Elantas PDG Elan-Tron® C 301 Two-Component Epoxy Brush-On Compound Hardener
- MFR #Elan-Tron® C 301
- EIS #PH21-Elan-Tron C 301
$25.19 - $58.05
Refine your product below or compare all choices in the
Min QTY1QTY Increment1more infoPack--
| Stock Status | |||
|---|---|---|---|
 | 23 g | $ / each |
Elantas PDG Elan-Tron® C 301 Two-Component Epoxy Brush-On Compound Hardener, Room Temperature Cure Type, 0.94 g/cm3 (77 °F (25 °C)) Density, >94 °C (ASTM D93) Flash Point, 2 hr At 80 °C/175 °F Full Cure Time, 100 (Parts By Weight) Resin, 6.5 (Parts By Weight) Hardener Mixing Ratio, 8500 psi At 25 °C/77 °F Tensile Strength, 60000 - 90000 CP At 25 °C/77 °F (20 rpm) Viscosity - Part-A, 5 - 10 CP At 25 °C/77 °F Viscosity - Part-B. - ELAN-Tron® C 301 hardener is a 100%-solids, two-component epoxy system. It is available as individual components or in 100-gram pre-measured kits (ELAN-Tron® E 211 blue epoxy kit).
Features
- Electrically insulating, abrasion-resistant
- Brushable for high build-up with a single application
- Excellent resistance to chemicals and moisture
- Room temperature cure
- Brush, spatula application methods
- Store below 25 °C / 77 °F in a dry controlled environment out of direct sunlight
- 30 min at 25 °C / 77 °F Pot life
- 3200 PSI at 25 °C / 77 °F lap shear strength
- 0.1% (24 hours at 25 °C / 77 °F) water absorption
- Viscosity - Part-A: 60000 - 90000 cP
- Viscosity - Part-B: 5 - 10 cP
Applications
- Protective Coating, Sealant and Adhesive for Metals, Plastics, Ceramics and Other Surfaces, Casting or Potting of Small Electrical Components, Preparation of Epoxy-Glass Laminates
General Information
| Item Name | Epoxy Brush-On Compound Hardener |
| Trade Name | Elan-Tron® |
| Series | Elan-Tron® C 301 |
General Features
| Net Weight | 7.7 - 8.0 lb/gal |
| Shelf Life | 12 Months |
| Type | Two-Component |
Design & Construction
| Base Type | Epoxy |
| Cure Type | Room Temperature |
| Form | Liquid |
Performance Details
| Full Cure Time | 2 hr at 80 °C/175 °F |
| Tensile Strength | 8500 psi |
Technical Details
| Flash Point | 94 °C |
Chemical Properties
| Mixing Ratio | 100 (Parts By Weight) Resin, 6.5 (Parts By Weight) Hardener |
| Viscosity - Part-A | 60000 cP |
| Viscosity - Part-B | 5 cP |