Leeson Washguard® Right Angle Shaft Totally Enclosed Non-Ventilated (TENV) DC Gearmotor, MFR ID RE-Washguard-13-M11
- MFR #RE-Washguard-13-M11
- EIS #PH23-RE-Washguard-13-M11
- Series #RE-Washguard-13-M11
$540.64 - $1,516.50
Refine your product below or compare all choices in the
Min QTY1QTY Increment1
more info
Pack--Products You May Also Like
| Stock Status | |||||
|---|---|---|---|---|---|
 | 0.25 HP | 12 VDC | 125 rpm | $ / Piece | |
| 0.25 HP | 12 VDC | 62 rpm | $ / Piece | |
| 0.25 HP | 90 VDC | 250 rpm | $ / Piece | |
| 0.125 HP | 90 VDC | 42 rpm | $ / Piece | |
| 0.125 HP | 90 VDC | 250 rpm | $ / Piece |
Leeson Washguard® Right Angle Shaft Totally Enclosed Non-Ventilated (TENV) DC Gearmotor - Leeson DC Gearmotor, Ball Bearing, Continuous Duty, Totally Enclosed Non-Ventilated Enclosure, Class F3 Insulation, Service Factor: 1, Horizontal Shaft, 40 °C Ambient.
Features
- 303 stainless steel gearbox output shaft
- Frame, end shields, armature and interior components protected by enamel and polyester compounds for resistance to moisture, acids, alkalies and oil
- Cast conduit box with threaded conduit holes and Nitrile gaskets keep water out
- Conduit box cover is made from 304 stainless steel
- For any condensation that may accumulate inside the motor, a one-way stainless steel vapor vent is provided
- All hardware is stainless steel
- Painted with white epoxy for superior corrosion resistance and protection
- Machined fits between the end bells and motor frame are sealed with gaskets
- Thru-bolt heads and nuts sealed with fiber washers
- O-rings under each threaded brush cover
- Worm-type right-angle gearing features hardened, steel worm with bronze worm wheel for long life and quiet operation
- Precision machined aluminum gear housing
- Lubrication is permanent with an oil bath, gearbox has all ball bearings
- Output shaft is field interchangeable from left hand to right hand style by reassembly
- Temperature Rating: 40 °C Ambient
General Information
| Item Name | DC Gear Motor |
| Trade Name | Washguard® |
| Series | RE-Washguard-13-M11 |
General Features
| Standards | UL Listed, CSA Certified, CE Certified, IP55 |
Design & Construction
| Bearing Type | Ball |
| Duty | Continuous |
| Enclosure Type | Totally Enclosed Non-Ventilated |
| Gear Material | Aluminum |
| Insulation Type | Class F3 |
| Shaft Position | Horizontal |
Performance Details
| Over-Hung Load | 235 lb |
Electrical Properties
| Service Factor | 1 |
Physical Properties
| Shaft Diameter | 0.593 Inch |
| Shaft Length | 1.8 Inch |
Environmental Condition
| Temperature Rating | 40 °C |
Documents
No Documents Found