MFR #:119831
EIS #:EPO8112K
Series #:E-8112
MFR #:119831
EIS #:EPO8112K
Series #:E-8112
Out of Stock
Min Qty:1
|Qty Increment:1
more info
Epoxylite E 8112 hi temp epoxy products are filled and sold by weight and may contain less than the nominal volume of the container. Maintains excellent electrical and physical properties to at least 260 deg C / 500 deg F.
Epoxylite E 8112 hi-temp epoxy is a heat-cured, two-component system consisting of a viscous liquid resin and a finely divided powder hardener. It is provided in pre-measured kits. Epoxylite resins are used in overcoating and impregnation of armatures, stators and coils in motors and generators.
$344.99 / Kit
Min Qty:1
|Qty Increment:1
more info
Epoxylite E 8112 hi temp epoxy products are filled and sold by weight and may contain less than the nominal volume of the container. Maintains excellent electrical and physical properties to at least 260 deg C / 500 deg F.
Epoxylite E 8112 hi-temp epoxy is a heat-cured, two-component system consisting of a viscous liquid resin and a finely divided powder hardener. It is provided in pre-measured kits. Epoxylite resins are used in overcoating and impregnation of armatures, stators and coils in motors and generators.
Product Options
Showing 1 out of 1 options
Container Size: 0.219 lb | EIS Part #: EPO8112K | $ / Kit |
- Attributes
- Applications
- Features
Attributes
General Information
Item NamePotting Compound
Trade NameElantas
SeriesE-8112
General Features
Shelf Life6 Months
StandardsOSHA Approved, 29 CFR 1910.94 Certified
Storage TemperatureBelow 25 deg C
TypeTwo-Part, High Temperature
Design & Construction
Cure TypeRoom Temperature
Form - Part-ALiquid
Form - Part-BPowder
Performance Details
Full Cure TimeSee TDS
Chemical Properties
CompositionEpoxy Anhydride
Viscosity22 sq-mm/sec
Electrical Properties
Dielectric Strength560V/Mil
Physical Properties
Container Size0.219 lb
Container TypeKit
Hardness90 Shore D
Supporting Information
Application MethodBench Casting, Vacuum Casting
Applications
- For Potting and Sealing of Electrical and Electronic Components Requiring Resistance to High Temperatures
Features
- Withstands temperatures in excess of 316 deg C / 600 deg F for short periods
- Excellent adhesion to metals, ceramics and most plastics
- Resistant to acids, alkalis and solvents