MFR #:Ripley™ E468-2
EIS #:PH21-Ripley E468-2
MFR #:Ripley™ E468-2
EIS #:PH21-Ripley E468-2
Elantas PDG Ripley™ E468-2 Single-Component Epoxy Impregnating Resin, Epoxy Base Type, 1.0293 g/cm3 (77 °F (25 °C)) Density, 2200 V/Mil At 0.25 Mil - 25 °C/77 °F, 1800 V/Mil At 0.25 Mil - 25 °C/77 °F (After 24 hr in Water) Dielectric Strength, >94 °C (ASTM D93) Flash Point, 5 hr At 135 °C/275 °F or 3 hr At 150 °C/302 °F Full Cure Time, 50 - 80 min At 135 °C/275 °F (Sunshine) Gel Time, 42 Shore D At 25 °C/77 °F Hardness, 300 - 700 CP At 25 °C/77 °F Viscosity. - Ripley™ E 468-2 is a single-component, heat cured, 100% solids epoxy impregnating resin, secondary insulation, vacuum-pressure impregnation, vacuum impregnation, dip-and-bake application methods.
$23.99
- $29.74
Select from the options below
Elantas PDG Ripley™ E468-2 Single-Component Epoxy Impregnating Resin, Epoxy Base Type, 1.0293 g/cm3 (77 °F (25 °C)) Density, 2200 V/Mil At 0.25 Mil - 25 °C/77 °F, 1800 V/Mil At 0.25 Mil - 25 °C/77 °F (After 24 hr in Water) Dielectric Strength, >94 °C (ASTM D93) Flash Point, 5 hr At 135 °C/275 °F or 3 hr At 150 °C/302 °F Full Cure Time, 50 - 80 min At 135 °C/275 °F (Sunshine) Gel Time, 42 Shore D At 25 °C/77 °F Hardness, 300 - 700 CP At 25 °C/77 °F Viscosity. - Ripley™ E 468-2 is a single-component, heat cured, 100% solids epoxy impregnating resin, secondary insulation, vacuum-pressure impregnation, vacuum impregnation, dip-and-bake application methods.
Product Options
Showing 2 out of 2 options
Container Size: 8 lb | EIS Part #: E46828LB | $ / US pound | ||
Container Size: 40 lb | EIS Part #: E468240LB | $ / US pound |
- Attributes
- Features
- Applications
- Documents
Attributes
General Information
Item NameEpoxy Impregnating Resin
Trade NameRipley™
SeriesRipley™ E468-2
General Features
Net Weight8.4 - 8.8 lb/gal
Shelf Life6 Months
TypeSingle-Component
Design & Construction
Base TypeEpoxy
FormLiquid
Performance Details
Full Cure Time5 hr at 135 °C/275 °F or 3 hr at 150 °C/302 °F
Gel Time50 min
Technical Details
Flash Point94 °C
Chemical Properties
Viscosity300 cP
Electrical Properties
Dielectric Strength2200 V/Mil
Physical Properties
Hardness42 Shore D at 25 °C/77 °F
Features
- Flexible for excellent noise suppression
- No separate catalyst required
- High flash point
- UL recognized insulation systems up to class 240
- 38 °C (TMA) glass transition temperature
- 144 ppm / °C (below Tg), 234 ppm / °C (above Tg) coefficient of thermal expansion
- 0.03 at 1 kHz - 25 °C / 77 °F dissipation factor
- 3.3 at 1 kHz - 25 °C / 77 °F dielectric constant
- 3.3 x 10^14 ohm-cm at 25 °C / 77 °F volume resistivity
- Gel Time: 50 - 80 min
- Viscosity: 300 - 700 cP
Applications
- The Ripley™ E 468-2 Product Line Is the Industry Standard for Impregnation of Transformers of All Sizes