Elantas PDG Elan-Guard® EM 59-60MR Single-Component Emulsion Epoxy Hermetic Resin, 475 lb, MFR ID PDGEMGRC596055G
- MFR #:129827
- EIS #:PDGEMGRC596055G
- MFR #:129827
- EIS #:PDGEMGRC596055G
Available to Order
Min Qty:1
|Qty Increment:1
Elantas PDG Elan-Guard® EM 59-60MR Single-Component, Emulsion Epoxy Hermetic Resin, Epoxy Base Type, 1.0916 g/cm3 (77 °F (25 °C)) Density, 3500 V/Mil (As Made ASTM D149), 3200 V/Mil (ASTM D149 After 24 hr in Water) Dielectric Strength, 100 °C Flash Point, 4 hr At 150 °C/302 °F or 2 hr At 165 °C/329 °F Full Cure Time, 500 - 1500 CP At 25 °C/77 °F Viscosity. - EM 59-60MR is single component water based hermetic resin. In the liquid state it is a white opaque liquid.
$30.30 / US pound
Min Qty:1
|Qty Increment:1
Elantas PDG Elan-Guard® EM 59-60MR Single-Component, Emulsion Epoxy Hermetic Resin, Epoxy Base Type, 1.0916 g/cm3 (77 °F (25 °C)) Density, 3500 V/Mil (As Made ASTM D149), 3200 V/Mil (ASTM D149 After 24 hr in Water) Dielectric Strength, 100 °C Flash Point, 4 hr At 150 °C/302 °F or 2 hr At 165 °C/329 °F Full Cure Time, 500 - 1500 CP At 25 °C/77 °F Viscosity. - EM 59-60MR is single component water based hermetic resin. In the liquid state it is a white opaque liquid.
- Attributes
- Features
- Applications
- Documents
Attributes
General Information
Item NameEpoxy Hermetic Resin
Trade NameElan-Guard®
SeriesElan-Guard® EM 59-60MR
General Features
Shelf Life12 Months
TypeSingle-Component, Emulsion
Design & Construction
Base TypeEpoxy
FormLiquid
Performance Details
Full Cure Time4 hr at 150 °C/302 °F or 2 hr at 165 °C/329 °F
Technical Details
Flash Point100 °C
Chemical Properties
Viscosity500 cP
Electrical Properties
Dielectric Strength3500 V/mil
Physical Properties
Container Size450 lb
Container TypeDrum
Features
- Low viscosity
- Thinned with water
- UL recognized insulation systems from 130 °C to 200 °C
- Excellent stability
- Zero volatile organic compounds (VOC)
- Dip-and-bake, roll dip application methods
- This resin should be stored at 25 °C / 77 °F in a dry controlled environment out of direct sunlight
- 58 - 62% (ASTM D115) percent non-volatile matter
- 65 Pounds at 25 °C / 77 °F, 38 Pounds at 107 °C / 225 °F helical coil bond strength (ASTM D2519)
- < 1.0% (NEMA RE-2) freon resistance
- 1.1 Mils film thickness
- Secondary insulation
- Dielectric Strength: 3500 V/Mil (As Made ASTM D149), 3200 V/Mil (ASTM D149 After 24 hr in Water)
- Viscosity: 500 - 1500 CP at 25 °C/77 °F
- Density: 1.0916 g/cm3 (77 °F (25 °C))
- Viscosity: 500 - 1500 cP
Applications
- Impregnation of Small and Large Hermetic Stators