Elantas PDG Epoxylite® E8117 Two-Component Epoxy Resin Stator Paste
MFR #:Epoxylite® E8117
EIS #:PH21-Epoxylite E8117
MFR #:Epoxylite® E8117
EIS #:PH21-Epoxylite E8117
Elantas PDG Epoxylite® E8117 Two-Component Epoxy Resin Stator Paste, Epoxy Base Type, Room Temperature Cure Type, 1.7195 g/cm3 (77 °F (25 °C)) Density, 470 V/Mil At 25 °C/77 °C (30 Mil), 350 V/Mil At 25 °C/77 °C (30 Mil) After 24 hr In Water Dielectric Strength, >94 °C (ASTM D93) Flash Point, 24 hr Full Cure Time, 2 - 3 hr Gel Time, 86 Shore D Hardness, 100 (Parts By Weight), 100 (Parts By Volume) Mixing Ratio, Greater Than 22 mm2/s (104 °F (40 °C)) Kinematic Viscosity. - Epoxylite® E 8117 is a two-component, room temperature cure, mineral-filled epoxy resin.
$154.29
- $1,622.21
Select from the options below
Elantas PDG Epoxylite® E8117 Two-Component Epoxy Resin Stator Paste, Epoxy Base Type, Room Temperature Cure Type, 1.7195 g/cm3 (77 °F (25 °C)) Density, 470 V/Mil At 25 °C/77 °C (30 Mil), 350 V/Mil At 25 °C/77 °C (30 Mil) After 24 hr In Water Dielectric Strength, >94 °C (ASTM D93) Flash Point, 24 hr Full Cure Time, 2 - 3 hr Gel Time, 86 Shore D Hardness, 100 (Parts By Weight), 100 (Parts By Volume) Mixing Ratio, Greater Than 22 mm2/s (104 °F (40 °C)) Kinematic Viscosity. - Epoxylite® E 8117 is a two-component, room temperature cure, mineral-filled epoxy resin.
Product Options
Showing 2 out of 2 options
 | Container Size: 1 lb | EIS Part #: EPO81172LB | $ / Pint US l | |
| Container Size: 16 lb | EIS Part #: EPO811716LB | $ / US gallon |
- Attributes
- Features
- Applications
- Documents
Attributes
General Information
Item NameEpoxy Resin Stator Paste
Trade NameEpoxylite®
SeriesEpoxylite® E8117
General Features
Net Weight13.1 - 13.5 lb/gal
Shelf Life12 Months
TypeTwo-Component
Design & Construction
Base TypeEpoxy
ColorGreen
Cure TypeRoom Temperature
FormPaste
Performance Details
Full Cure Time24 hr
Gel Time2 hr
Technical Details
Flash Point94 °C
Chemical Properties
Mixing Ratio100 (Parts By Weight), 100 (Parts By Volume)
Electrical Properties
Dielectric Strength470 V/mil
Physical Properties
Hardness86 Shore D
Features
- Provides environmental protection for stators that do not require full encapsulation
- Highly thixotropic paste
- Chemical and moisture resistant
- Spatula application method
- 74 °C (TMA) glass transition temperature
- 0.2% (24 hours at 25 °C / 77 °F) water absorption
- 3.6 x 10^14 ohm-cm at 25 °C / 77 °F volume resistivity
- 0.02 at kHz - 25 °C / 77 °F, 0.02 at 1 kHz - 50 °C / 122 °F, 0.16 at 1 kHz - 100 °C / 212 °F dissipation factor
- 2.8 at kHz - 25 °C / 77 °F, 2.9 at 1 kHz - 50 °C / 122 °F, 4.3at 1 kHz - 100 °C / 212 °F dielectric constant
- Secondary insulation
- Dielectric Strength: 470 V/Mil at 25 °C/77 °C (30 Mil), 350 V/Mil at 25 °C/77 °C (30 Mil) After 24 hr In Water
- Flash Point: >94 °C (ASTM D93)
- Viscosity: Greater Than 22 mm2/s/104 °F/40 °C) Kinematic
- Density: 1.7195 g/cm3 (77 °F (25 °C))
- Gel Time: 2 - 3 hr
Applications
- For Buttering or Sealing of Stator End Windings