text.skipToContent text.skipToNavigation

Devcon 11490 Wear Guard™ Non-Sag Epoxy Adhesive, 30 lb Kit, White

ID: DEV11490 Mfr ID: 11490
Manufactured by: Devcon
Devcon Wear Guard 14601 ceramic epoxy comes in white and is packaged 30 lb per inner. Can be used with fiberglass, metal. Designed to have chemical-resistant properties. This product requires a specific mix ratio for proper use. Requires a 2:1 mix ratio.

USD $469.42 / KT

In Stock

 Future Availability 

This item may be sold in units of 1.

  • Brand name :  Devcon
  • Trade Name :  Wear Guard™
  • Item Name :  Epoxy Adhesive
  • Short Desc :  EPOXY,WEAR GUARD,HI LOAD 30 LB KIT
  • UPC :  00078143114908
  • UNSPSC :  31201607

Cure time should always be considered on any application or project. Once applied, this product requires a 16 hr cure time before it is fully set and provides maximum strength.

Design & Construction
Form - Part-A Liquid 
Form - Part-B Paste 
Color - Part-B White 
Performance Details
Full Cure Time 16 hr 
Open Time 30 min 
Shear Strength 1474 psi 
Tensile Strength 4210 psi 
Environmental Condition
Temperature Rating 140 deg F (Dry), 300 deg F (Wet) 
Chemical Properties
Composition - Part-A Epoxy Resin 
Composition - Part-B Epoxy Curing Agent 
Specific Gravity - Part-A 1.1 
Specific Gravity - Part-B 2.25 
Physical Properties
Container Size 30 lb 
Container Type Kit 
Hardness 87 Shore D 
Odor/Scent - Part-A Slight 
Odor/Scent - Part-B Mild Ammonia 

Devcon 11490 Wear Guard™ Non-Sag Epoxy Adhesive, 30 lb Kit, White Technical Data Sheet 

Devcon 11490 Wear Guard™ Non-Sag Epoxy Adhesive, 30 lb Kit, White Safety Data Sheet (SDS) 

Devcon 11490 Wear Guard™ Non-Sag Epoxy Adhesive, 30 lb Kit, White Material Safety Data Sheet (MSDS) 

Features :

  • Handles particulate greater than 1/8 Inch
  • Operational temperature resistance to 300 deg F
  • Exceptional resistance to a wide range of acids, bases, saturated salt solutions, oils and many other chemicals
  • Trowels onto overhead or vertical surfaces without sagging
  • Ideal for repairing scrubbers, ash handling systems, pipe elbows, screens and chutes
  • Specific gravity of part A 1.1 - 1.3

Applications :

  • For Repair Scrubbers, Ash Handling Systems, Pipe Elbows, Screens, Chutes, Recontour Chippers, Bins, Hoppers, Bunkers, Separators, Diester Tables, Protect Exhausters, Chutes, Launderers, Housing Fans, Crushers and Breakers