MFR #:Nu-Sleeve™ AG-155-A
EIS #:PH21-Nu-Sleeve AG-155-A
Series #:Nu-Sleeve™ AG-155-A
MFR #:Nu-Sleeve™ AG-155-A
EIS #:PH21-Nu-Sleeve AG-155-A
Series #:Nu-Sleeve™ AG-155-A
Nu-Sleeve AG-155 has excellent electrical, chemical and oil resistance properties, excellent heat stability and flexibility for ease of push-up and recovery. It exhibits excellent resistance to oils, acids and alkalis and solvents. Resistance to fungus and corona is good. Nu-Sleeve AG-155 is available in NEMA Grades A, B, C-1, C-2 and C-3. - Nu-Sleeve AG-155 is a coated fiberglass sleeving made by applying a proprietary blend of acrylic polymers to a closely woven electrical grade fiberglass substrate. For Grade C-3, dielectric value is dependent on static conditions with no specific voltage value guaranteed.
$4.19
- $1,107.05
Select from the options below
Nu-Sleeve AG-155 has excellent electrical, chemical and oil resistance properties, excellent heat stability and flexibility for ease of push-up and recovery. It exhibits excellent resistance to oils, acids and alkalis and solvents. Resistance to fungus and corona is good. Nu-Sleeve AG-155 is available in NEMA Grades A, B, C-1, C-2 and C-3. - Nu-Sleeve AG-155 is a coated fiberglass sleeving made by applying a proprietary blend of acrylic polymers to a closely woven electrical grade fiberglass substrate. For Grade C-3, dielectric value is dependent on static conditions with no specific voltage value guaranteed.
Product Options
Showing 8 out of 106 options
Length: 12 Inch | Gauge: 17 AWG | Color: Natural | EIS Part #: JENSLV-17 | $ / Piece | ||
Length: 6 Inch | Gauge: 16 AWG | Color: Natural | EIS Part #: JENSLV-16 | $ / Piece | ||
Length: 2 Inch | Gauge: 13 AWG | Color: Natural | EIS Part #: JENSLV-13 | $ / Piece | ||
Length: 2 Inch | Gauge: 12 AWG | Color: Natural | EIS Part #: JENSLV-12 | $ / Piece | ||
Length: 8 Inch | Gauge: 11 AWG | Color: Natural | EIS Part #: JENSLV-11 | $ / Piece | ||
Length: 6 Inch | Gauge: 6 AWG | Color: Natural | EIS Part #: JENSLV-06 | $ / Piece | ||
Length: 5 Inch | Gauge: 4 AWG | Color: Natural | EIS Part #: JENSLV-04 | $ / Piece | ||
Length: 6 Inch | Gauge: 2 AWG | Color: Natural | EIS Part #: JENSLV-02 | $ / Piece |
- Attributes
- Features
- Applications
- Documents
Attributes
General Information
Item NameAcrylic Coated Sleeving
Trade NameNu-Sleeve™ AG-155
SeriesNu-Sleeve™ AG-155-A
Design & Construction
Braid TypeFiberglass
GradeA
Insulation MaterialAcrylic
Insulation TypeClass F
NEMA SpecificationNEMA TF-1
Electrical Properties
Dielectric Strength7000 V
Breakdown Voltage5000 V
Physical Properties
Elongation150%
Features
- Nu-Sleeve AG-155 has excellent electrical, chemical and oil resistance properties, excellent heat stability and flexibility for ease of push-up and recovery
- It exhibits excellent heat stability and flexibility for ease of push-up and recovery
- Nu-Sleeve AG-155 is then well suited in harsh environments for the automotive industry
- Excellent cut through resistance
- 2.5 (1000 Hz) dielectric constant
- 0.07 (1000 Hz) dissipation factor
- Fungus resistance very good - none at 10x
- Abrasion resistance (SAE ARP 1 536) 2500 cycles
- Dielectric Strength: Dry - 7000 V, Wet - >80% Of Dry Value
- Volume Resistivity: 1 Ohm-cm x 10^10 Ohm-cm
- Dielectric Grade: A
- Breakdown Voltage: 5000 - 7000V
- Temperature Rating: -40 to 155 °C
Applications
- For Coil and Winding Industry (Coils, Motors, Generators, Transformers)
- Lighting Fixtures, Transportation (Mass Transit, Rail Cars, Locomotives)
- Industrial Equipment (Tow Motors, Overhead Cranes, Aerial Platforms)
- Technology, Media and Telecommunications, Appliance
- Wind Turbines and Solar Panels, and in Many Other Industrial Fields