Elantas PDG Sterling® C 12 Two-Component Epoxy Hardener
MFR #:Sterling® C 12
EIS #:PH21-Sterling C 12
MFR #:Sterling® C 12
EIS #:PH21-Sterling C 12
Elantas PDG Sterling® C 12 Two-Component Epoxy Hardener, Epoxy Base Type, Room Temperature Cure Type, 1.0440 g/cm3 (77 °F (25 °C)) Density, 300 V/Mil (ASTM D149-125 Mil) Dielectric Strength, >94 °C (ASTM D93) Flash Point, 4 - 8 hr At 25 °C/77 °F Full Cure Time, 15 - 25 min At 25 °C/77 °F (250 g) Gel Time, 82 Shore D (ASTM D2240) Hardness, 100 (Parts By Weight And Volume) Resin, 12.5 (Parts By Weight) 19.5 (Parts By Volume) Hardener Mixing Ratio, 50000 - 100000 CP At 25 °C/77 °F Viscosity, 400 - 800 CP At 25 °C/77 °F Viscosity - Part-B. - Sterling® E 400/C 12 hardener is a two-component, room temperature curing, 100%- solids resin system.
$64.93
- $72.51
Select from the options below
Elantas PDG Sterling® C 12 Two-Component Epoxy Hardener, Epoxy Base Type, Room Temperature Cure Type, 1.0440 g/cm3 (77 °F (25 °C)) Density, 300 V/Mil (ASTM D149-125 Mil) Dielectric Strength, >94 °C (ASTM D93) Flash Point, 4 - 8 hr At 25 °C/77 °F Full Cure Time, 15 - 25 min At 25 °C/77 °F (250 g) Gel Time, 82 Shore D (ASTM D2240) Hardness, 100 (Parts By Weight And Volume) Resin, 12.5 (Parts By Weight) 19.5 (Parts By Volume) Hardener Mixing Ratio, 50000 - 100000 CP At 25 °C/77 °F Viscosity, 400 - 800 CP At 25 °C/77 °F Viscosity - Part-B. - Sterling® E 400/C 12 hardener is a two-component, room temperature curing, 100%- solids resin system.
Product Options
Showing 2 out of 2 options
 | Container Size: 7.5 lb | EIS Part #: PDGC12G | $ / US pound | |
| Container Size: 1.5 lb | EIS Part #: C12Q | $ / US pound |
- Attributes
- Features
- Applications
- Documents
Attributes
General Information
Item NameEpoxy Hardener
Trade NameSterling®
SeriesSterling® C 12
General Features
Net Weight8.5 - 8.7 lb/gal
Shelf Life12 Months
TypeTwo-Component
Design & Construction
Base TypeEpoxy
Cure TypeRoom Temperature
FormLiquid
Performance Details
Full Cure Time4 - 8 hr at 25 °C/77 °F
Gel Time15 min
Technical Details
Flash Point94 °C
Chemical Properties
Viscosity50000 cP
Viscosity - Part-B400 cP
Mixing Ratio12.5 (Parts By Weight) 19.5 (Parts By Volume)
Electrical Properties
Dielectric Strength300 V/Mil
Physical Properties
Container TypeCan
Hardness82 Shore D (ASTM D2240)
Features
- High bond strength
- Chemical and moisture resistant
- Fast cure in thin films
- Highly filled for improved heat dissipation
- Thixotropic for application on vertical surfaces
- Suitable for class 180 service
- Brush on, knife / spatula application methods
- 3000 psi at 25 °C / 77 °F, 600 psi at 193 °C / 380 °F lap shear strength (aluminum to aluminum)
- 2.8% (28 days at 180 °C) weight loss
- 0.5% (28 days at 25 °C / 77 °F) water absorption
- 0.01 at 1 kHz - 25 °C / 77 °F (ASTM D150) dielectric constant
- 4.6 at 1 kHz - 25 °C / 77 °F (ASTM D150)
- Secondary insulation
- Gel Time: 15 - 25 min
- Viscosity: 50000 - 100000 cP
- Viscosity - Part-B: 400 - 800 cP
Applications
- Protective Overcoat for Motor Windings, Bus Bars, Switch Gear, Etc.., General-Purpose Adhesive