North American Electric 380V F1 Assembly - Foot Totally Enclosed Fan-Cooled (TEFC) Heavy Duty Cast Iron General Purpose Motor, MFR ID NA-380-F1AF-TEFC-HDCI-GPM
- MFR #NA-380-F1AF-TEFC-HDCI-GPM
- EIS #PH23-NA-380-F1AF-TEFC-HDCI-GPM
$10,276.20 - $58,772.51
Refine your product below or compare all choices in the
Min QTY1QTY Increment1more infoPack--
| Stock Status | |||||
|---|---|---|---|---|---|
 | 401.9 A | 300 HP | 586/7UZ | $ / Piece | |
| 472.6 A | 350 HP | 586/7UZ | $ / Piece | |
| 543 A | 400 HP | 586/7UZ | $ / Piece | |
| 526.5 A | 400 HP | 586/7UZ | $ / Piece | |
| 390.2 A | 300 HP | 586/7UZ | $ / Piece | |
| 810.6 A | 600 HP | 586/7UZ | $ / Piece |
North American Electric high torque general purpose motor is suitable for wye-delta start on 213T frame and above. Single voltage ratings suitable for part wind start at 460V are noted. Suitable for 575V at 1.0 Service Factor. Vacuum pressure impregnation for all windings. Greasable bearings. Mechanical “V” seal on drive end. Class F insulation system, class B rise at full load. - Corrosion resistant paint. Stainless steel nameplate and zinc plated hardware. Feet are dual drilled on most frames for mounting flexibility. Cast iron frame construction including the conduit box. Condensation drains with plastic plugs. IP55 Protection - terminal box is sealed for IP66 protection, NEMA Premium® efficient
Features
- Inverter Duty (20:1 variable torque, 10:1 constant torque)
- 1.15 Service Factor at 60 hertz, 1.0 Service Factor at 50 hertz
- Corrosion resistant paint
- Stainless steel nameplate and zinc plated hardware
- Feet are dual drilled on most frames for mounting flexibility
- Cast iron frame construction including the conduit box
- Condensation drains with plastic plugs
- IP55 Protection - Terminal box is sealed for IP66 protection, NEMA Premium® Efficient
- Voltage rating: 460V at 60 Hz, 380V at 50 Hz
- Frequency Rating: 50/60 Hz
- Service factor: 1.15 at 60 Hz, 1 at 50 Hz
Applications
- General purpose use on pumps, fans, blowers, compressors, conveyors, material handling and other industrial machinery installed in damp dusty or dirty environments. Also good for use with industrial equipment requiring extremely high starting torques and breakdown torques
General Information
| Item Name | General Purpose Motor |
| Series | NA-380-F1AF-TEFC-HDCI-GPM |
General Features
| Type | High Torque |
| Standards | CSA + CE + US Certification, ISO 9001 Certification, Meets or exceeds NEMA Premium® Efficiency Requirements defined by MG-1, Table 12-12 , Class I, Div II Groups ABCD, T2B |
Design & Construction
| Construction | Heavy Duty Cast Iron |
| Duty | Continuous |
| Enclosure Type | Totally Enclosed Fan-Cooled |
| Insulation Type | Class F |
| Mounting Type | F1 Assembly - Foot |
| Rotation | Reversible |
| Seal Type | V |
Electrical Properties
| Frequency Rating | 50 Hz |
| Phase | 3-Phase |
| Service Factor | 1.0 |
| Voltage Rating | 380 V |
Physical Properties
| Dimensions | 71.65 Inch L x 47.24 Inch H |
| Shaft Diameter | 3.875 Inch |
| Shaft Length | 11.63 Inch |
Environmental Condition
| Temperature Rating | 40 °C |
Documents
No Documents Found