text.skipToContent text.skipToNavigation

Insulating Compounds

  • 1(current)
  • 2
Displaying 1 - 21 of 23 products found
  • Dynamis BAL-I-FS EPO Balance Compound

    Multiple item options available
    Mfr ID: BAL-I-FS
    Two-component epoxy dynamic balancing compound putty with a one hour pot life and 1-1/2 hour room temperature cure time.

    In Stock

  • Crouse Hinds SpeedSeal™ Chico® A A05 Sealing Compound, 5 lb

    ID: CHICOA055LB
    Mfr ID: CHICOA055LB
    Introduced more than 75 years ago, this brand now consists of the traditional Chico® A sealing compound, the Chico® Intrapak, Chico® X Fiber, and Chico® SpeedSeal™ Compound. Sealing compounds form a seal around and between each electrical conductor inside a sealing fitting.

    In Stock

  • Dynamis BAL-60 EPO Balance Compound, 16 lb

    ID: DYNBAL-6016LBKIT
    Mfr ID: DYNBAL-6016LBKIT
    Two-component epoxy dynamic balancing compound. The original epoxy putty with 2-1/2-3 hour pot life, 8-12 hour room temperature cure time and a specific gravity of 2.5. Widely used by both OEM's and repair shops. The mix ratio is 1:1, by volume. It has a 20 year proven field history. Resistant to both R-12 and R-134a. The use of EPO dynaweight can save as much as 60% of your balancing time.

     

  • Dynamis BAL-VI EPO Balance Compound

    Multiple item options available
    Mfr ID: BAL-VI
    Two-component epoxy dynamic balancing compound putty with a 3-3 1/2 hour pot life, and 8-12 hour room temperature cure time. Leaves no residual color on hands. Bulk packaged for high volume use.

     

  • Von Roll/John C Dolph Dolflex® CC-1015 Insulating Compound Resin, 1 gal

    ID: DOLCC1015G
    Mfr ID: DOLCC1015G
    DOLFLEX® CC-1015 insulating compound is a plastisol manufactured from selected vinyl resins and electrical grade plasticizers. Quick cure at relatively low temperature.

     

  • Elantas PDG RanVar™ BT-6447 Single-Component Air-Dry Insulating Enamel, 450 lb

    ID: RANBT6447DRUM
    Mfr ID: RANBT6447DRUM
    BT-6447 is a modified alkyd insulating resin formulated with a non-conductive pigment which makes it suitable for dual function as an insulating resin in Class F systems, as well as a finish coat.

     

  • Elantas PDG Ripley™ PL-4 Masking Putty, 9 lb/1 gal

    ID: PDGPL4G
    Mfr ID: PDGPL4G
    Elantas PDG Ripley™ PL-4 Masking Putty.

     

  • Crouse Hinds Chico® SpeedSeal™ Chico® X Ceramic Fiber, 1 lb

    ID: CHICO X7
    Mfr ID: CHICO X7
    Introduced more than 75 years ago, this brand now consists of the traditional Chico® A sealing compound, the Chico® Intrapak, Chico® X Fiber, and Chico® SpeedSeal™ Compound. Sealing compounds form a seal around and between each electrical conductor inside a sealing fitting.

     

  • Glyptal 1201E Insulating Enamel

    Multiple item options available
    Mfr ID: 1201E
    Mfr: Glyptal
    Originally produced as an insulating coating for the treatment of coils and armatures, Glyptal 1201's outstanding resistance to corrosion, moisture, heat, acid, oil and dust has seen it employed in numerous industries as a adhesive, primer, sealer and protective finish.

     

  • Dynamis BAL-XV-FS EPO Balance Compound, 2 lb

    ID: DYNBALXVFS2LB
    Mfr ID: DYNBALXVFS2LB
    Two-component epoxy dynamic balancing compound putty with a 15 minute pot life and 30 minute room temperature cure time. Used by field balancers and repair shops with a need for quick reassembly.

     

  • 3M Scotchfil™ Mastic Tape Electrical Insulation Putty,

    ID: 3MSCOTCHFIL
    Mfr ID: SCOTCHFIL
    3M™ Scotchfil™ Electrical Insulation Putty can be wrapped, stretched or molded around irregular shapes for quick, smooth insulation build-up. Use 3M™ Scotchfil™ Putty to insulate connections up to 600 volts and to round out high-voltage connections to gear, smooth bus bar irregularities, and make a moisture seal at ground wire exits in high-voltage splices.

     

  • Crouse Hinds SpeedSeal™ Chico® A A4 Sealing Compound

    Multiple item options available
    Mfr ID: SpeedSeal™ Chico® A
    Introduced more than 75 years ago, this brand now consists of the traditional Chico® A sealing compound, the Chico® Intrapak, Chico® X Fiber, and Chico® SpeedSeal™ Compound. Sealing compounds form a seal around and between each electrical conductor inside a sealing fitting.

     

  • Crouse Hinds SpeedSeal™ Chico® A A03 Sealing Compound, 1 lb

    ID: CHICOA031LB
    Mfr ID: CHICOA031LB
    Introduced more than 75 years ago, this brand now consists of the traditional Chico® A sealing compound, the Chico® Intrapak, Chico® X Fiber, and Chico® SpeedSeal™ Compound. Sealing compounds form a seal around and between each electrical conductor inside a sealing fitting.

     

  • Glyptal 1201B Insulating Enamel

    Multiple item options available
    Mfr ID: 1201B
    Mfr: Glyptal
    Originally produced as an insulating coating for the treatment of coils and armatures, Glyptal 1201's outstanding resistance to corrosion, moisture, heat, acid, oil and dust has seen it employed in numerous industries as a adhesive, primer, sealer and protective finish.

     

  • Glyptal 1201A Insulating Enamel, 12.75 oz

    ID: GLY1201A
    Mfr ID: GLY1201A
    Mfr: Glyptal
    Originally produced as an insulating coating for the treatment of coils and armatures, Glyptal 1201's outstanding resistance to corrosion, moisture, heat, acid, oil and dust has seen it employed in numerous industries as a adhesive, primer, sealer and protective finish.

     

  • Glyptal 1201G Insulating Enamel, 1 gal

    ID: GLY1201G
    Mfr ID: GLY1201G
    Mfr: Glyptal
    Originally produced as an insulating coating for the treatment of coils and armatures, Glyptal 1201's outstanding resistance to corrosion, moisture, heat, acid, oil and dust has seen it employed in numerous industries as a adhesive, primer, sealer and protective finish.

    In Stock

  • Glyptal 1201Q Insulating Enamel, 1 qt

    ID: GLY1201Q
    Mfr ID: GLY1201Q
    Mfr: Glyptal
    Originally produced as an insulating coating for the treatment of coils and armatures, Glyptal 1201's outstanding resistance to corrosion, moisture, heat, acid, oil and dust has seen it employed in numerous industries as a adhesive, primer, sealer and protective finish.

     

  • Glyptal 74004 Buff Catalyst Curing Insulating Epoxy, 1 gal

    ID: GLY74004G
    Mfr ID: GLY74004G
    Mfr: Glyptal
    Glyptal 74004 buff catalyst curing epoxy is an air-drying epoxy enamel designed to give maximum durability and a high degree of chemical resistance. Because of this durability and chemical resistance, this product is well-suited for use as a machinery enamel where resistance to oil, coolants, and other corrosive agents is essential.

     

  • Glyptal 74010 Insulating Epoxy Hardener, 1 gal

    ID: GLY74010G
    Mfr ID: GLY74010G
    Mfr: Glyptal
    Glyptal 74010 is an insulating coating epoxy hardener.

    In Stock

  • Dynamis EPO Balance Compound

    Multiple item options available
    Mfr ID: BAL-COM
    Two-component epoxy dynamic balancing compound. The original epoxy putty with 2-1/2-3 hour pot life, 8-12 hour room temperature cure time and a specific gravity of 2.5. Widely used by both OEM's and repair shops. The mix ratio is 1:1, by volume. It has a 20 year proven field history. Resistant to both R-12 and R-134a. The use of EPO dynaweight can save as much as 60% of your balancing time.

    In Stock

  • Dynamis BAL-XV-FS EPO Balance Compound

    Multiple item options available
    Mfr ID: BAL-XV-FSK
    Two-component epoxy dynamic balancing compound putty with a 15 minute pot life and 30 minute room temperature cure time.

     

    • 1(current)
    • 2