Elantas PDG Elan-Cast® E471-5LL FR Two-Component Epoxy Potting Compound
MFR #:Elan-Cast® E471-5LL FR
EIS #:PH21-Elan-Cast E471-5LL FR
MFR #:Elan-Cast® E471-5LL FR
EIS #:PH21-Elan-Cast E471-5LL FR
Elantas PDG Elan-Cast® E471-5LL FR Two-Component Epoxy Potting Compound, Epoxy Base Type, Room Temperature Cure Type, 1.6656 g/cm3 (77 °F (25 °C)) Density, 510 V/Mil At 125 Mil, ASTM D149, 480 V/Mil At 125 Mil, ASTM D149 (After 24 hr in Water) Dielectric Strength, 5% At Break (ASTM D229) Elongation, >94 °C (ASTM D93) Flash Point, 17000 psi (ASTM D790) Flexural Strength, 4 hr At 80 °C Full Cure Time, 6 - 10 hrs At 25 °C/77 °F - 150g Gel Time, 80 Shore D Hardness, 100 (Parts By Weight And Volume) Resin, 15 (Parts By Weight) 26 (Parts By Volume) Hardener Mixing Ratio, 5700 psi (ASTM D229) Tensile Strength, 0.5 W/mK Thermal Conductivity, 2000 - 3000 CP At 25 °C/77 °F Viscosity, 12500 - 25000 CP At 25 °C/77 °F Viscosity - Part-A, 20 - 50 CP At 25 °C/77 °F Viscosity - Part-B. - ELAN-Cast® E 471-5LL FR black is a two-component, room temperature curing, 100% solids epoxy resin system.
$40.62
- $41.78
Select from the options below
Elantas PDG Elan-Cast® E471-5LL FR Two-Component Epoxy Potting Compound, Epoxy Base Type, Room Temperature Cure Type, 1.6656 g/cm3 (77 °F (25 °C)) Density, 510 V/Mil At 125 Mil, ASTM D149, 480 V/Mil At 125 Mil, ASTM D149 (After 24 hr in Water) Dielectric Strength, 5% At Break (ASTM D229) Elongation, >94 °C (ASTM D93) Flash Point, 17000 psi (ASTM D790) Flexural Strength, 4 hr At 80 °C Full Cure Time, 6 - 10 hrs At 25 °C/77 °F - 150g Gel Time, 80 Shore D Hardness, 100 (Parts By Weight And Volume) Resin, 15 (Parts By Weight) 26 (Parts By Volume) Hardener Mixing Ratio, 5700 psi (ASTM D229) Tensile Strength, 0.5 W/mK Thermal Conductivity, 2000 - 3000 CP At 25 °C/77 °F Viscosity, 12500 - 25000 CP At 25 °C/77 °F Viscosity - Part-A, 20 - 50 CP At 25 °C/77 °F Viscosity - Part-B. - ELAN-Cast® E 471-5LL FR black is a two-component, room temperature curing, 100% solids epoxy resin system.
Product Options
Showing 2 out of 2 options
 | Container Size: 50 lb | EIS Part #: E4715LLFR50LB | $ / US pound | |
| Container Size: 13 lb | EIS Part #: E4715LLFR13LB | $ / US pound |
- Attributes
- Features
- Applications
- Documents
Attributes
General Information
Item NameEpoxy Potting Compound
Trade NameElan-Cast®
SeriesElan-Cast® E471-5LL FR
General Features
Net Weight13.8 - 14.0 lb/gal
Shelf Life12 Months
TypeTwo-Component
Design & Construction
Base TypeEpoxy
ColorBlack
Cure TypeRoom Temperature
FormLiquid
Performance Details
Tensile Strength5700 psi
Flexural Strength17000 psi
Full Cure Time4 hr at 80 °C
Gel Time6 hr
Thermal Conductivity0.5 W/mK
Technical Details
Flash Point94 °C
Chemical Properties
Viscosity2000 cP
Viscosity - Part-A12500 cP
Viscosity - Part-B20 cP
Mixing Ratio100 (Parts By Weight and Volume) Resin, 15 (Parts By Weight) 26 (Parts By Volume) Hardener
Electrical Properties
Dielectric Strength510 V/mil
Physical Properties
Elongation5% at Break (ASTM D229)
Hardness80 Shore D
Features
- Low stress, low exotherm cure
- UL 94 V0 listed - 2.9 mm
- Low shrinkage
- Long pot life
- Bench casting, meter-mix application methods
- Store below 25 °C / 77 °F in a dry controlled environment out of direct sunlight
- 50 °C glass transition temperature
- 40 ppm / °C (below Tg), 195 ppm / °C (above Tg) coefficient of thermal expansion
- 0.4% (168 hours at 25 °C / 77 °F) water absorption
- 0.5% (168 hours at 135 °C / 275 °F) weight loss
- 1.5 x 10^14 ohm-cm (ASTM D257 - 25 °C / 77 °C) volume resistivity
- 4.2 at 1 kHz - 25 °C / 77 °F dielectric constant
- 0.03 at 1 kHz - 25 °C / 77 °F dissipation factor
- Gel Time: 6 - 10 hr
- Viscosity: 2000 - 3000 cP
- Viscosity - Part-A: 12500 - 25000 cP
- Viscosity - Part-B: 20 - 50 cP
Applications
- Potting and Sealing of Electrical and Electronic Equipment
- Electromagnetic Devices
- Low Voltage Transformers
- Chokes
- Toroids
- Ballast Insulation
- Power Supplies
- Lifting Magnets