$120.13 - $34,896.07
Refine your product below or compare all choices in the
Min QTY1QTY Increment1
more info
Pack--Why Buy From EIS?
- Authorized Distributor
- Fast Shipping
- Technical Support Available
Products You May Also Like
Products You May Also Like
| Stock Status | ||||
|---|---|---|---|---|
| 0.4375 Inch | 100 ft | $ / Foot more info | ||
| 0.375 Inch | 150 ft | $ / Foot more info | ||
| 0.5 Inch | 100 ft | $ / Foot more info | ||
| 0 AWG | 150 ft | $ / Foot more info | ||
| 1 AWG | 250 ft | $ / Foot more info | ||
| 2 AWG | 250 ft | $ / Foot more info |
Varglas VPI acrylic sleeving is a grade A, acrylic coated fiberglass sleeving that has been overbraided with a secondary fiberglass braid which, in addition to providing increased physical protection, affords motor manufacturers, as well as rewinders, employing vacuum pressure impregnation (VPI) with both interior and exterior surfaces that are highly suitable for the absorption and retention of the low-viscosity, solvent-type and solventless resins utilized during the impregnation and drain cycles. - Varglas VPI acrylic sleeving is a grade A, acrylic coated fiberglass sleeving that has been overbraided with a secondary fiberglass braid which, in addition to providing increased physical protection, affords motor manufacturers, as well as rewinders, employing vacuum pressure impregnation.
Features
- Because of its acrylic lineage, Varglas VPI acrylic sleeving is resistant to most acids, organic solvents, oils and water and exhibits fair resistance to alkalies
- It is compatible with modified polyester, acrylic, epoxy, phenolic and formvar wire enamels and is designed to perform for long periods in a 155 °C range without loss of any electrical or physical properties
- It provides a minimum average shorttime dielectric strength of 7000 volts before vacuum impregnation
- Dielectric Grade: A-1
- Temperature Rating: -25 to 155 °C
Applications
- Primarily to Insulate the Coil and Phase Leads in Random-Wound and Formed-Coil Motors Which are to be Resin-Impregnated, After Assembly, Utilizing Vacuum Pressure Impregnation Processes
- Used Whenever Additional Abrasion Resistance and Insulation System Compatibility are Required in Applications Subjected to Continuous Operating Temperatures of 155 °C
General Information
| Item Name | Acrylic Coated Sleeving |
| Trade Name | Varglas VPI |
| Series | Varglas VPI-A-1 |
General Features
| Type | Double Wall |
Design & Construction
| Braid Type | Fiberglass, Over-Braided |
| Color | Natural |
| Grade | A-1 |
| Insulation Material | Acrylic |
| Insulation Type | Class F |
| NEMA Specification | NEMA TF-1 |
Electrical Properties
| Dielectric Strength | 7000 V |
Documents
No Documents Found