Leeson M1135139 DC Gearmotor, 1/8 HP, 7 rpm, 180V Armature, 34 Frame, TENV
- MFR #PE350
- EIS #MOTM1135139
- Series #PE350
- UPC #00069172009194
$1,144.25 / each
Available to Order
Refine your product below or compare all choices in the
Min QTY1QTY Increment1
more info
Why Buy From EIS?
- Authorized Distributor
- Fast Shipping
- Technical Support Available
Products You May Also Like
Products You May Also Like
| Stock Status | |||||
|---|---|---|---|---|---|
 | 180 V | 0.25 HP | 27 rpm | $ / each | |
| 180 VDC | 0.125 HP | 7 rpm | $ / each | |
| 180 V | 0.25 HP | 165 rpm | $ / each |
Leeson DC Gear Motor, Duty: Continuous, Enclosure Type: Totally Enclosed Non-Ventilated, Frame Size: 34, Insulation Type: Class F3, Overload Protector: No, Service Factor: 1, Shaft Diameter: 0.75 Inch, Shaft Length: 2 Inch, Shaft Position: Parallel, Temperature Rating: 40 deg C.
Leeson 34 frame continuous duty DC gear motor.
Applications
- For Mounting at Any Angle, but Motor Below the Reducer Should be Avoided to Prevent Leakage of Lubricant into the Motor Should the Motor Shaft Seal Fail
Features
- Rugged die cast aluminum gear housing for maximum gear and bearing support
- Precision machined gearing, hardened for maximum load capability
- All gearing designed and rated to AGMA class 9 standards, and to withstand momentary shock overload of 200%
- Oversized output bearings for greater overhung load capacity and long life
- High carbon alloy output shaft provides maximum strength and rigidity
- All needle bearing journals are precision ground after heat treating to provide maximum fit and finish
- Heavy duty industrial oil seals keep lubricant in and dirt out
- Gears and bearings are splash lubricated with permanent, heavy duty gear oil
General Information
| Item Name | DC Gear Motor |
| Trade Name | Leeson |
| Series | PE350 |
General Features
| Type | DN |
| Standards | UL Listed, CSA Approved, CE Certified |
Design & Construction
| Duty | Continuous |
| Enclosure Type | Totally Enclosed Non-Ventilated |
| Frame Type | P353-34 |
| Gearhead Type | P353-34 |
| Insulation Type | Class F3 |
| Rotation | Reversible |
| Shaft Position | Parallel |
Performance Details
| Speed Rating | 7 rpm |
| Full Load Torque | 330 lb-Inch |
| Over-Hung Load | 565 lb |
| Overload Protector | No |
Electrical Properties
| Armature Voltage | 180 VDC |
| Full Load Ampere | 0.35 A |
| HP Rating | 0.125 HP |
| Service Factor | 1 |
| Voltage Rating | 180 VDC |
Physical Properties
| Bearing Size | OPE 608, PE 6201-13, Ball Bearing |
| Dimensions | 11.31 Inch L x 5 Inch W |
| Shaft Length | 2 |
| Frame Size | 34 |
| Shaft Diameter | 0.75 Inch |
Environmental Condition
| Temperature Rating | 40 °C |
Documents
No Documents Found