Elantas PDG Elan-Tron® E211 Two-Component Epoxy Sealer Resin, 2 lb, Blue
MFR #:139501
EIS #:E211QT
MFR #:139501
EIS #:E211QT
Out of Stock
Min Qty:1
|Qty Increment:1
ELAN-Tron® E 211 blue resin is a 100%-solids, two-component epoxy system. It is available as individual components or in 100-gram pre-measured kits (ELAN-Tron® E 211 Blue Epoxy Kit). - Elantas PDG Elan-Tron® E211 Two-Component Epoxy Sealer Resin.
$162.37 / US pound
Min Qty:1
|Qty Increment:1
ELAN-Tron® E 211 blue resin is a 100%-solids, two-component epoxy system. It is available as individual components or in 100-gram pre-measured kits (ELAN-Tron® E 211 Blue Epoxy Kit). - Elantas PDG Elan-Tron® E211 Two-Component Epoxy Sealer Resin.
- Attributes
- Features
- Applications
- Documents
Attributes
General Information
Item NameEpoxy Sealer Resin
Trade NameElan-Tron®
SeriesElan-Tron® E211
General Features
Net Weight12.1 - 12.5 lb/gal
Shelf Life12 Months
TypeTwo-Component
Design & Construction
Base TypeEpoxy
ColorBlue
Cure TypeRoom Temperature
FormLiquid
Performance Details
Tensile Strength8500 psi
Full Cure Time2 hr at 80 °C/175 °F
Technical Details
Flash Point94 °C
Chemical Properties
Viscosity - Part-A60000 cP
Viscosity - Part-B5 cP
Mixing Ratio100 (Parts By Weight) Resin, 6.5 (Parts By Weight) Hardener
Physical Properties
Container Size2 lb
Features
- Electrically insulating, abrasion-resistant
- Brushable for high build-up with a single application
- Excellent resistance to chemicals and moisture
- Room temperature cure
- Brush, spatula application methods
- Store below 25 °C / 77 °F in a dry controlled environment out of direct sunlight
- 30 min at 25 °C / 77 °F Pot life
- 3200 PSI at 25 °C / 77 °F lap shear strength
- 0.1% (24 hours at 25 °C / 77 °F) water absorption
- Gel Time: 15 - 25 min at 25 °C/77 °F (250 g)
- Flash Point: >94 °C (ASTM D93)
- Density: 1.4760 g/cm3 (77 °F (25 °C))
- Viscosity - Part-B: 5 - 10 CP at 25 °C/77 °F
- Tensile Strength: 8500 psi at 25 °C/77 °F
- Viscosity - Part-A: 60000 - 90000 cP
- Viscosity - Part-B: 5 - 10 cP
Applications
- Chokes
- Toroids
- Ballast Insulation
- Power Supplies
- Electromagnetic Devices
- Lifting Magnets
- Protective Coating
- Sealant and Adhesive for Metals
- Plastics
- Ceramics and Other Surfaces
- Casting or Potting of Small Electrical Components
- Preparation of Epoxy-Glass Laminates