lb/55 gal
- Dielectric Strength: 2900 V/Mil at ASTM D149 - 4 Mil, 2650 V/Mil at ASTM D149 - 4 Mil (After 24 hr in Water)
- Flash Point: >94 °C (ASTM D93)
- Viscosity: 10000 - 14000 CP at 25 °C/77 °F, 2 rpm, 3000 - 5000 CP at 25 °C/77 °F, 20 rpm
- Gel Time: 10 - 30 min
- Viscosity: 10000 - 14000 cP
Applications
- For Impregnation of Transformers, Motor Windings and Form-Wound Coils