Leeson P300 DC Gearmotor, 1/8 HP, 94 rpm, 90VDC Armature, 31 Frame, TENV, MFR ID M1125264
- MFR #M1125264.00
- EIS #MOTM1125264
$1,310.41 / Piece
In Stock | Ready to Ship
Min QTY1QTY Increment1
more info
Products You May Also Like
Leeson P300 DC Gearmotor, Ball Bearing, Continuous Duty, Totally Enclosed Non-Ventilated Enclosure, Class F3 Insulation, Service Factor: 1, Horizontal Shaft, 40 deg C Ambient.
Leeson Washguard® P300 Parallel Shaft Totally Enclosed Non-Ventilated (TENV) DC Gearmotor
Features
- Gearbox output shafts are coated with mirolon 3300 fortified teflon for superior corrosion resistance
- Frame, end shields, armature and interior components protected by enamel and polyester compound for resistance to moisture, acids, alkalies and oil
- Precision machined in-line steel gears
- First stage steel helical gear followed by spur-type gears
- Lubrication is permanent semi-fluid grease, reducing possibility of leakage
- Output shafts have needle bearings for high load capacities
- Gearbox shafts are hardened steel
- Cast conduit box with threaded conduit holes and Nitrile gaskets keep water out
- Conduit box cover is made from 304 stainless steel
- For any condensation that may accumulate inside the motor, a one-way stainless steel vapor vent is provided
- All hardware is stainless steel
- Painted with white epoxy for superior corrosion resistance and protection
- Machined fits between the end bells and motor frame are sealed with gaskets
- Thru-bolt heads and nuts sealed with fiber washers
- Temperature Rating: 40 °C Ambient
- O-rings under each threaded brush cover, performance matched for continuous duty service over 60:1 speed range, constant torque throughout the range when powered by a full-wave unfiltered SCR-type adjustable speed control having a typical form factor of 1.3 to 1.4
- Full load ampere: 1.6A at 90VDC
Applications
- For Wet, High Humidity Applications
General Information
| Item Name | DC Gear Motor |
| Trade Name | Leeson |
General Features
| Type | DN, Parallel Shaft, SCR Rated |
| Standards | UL Listed, CSA Certified, CE Certified, IP55 |
| Net Weight | 12 lb |
Design & Construction
| Bearing Type | Ball |
| Duty | Continuous |
| Enclosure Type | Totally Enclosed Non-Ventilated |
| Gearhead Type | P302-31 |
| Gear Material | Steel |
| Insulation Type | Class F3 |
| Rotation | Reconnect |
| Shaft Position | Horizontal |
Performance Details
| Speed Rating | 94 rpm |
| Over-Hung Load | 236 lb |
| Torque Rating | 77 lb-Inch |
Electrical Properties
| Armature Voltage | 90 VDC |
| Full Load Ampere | 1.6 A |
| HP Rating | 0.125 HP |
| Service Factor | 1 |
Physical Properties
| Dimensions | 11.94 Inch L x 4.96 Inch W x 6.35 Inch H |
| Shaft Length | 1.5 |
Documents
No Documents Found