text.skipToContent text.skipToNavigation

Insulation Paper and Film

Insulation Papers and Films are paper materials used for electrical insulation in applications such as wedges, coils, motors, and more. Insulation Papers and Films offer thermal stability and conductivity, low moisture absorption, high varnish absorption, while remaining cost-effective. These papers and films are available in a variety of insulation types. Configuration types of papers and films include:

  • Sheet
  • Roll
  • Slit Roll

Wherever insulation is necessary, EIS has you covered with a wide variety of Insulation Papers and Films that feature a variety of different capabilities. EIS supplies Insulation Papers and Films from many different top suppliers.

  • 1(current)
  • 2
  • 3
Displaying 1 - 21 of 167 products found
  • Elantas PDG ELAN-Film® HT-180 Insulation Film Sheet

    Multiple item options available
    Mfr ID: ELAN-Film® HT-180
    ELAN-Film® HT-180 is a PET film coated on each side with a 0.5 mil layer of ELANTAS PDG, Inc.

     

  • Fiber-Tek DMD-100 White Triplex Flexible Laminate Sheet, 0.02" x 24" x 36"

    ID: DMD510501
    Mfr ID: DMD510501
    Mfr: Fibertek
    The Fibertek ''Res-I-Lam'' family of DMD Flexible Laminates is both new and revolutionary in today's marketplace. All other producers of DMD Laminates use a solvent based adhesive system which falls woefully short of the quality features of the Fibertek DMD products. The Fibertek superiority is a direct result of our proprietary solvent-free adhesive system, developed and employed exclusively by Fibertek.

    In Stock

  • FLEXcon Industrial DMD 70 White Triplex Flexible Laminate Roll

    Multiple item options available
    Mfr ID: Dacron® Mylar® Dacron®-70-ROL-WHT
    DMD is made of two layers of electrical polyester non-woven and one layer of electrical grade polyester film, laminated with a high temperature adhesive system, with good dielectric properties, high heat resistance and mechanical strength, suitable for small and medium size electric motors as slot, phase, turn-to-turn, liner insulation in F-class Motor.

    In Stock

  • Von Roll Mica Segment Plate Sheet

    Multiple item options available
    Mfr ID: MICA-SEG PLT-SHEET
    Von Roll Mica Segment Plate, Class 155 deg C consists of mica splittings bonded with an epoxy resin to form a flexible sheet which can be readily applied to unusual configurations without the application of heat.

    In Stock

  • Mylar® Clear Hi Shrink Tape Roll, 2 Mil x 1-1/2" x 100 yd

    ID: MYLAR.002X1.5
    Mfr ID: MYLAR.002X1.5
    Mylar® Hi Shrink Tape, Roll Configuration, Polyester release coat finish.

     

  • DuPont Nomex® 410 1-Ply Calendared Insulation Paper, 2 Mil x 3/4"

    ID: NMXCOP002
    Mfr ID: NMXCOP002
    DuPont™ Nomex® paper Type 410 is an insulation paper which offers high inherent dielectric strength, mechanical toughness, flexibility and resilience. Nomex® paper Type 410 is the original form of Nomex® paper, and is widely used in a majority of electrical equipment applications. Available in 11 thicknesses (0.05 to 0.76 mm) (2 to 30 Mil) Nomex® paper Type 410 is used in almost every known electrical sheet insulation application.

     

  • DuPont Nomex® 411 Paper Type Sheet

    Multiple item options available
    Mfr ID: Nomex® 411-SHT
    Nomex® Type 411 is the uncalendered precursor of Nomex® Type 410. It is available in five thicknesses (0.13 to 0.58 mm) (5 to 23 mil), with a density of 0.3 and correspondingly lower electrical and mechanical properties.

    In Stock

  • Kraft Paper Kraft Sheet, 10 Mil x 24" x 36"

    ID: KRAFT1001
    Mfr ID: KRAFT1001
    Kraft Paper Kraft Sheet, Sheet Configuration, Transformer oils readily absorb into kraft paper and thereby double the kraft paper's dielectric constant.

    In Stock

  • Fiber-Tek DMD 180 White Triplex Flexible Laminate Sheet

    Multiple item options available
    Mfr ID: Dacron® Mylar® Dacron®-180-FLX LAM-SHT
    Mfr: Fibertek
    he Fibertek ''Res-I-Lam'' family of DMD Flexible Laminates is both new and revolutionary in today's marketplace. All other producers of DMD Laminates use a solvent based adhesive system which falls woefully short of the quality features of the Fibertek DMD products. The Fibertek superiority is a direct result of our proprietary solvent-free adhesive system, developed and employed exclusively by Fibertek.

    In Stock

  • DuPont Nomex® 410 Paper Type Sheet

    Multiple item options available
    Mfr ID: Nomex 410
    DuPont™ Nomex® paper Type 410 is an insulation paper which offers high inherent dielectric strength, mechanical toughness, flexibility and resilience. Nomex® paper Type 410 is the original form of Nomex® paper, and is widely used in a majority of electrical equipment applications. Available in 11 thicknesses (0.05 to 0.76 mm) (2 to 30 Mil) Nomex® paper Type 410 is used in almost every known electrical sheet insulation application.

    In Stock

  • Von Roll DMD Triplex Cuffed Coil Polyester Mat

    Multiple item options available
    Mfr ID: Dacron® Mylar® Dacron®-COIL
    Von Roll DMD Triplex Cuffed Coil Polyester Mat, Class F Insulation.

    In Stock

  • Von Roll Acuflex® Mylar® 76850 Heat Shrink PET Flexible Tape Roll

    Multiple item options available
    Mfr ID: 76850
    Von Roll Acuflex® Mylar® 76850 Heat Shrink PET Flexible Tape, they are slit post-orientation to assure uniform, unidirectional shrinkage. Roll configuration.

     

  • Von Roll Acuflex® Mylar® 76856 Heat Shrink PET Flexible Tape Roll, 2 Mil x 1" x 120 yd

    ID: VRI76856X1
    Mfr ID: VRI76856X1
    Von Roll Acuflex® Mylar® 76850 Heat Shrink PET Flexible Tape, they are slit post-orientation to assure uniform, unidirectional shrinkage. Roll configuration.

     

  • Lectromat Black Conductive JCT Tab Tape Roll

    ID: A50A406A0H0150
    Mfr ID: A50A406A0H0150
    Mfr: Lectromat
    Lectromat Conductive JCT Tab Tape, Black, Roll Configuration.

     

  • Von Roll Acuflex® Mylar® 76851 Heat Shrink PET Flexible Tape Roll

    Multiple item options available
    Mfr ID: Acuflex® Mylar® 76851
    Von Roll Acuflex® Mylar® 76851 Heat Shrink PET Flexible Tape are specially processed to recover to near their original dimensions when heated. They are slit post-orientation to assure uniform, unidirectional shrinkage.

    In Stock

  • 3M CeQuin™ 3000 Inorganic Insulating Paper Roll

    Multiple item options available
    Mfr ID: CeQuin™ 3000
    3M™ CeQUIN™ 3000 paper is composed of approximately 74% inorganic content as compared to the 90% inorganic content of CeQUIN I paper. CeQUIN 3000 paper may be laminated with polyester film, or glass fabric to enhance initial dielectric strength or improve mechanical manageability. CeQUIN 3000 paper is available in continuous roll stock up to 36 inches wide, as slit tape, or sheets.

     

  • 3M CeQuin™ CGA Beige Inorganic Insulating Board

    Multiple item options available
    Mfr ID: CeQuin™ CGA
    3M™ CeQUINBORD CGA inorganic insulating board is a high inorganic content board composed primarily of glass fibers and microfibers, inorganic fillers, and less than 10 percent organic binders.

    In Stock

  • 3M CeQuin™ IF 2-Ply Inorganic Insulating Paper Roll

    Multiple item options available
    Mfr ID: CeQuin™ IF
    3M™ CeQUIN™ IFI Inorganic Insulating Paper Laminate is a two-ply composite of CeQUIN Inorganic Insulating Paper I bonded to polyester (PET) film for use in high-temperature electrical insulating applications. Qualified for use in electrical insulation systems up to Class 220® per UL 1446 and IEC Std. 60085. Applications include ground and layer insulation in dry-type transformers, as well as interwinding insulation in strip-wound coils, and wire-wrap for UL Recognized Class 250 deg C appliance wires. CeQUIN IF laminates are compatible with commonly used impregnating varnishes and resins, and are easily impregnated, further enhancing thermal conductivity and coil bonding characteristics.

    In Stock

  • 3M CeQuin™ II-Inorganic Insulating Paper Roll

    Multiple item options available
    Mfr ID: CeQuin™ II-RL
    3M™ CeQUIN™ II-Inorganic Insulating Papers are 3M's highest inorganic-content papers - comprised primarily of glass fibers and microfibers, inorganic filters, and less than 10% organic binders. CeQUIN I paper is a highly flexible paper available in continuous roll stock in thicknesses ranging from 5 Mil (0.13 mm) to 30 mil (0.76 mm). See Table 1 for Typical Product Properties of standard thicknesses of CeQUIN I, II paper. Other thicknesses are available on special order.

    In Stock

  • 3M CeQuin™ X-Inorganic Insulating Paper Roll, 10 Mil x 36" x 325 yd

    ID: CEQUINX010X325
    Mfr ID: CEQUINX010X325
    3M™ CeQUIN™ X-inorganic insulating paper is an inorganic-based paper for high-temperature electrical insulating applications.

     

  • 3M CeQuin™ I-Inorganic Insulating Paper Sheet

    Multiple item options available
    Mfr ID: CeQuin™ I-SHT
    3M™ CeQUIN™ I-Inorganic Insulating Papers are 3M's highest inorganic-content papers - comprised primarily of glass fibers and microfibers, inorganic filters, and less than 10% organic binders. CeQUIN I paper is a highly flexible paper available in continuous roll stock in thicknesses ranging from 5 Mil (0.13 mm) to 30 mil (0.76 mm). See Table 1 for Typical Product Properties of standard thicknesses of CeQUIN I, II paper. Other thicknesses are available on special order.

    In Stock

    • 1(current)
    • 2
    • 3