text.skipToContent text.skipToNavigation

Bearings

The widest range of high-performance bearing products to serve your needs across the automotive and industrial markets. You can rely on EIS for authentic bearings from NTN, Schaeffler-FAG, SKF, and more. These premium suppliers have developed technical solutions to lubrication challenges and innovative treatments for improved durability. Together, we offer you increased productivity and efficiency of operations through optimized bearing designs.

  • 1(current)
  • 2
  • 3
Displaying 1 - 21 of 156 products found
  • SKF 318M Single Row Deep Groove Radial Ball Bearing, 90 mm Bore x 190 mm OD x 43 mm W, Steel Cage

    ID: 318M
    Mfr ID: 300M
    SKF 300M Series single row deep groove ball bearings with filling slots have a filling slot in both the inner and outer rings to accommodate more balls than standard deep groove ball bearings. Filling slot bearings have a higher radial load carrying capacity than bearings without filling slots, but their axial load carrying capacity is limited. They are also unable to operate at the same high speeds as bearings without filling slots. Deep groove ball bearings with filling slots are available open or with shields. They are also available with or without a snap ring groove. Open bearings that are also available with shields, may have recesses in the outer ring. Large size deep groove ball bearings with filling slots, without cage are available on request.

    In Stock

  • Schaeffler N3 Series Two-Piece Cylindrical Roller Bearing

    Multiple item options available
    Mfr ID: FAG-N3
    Schaeffler N3 single row cylindrical roller bearings with cage are units comprising solid inner and outer rings together with cylindrical roller and cage assemblies. The outer rings have rigid ribs on both sides or no ribs, the inner rings have one or two rigid ribs or are designed without ribs. The cage prevents the cylindrical rollers from coming into contact with each other during rolling, the cage type bearings are very rigid, can support high radial loads and, due to the cage, are suitable for higher speeds than the full complement designs. Bearings with the suffix E have a higher capacity roller set and are thus designed for very high load carrying capacity, the bearings are separable and are therefore easier to fit and dismantle. Both bearing rings can be given a tight fit by this process. Single row cylindrical roller bearings with cage are available as non-locating, semi-locating and locating bearings.

     

  • NTN 22316UAVS2 Shaker Screen Spherical Roller Bearing, 80 mm Bore x 170 mm OD x 58 mm W, Machined Brass Cage

    ID: 22316UAVS201
    Mfr ID: 22316UAVS201
    Mfr: NTN
    NTN Standard Bore Open Shaker Screen Spherical Roller Bearing, 80 mm Bore Dia, Round Bore, Machined Brass Cage, Clearance: C4, 365000 N Dynamic Load, 2.1 mm Fillet Radius, 170 mm OD, Through Hardened Steel Rolling Element, 1700 rpm (Grease), 2400 rpm (Oil), 340000 N Static Load, -40 to 120 deg C, 58 mm Width.

     

  • Posi Lock Puller Jaw Head Assembly

    Multiple item options available
    Mfr ID: JawHeadAssembly
    Posi Lock Puller Jaw Head Assembly, 3 Jaw.

     

  • SKF C22 Toroidal Roller Bearing

    Multiple item options available
    Mfr ID: SKF_C22
    CARB steroidal roller bearings combine the self-aligning capability of spherical roller bearings with the axial displacement ability of cylindrical roller bearings CARB bearings can also have the compact cross section and high load carrying capacity normally associated with needle roller bearings. CARB bearings are intended exclusively as non-locating bearings. They can simplify locating/non-locating bearing arrangements because thermal expansion of the shaft can be accommodated within the bearing virtually without friction. Bearing systems consisting of a spherical roller bearing in the locating position and a CARB bearing in the non-locating position provide a space- and weight-saving bearing system with a low cost of ownership. CARB bearings can reduce noise and vibration levels, for example, in paper machines and fans. CARB bearings are single row bearings with long, slightly barrel-shaped symmetrical rollers. The outer ring has a torus-shaped raceway with a profile radius extending beyond the centre of the bearing. The inner ring raceway is shaped accordingly. The rollers of CARB bearings are self-guiding, i.e. they always adopt the position where the load is favorably distributed over the roller length, irrespective of whether the bearing rings are misaligned or axially displaced. The ability to distribute loads favorably keeps the friction and frictional heat at low levels. Lower operating temperatures extend the service life of the lubricant and the bearing.

    In Stock

  • SKF TIH Bearing Heater Yoke For TIH030

    Multiple item options available
    Mfr ID: TIH Yoke
    SKF Bearing Heater Yoke, For Use With: TIH 030M Small Induction Heater.

     

  • Leeson 002079.03 Ball Bearing

    ID: 002079-03
    Mfr ID: 2079.03
    Leeson 002079.03 ball bearing.

     

  • Leeson 002001.03 Ball Bearing

    ID: 002001.03
    Mfr ID: 2001.03
    Leeson 002001.03 ball bearing.

     

  • Leeson 002001.04 Ball Bearing

    ID: 002001.04
    Mfr ID: 2001.04
    Leeson 002001.04 ball bearing.

     

  • Leeson 002004.06 Ball Bearing

    ID: 002004.06
    Mfr ID: 2004.06
    Leeson 002004.06 ball bearing.

     

  • 608ZZ.31203 Single Row Deep Groove Radial Ball Bearing, Double Shield, Pressed Steel Cage

    ID: 608ZZ.31203
    Mfr ID: 608ZZ.31203
    EIS Approved Single Row Deep Groove Radial Ball Bearing, Pressed Steel Cage, 1 Row, Double Shield Seal.

    In Stock

  • NTN 641001 Single Row Deep Groove Radial Ball Bearing, 50 mm Bore x 130 mm OD x 31 mm W, Pressed Steel Cage

    ID: 641001
    Mfr ID: 641001
    NTN Single Row Open Deep Groove Radial Ball Bearing, 50 mm Bore Dia, Pressed Steel Cage, Clearance: C3, 83000 N Dynamic Load, 2.1 mm Fillet Radius, 1 Row, 130 mm OD, Steel Rolling Element, 5700 rpm Limiting (Grease), 6700 rpm Limiting (Oil), 49500 N Static Load, -40 to 120 deg C, 31 mm Width.

    In Stock

  • U.S. Motors B4574417800070L Ball Bearing

    ID: B4574417800070L
    Mfr ID: B4574417800070L
    U.S. Motors Ball Bearing.

     

  • SKF BB1B24869704 Deep Groove Radial Ball Bearing

    ID: BB1B24869704
    Mfr ID: BB1B24869704
    SKF Special Deep Groove Radial Ball Bearing, Tolerance Class: P6, P5.

     

  • IPS-Electro-Mec EMI01-A Bearing Sleeve

    Multiple item options available
    Mfr ID: EMI01-A
    IPS-Electro-Mec EMI01-A bearing sleeve, cast.

    In Stock

  • IPS-Electro-Mec EMI01-D DOM Bearing Sleeve

    Multiple item options available
    Mfr ID: EMI01-D
    IPS-Electro-Mec EMI01-D DOM bearing sleeve.

     

  • Schaeffler 6000 Single Row Deep Groove Radial Ball Bearing

    Multiple item options available
    Mfr ID: FAG_6000
    Schaeffler 6000 deep groove ball bearings are versatile, self-retaining bearings with solid outer rings, inner rings and ball and cage assemblies. These products, which are of simple design, robust in operation and easy to maintain, are available in single and double row designs and in open and sealed variants. Due to the manufacturing processes used, open bearings can have turned recesses in the outer ring for seals or shields. Due to their low frictional torque, deep groove ball bearings are suitable for high speeds.

    In Stock

  • Schaeffler NJ3 Series Two-Piece Cylindrical Roller Bearing

    Multiple item options available
    Mfr ID: FAG-NJ3
    Schaeffler NJ3 single row cylindrical roller bearings with cage are units comprising solid inner and outer rings together with cylindrical roller and cage assemblies. The outer rings have rigid ribs on both sides or no ribs, the inner rings have one or two rigid ribs or are designed without ribs. The cage prevents the cylindrical rollers from coming into contact with each other during rolling, the cage type bearings are very rigid, can support high radial loads and, due to the cage, are suitable for higher speeds than the full complement designs. Bearings with the suffix E have a higher capacity roller set and are thus designed for very high load carrying capacity, the bearings are separable and are therefore easier to fit and dismantle. Both bearing rings can be given a tight fit by this process. Single row cylindrical roller bearings with cage are available as non-locating, semi-locating and locating bearings.

     

  • Schaeffler NU2 Series Two-Piece Cylindrical Roller Bearing

    Multiple item options available
    Mfr ID: FAG-NU2
    Schaeffler NU2 single row cylindrical roller bearings with cage are units comprising solid inner and outer rings together with cylindrical roller and cage assemblies. The outer rings have rigid ribs on both sides or no ribs, the inner rings have one or two rigid ribs or are designed without ribs. The cage prevents the cylindrical rollers from coming into contact with each other during rolling, the cage type bearings are very rigid, can support high radial loads and, due to the cage, are suitable for higher speeds than the full complement designs. Bearings with the suffix E have a higher capacity roller set and are thus designed for very high load carrying capacity, the bearings are separable and are therefore easier to fit and dismantle. Both bearing rings can be given a tight fit by this process. Single row cylindrical roller bearings with cage are available as non-locating, semi-locating and locating bearings.

    In Stock

  • Marathon MA-MN9 Series Ball Bearing

    Multiple item options available
    Mfr ID: MA-MN9
    Marathon MA-MN9 series ball bearing.

    In Stock

  • Leeson MN200-0002-001 Ball Bearing

    ID: MN200-0002-001
    Mfr ID: MN200-0002-001
    Leeson MN200-0002-001 ball bearing.

     

    • 1(current)
    • 2
    • 3