Elantas PDG Ripley™ E468-2FC Single-Component Epoxy Impregnating Resin
MFR #:Ripley™ E468-2FC
EIS #:PH21-Ripley E468-2FC
MFR #:Ripley™ E468-2FC
EIS #:PH21-Ripley E468-2FC
Elantas PDG Ripley™ E468-2FC Single-Component Epoxy Impregnating Resin, Epoxy Base Type, 1.0308 g/cm3 (77 °F (25 °C)) Density, 6400 V/Mil At 0.25 Mil - 25 °C/77 °F, 5400 V/Mil At 0.25 Mil - 25 °C/77 °F (After 24 hr in Water) Dielectric Strength, >94 °C (ASTM D93) Flash Point, 4 hr At 135 °C/275 °F or 3 hr At 150 °C/302 °F Full Cure Time, 10 - 20 min At 135 °C/275 °F (Sunshine) Gel Time, 55 Shore D At 25 °C/77 °F (ASTM D2240) Hardness, 300 - 1000 CP At 25 °C/77 °F Viscosity. - Ripley™ E 468-2-FC is a single-component, heat cured, 100% solids epoxy impregnating resin.
$22.83
- $30.05
Select from the options below
Elantas PDG Ripley™ E468-2FC Single-Component Epoxy Impregnating Resin, Epoxy Base Type, 1.0308 g/cm3 (77 °F (25 °C)) Density, 6400 V/Mil At 0.25 Mil - 25 °C/77 °F, 5400 V/Mil At 0.25 Mil - 25 °C/77 °F (After 24 hr in Water) Dielectric Strength, >94 °C (ASTM D93) Flash Point, 4 hr At 135 °C/275 °F or 3 hr At 150 °C/302 °F Full Cure Time, 10 - 20 min At 135 °C/275 °F (Sunshine) Gel Time, 55 Shore D At 25 °C/77 °F (ASTM D2240) Hardness, 300 - 1000 CP At 25 °C/77 °F Viscosity. - Ripley™ E 468-2-FC is a single-component, heat cured, 100% solids epoxy impregnating resin.
Product Options
Showing 3 out of 3 options
 | Container Size: 440 lb | EIS Part #: E4682FCDRUM | $ / US pound | |
| Container Size: 8 lb | EIS Part #: E4682FC8LB | $ / US pound | |
| Container Size: 40 lb | EIS Part #: E4682FC40LB | $ / US pound |
- Attributes
- Features
- Applications
- Documents
Attributes
General Information
Item NameEpoxy Impregnating Resin
Trade NameRipley™
SeriesRipley™ E468-2FC
General Features
Net Weight8.4 - 8.8 lb/gal
Shelf Life6 Months
TypeSingle-Component
Design & Construction
Base TypeEpoxy
Cure TypeFast
FormLiquid
Performance Details
Full Cure Time4 hr at 135 °C/275 °F or 3 hr at 150 °C/302 °F
Gel Time10 min
Technical Details
Flash Point94 °C
Chemical Properties
Viscosity300 cP
Electrical Properties
Dielectric Strength6400 V/mil
Physical Properties
Hardness55 Shore D at 25 °C/77 °F (ASTM D2240)
Features
- Flexible for excellent noise suppression
- No catalyst required
- High flash point
- UL recognized insulation systems up to class 240
- Vacuum-pressure impregnation, vacuum impregnation, dip-and-bake application methods
- Store below 25 °C / 77 °F in a dry controlled environment out of direct sunlight
- 0.5 pounds / gallon (ASTM D6053-96) volatile organic content
- 38 °C (TMA) glass transition temperature
- 150 ppm / °C (below Tg), 250 ppm / °C (above Tg) coefficient of thermal expansion
- 0.02 at 1 kHz - 25 °C / 77 °F dissipation factor (ASTM D150)
- 3.0 at 1 kHz - 25 °C / 77 °F dielectric constant (ASTM D150)
- 5.1 x 10^15 ohm-cm at 25 °C / 77 °F volume resistivity (ASTM D257)
- Secondary insulation
- Gel Time: 10 - 20 min
- Viscosity: 300 - 1000 cP
Applications
- The Ripley™ E 468 Product Line Is the Industry Standard for Impregnation of Transformers of All Sizes