Elantas PDG Elan-Tron® E203 Two-Component Epoxy Sealer Resin, 2 lb/1 qt, Black, MFR ID E203QT
- MFR #139591
- EIS #E203QT
$131.74 / US pound
Available to Order
Refine your product below or compare all choices in the
Min QTY1QTY Increment1
more info
Products You May Also Like
| Stock Status | |||
|---|---|---|---|
 | Part A | $ / US pound more info | |
| Kit | $ / each |
ELAN-Tron® E 203 black is a highly adhesive, chemical-resistant, general-purpose epoxy system. Typical maintenance and repair applications. - A two-component epoxy sealer supplied as a viscous resin, ELAN-Tron® E 203 black, and a fluid liquid hardener, ELAN-Tron C 301. When mixed, the paste cures at room temperature.
Features
- 2,500 psi adhesive strength
- 16,000 psi compressive strength
- 0.1% water absorption (24 hr)
- 0.2% shrinkage
- 3.3 at 1 kHz dielectric constant, 25 °C / 77 °F
- 2 x 10^15 ohm/cm volume resistivity
- < 0.1 pounds/gallon VOC (ASTM D6053)
- Store below 25 °C / 77 °F in a dry controlled environment out of direct sunlight
- Container Size: 2 lb/1 qt
- Flash Point: Greater Than 201 °F/94 °C (ASTM D93)
- Viscosity: Greater Than 22 mm2/s/104 °F/40 °C) Kinematic
- Density: 1.6320 g/cm3 (77 °F (25 °C))
Applications
- Bonding Broken Ceramic Bushings, Sealing Cracks in Diesel Engine a Frames, Chokes, Toroids, Ballasts, Power Supplies, Electromagnetic Devices, Lifting Magnets, Sealing Leaking transformers, Repairing Glass-Lined Vats
General Information
| Item Name | Epoxy Sealer Resin |
| Trade Name | Elan-Tron® |
| Series | Elan-Tron® E203 |
General Features
| Type | Part A |
| Shelf Life | 12 Months |
Design & Construction
| Base Type | Epoxy |
| Color | Black |
| Cure Type | Room Temperature |
| Form | Paste |
Performance Details
| Flexural Strength | 18000 psi |
| Full Cure Time | 60 min at 25 °C (77 °F) |
| Tensile Strength | 8000 psi |
Electrical Properties
| Dielectric Strength | 500 V/Mil |
Physical Properties
| Container Size | 2 lb |
| Hardness | 35 Shore D (BARCOL) |