Leeson PE350 DC Gearmotor, 1/4 HP, 42 rpm, 12VDC Armature, 32 Frame, TENV, MFR ID M1125274
- MFR #RE-Washguard-PE350-M11
- EIS #MOTM1125274
- Series #RE-Washguard-PE350-M11
$1,374.78 / Piece
Available to Order
Refine your product below or compare all choices in the
Min QTY1QTY Increment1
more info
Products You May Also Like
| Stock Status | |||||
|---|---|---|---|---|---|
 | 0.125 HP | 12 VDC | 14 rpm | $ / Piece | |
| 0.25 HP | 12 VDC | 42 rpm | $ / Piece | |
| 0.25 HP | 90 VDC | 42 rpm | $ / Piece |
Leeson P350 DC Gearmotor, Ball Bearing, Continuous Duty, Totally Enclosed Non-Ventilated Enclosure, Class F3 Insulation, Service Factor: 1, Horizontal Shaft, 40 deg C Ambient.
Leeson Washguard® P350 Parallel Shaft Totally Enclosed Non-Ventilated (TENV) DC Gearmotor
Applications
- For Wet, High Humidity Applications
Features
- Gearbox output shafts are coated with mirolon 3300 fortified teflon for superior corrosion resistance
- Frame, end shields, armature and interior components protected by enamel and polyester compound for resistance to moisture, acids, alkalies and oil
- Precision machined in-line steel gears
- First stage steel helical gear followed by spur-type gears
- Lubrication is permanent semi-fluid grease, reducing possibility of leakage
- Output shafts have needle bearings for high load capacities
- Gearbox shafts are hardened steel
- Cast conduit box with threaded conduit holes and Nitrile gaskets keep water out
- Conduit box cover is made from 304 stainless steel
- For any condensation that may accumulate inside the motor, a one-way stainless steel vapor vent is provided
- All hardware is stainless steel
- Painted with white epoxy for superior corrosion resistance and protection
- Machined fits between the end bells and motor frame are sealed with gaskets
- Thru-bolt heads and nuts sealed with fiber washers
- O-rings under each threaded brush cover, performance matched for continuous duty service, designed for battery power or can be used with a low voltage controller with form factor up to 1.05
- Full load ampere: 20A at 12VDC
- Temperature Rating: 40 °C Ambient
General Information
| Item Name | DC Gear Motor |
| Trade Name | Leeson |
| Series | RE-Washguard-PE350-M11 |
General Features
| Type | DN, Parallel Shaft, Low Voltage |
| Standards | UL Listed, CSA Certified, CE Certified, USDA Approved, IP55 |
| Net Weight | 17 lb |
Design & Construction
| Bearing Type | Ball |
| Duty | Continuous |
| Enclosure Type | Totally Enclosed Non-Ventilated |
| Gearhead Type | P353-32 |
| Gear Material | Steel |
| Insulation Type | Class F3 |
| Rotation | Reconnect |
| Shaft Position | Horizontal |
Performance Details
| Speed Rating | 42 rpm |
| Over-Hung Load | 327 lb |
| Torque Rating | 325 lb-Inch |
Electrical Properties
| Armature Voltage | 12 VDC |
| Full Load Ampere | 20 A |
| HP Rating | 0.25 HP |
| Service Factor | 1 |
Physical Properties
| Dimensions | 13.84 Inch L x 6 Inch W x 6.7 Inch H |
| Frame Size | 32 |
| Shaft Length | 2 |
| Shaft Diameter | 0.75 Inch |
Environmental Condition
| Temperature Rating | 40 °C |
Documents
No Documents Found