Von Roll/John C Dolph Synthite® Dolph-Spray® ER-41 Air-Drying Varnish, 20 oz, Red
MFR #:391100
EIS #:DOLER41
MFR #:391100
EIS #:DOLER41
In Stock
Min Qty:1
|Qty Increment:1
ER-41 is a high-temperature, fast cure, air dry, polyurethane varnish, and is an excellent insulator coating for all electrical and electronic parts. Synthite® ER-41 is also available in aerosol as Dolph - Spray® ER-41.
Von Roll/John C Dolph Synthite® Dolph-Spray® ER-41 Air-Drying Varnish, Room Temperature Cure Type, 1800 V/Mil (Dry), 1200 V/Mil (Wet) Dielectric Strength, 10 - 30 min Dry Time, 81 °F Flash Point, 10 - 30 min At 77 °F Full Cure Time, 155 °C Temperature Rating, 200 - 350 CP At 25 °C Viscosity, 4.4 lb/gal VOC.
$17.54 / each
Min Qty:1
|Qty Increment:1
ER-41 is a high-temperature, fast cure, air dry, polyurethane varnish, and is an excellent insulator coating for all electrical and electronic parts. Synthite® ER-41 is also available in aerosol as Dolph - Spray® ER-41.
Von Roll/John C Dolph Synthite® Dolph-Spray® ER-41 Air-Drying Varnish, Room Temperature Cure Type, 1800 V/Mil (Dry), 1200 V/Mil (Wet) Dielectric Strength, 10 - 30 min Dry Time, 81 °F Flash Point, 10 - 30 min At 77 °F Full Cure Time, 155 °C Temperature Rating, 200 - 350 CP At 25 °C Viscosity, 4.4 lb/gal VOC.
Product Options
Showing 4 out of 4 options
 | Container Size: 1 gal | EIS Part #: DOLER41G | $ / US gallon | |
| Container Size: 5 gal | EIS Part #: DOLER415G | $ / US gallon | |
| Container Size: 55 gal | EIS Part #: DOLER4155G | $ / US gallon | |
| Container Size: 20 Oz | EIS Part #: DOLER41 | $ / each |
- Attributes
- Applications
- Features
- Documents
Attributes
General Information
Item NameVarnish
Trade NameVon Roll John Cdolph
SeriesSynthite® Dolph-Spray® ER-41
General Features
Shelf Life12 Months
TypeAir-Drying
Design & Construction
ColorRed
Cure TypeRoom Temperature
Performance Details
Dry Time10 min
Full Cure Time10 - 30 min at 77 °F
Technical Details
Flash Point81 °F
Chemical Properties
Viscosity200 cP
VOC4.4 lb/gal
Electrical Properties
Dielectric Strength1800 V/mil
Physical Properties
Container Size20 oz
Container TypeCan
Environmental Condition
Temperature Rating155 °C
Applications
- For Field Coils, Control Coils, Motor Frames, Switch Bases, Molded Bakelite, Electrical Connectors, Collector Rings, Fuse Tubes, Solenoid Coils, Controller Shafts, Printed Circuit Boards, Commutator Ends, Bus Bars, Oil Reservoir Interior
Features
- High-temperature, fast cure, air dry, polyurethane varnish, and is an excellent insulator coating for all electrical and electronic parts
- Fast drying
- Excellent chemical resistance
- Excellent hiding power for rebuilding and manufacturing applications
- Oil and moisture resistant
- Superior abrasion resistance
- Excellent adhesion
- Dielectric Strength: 1800 V/Mil (Dry), 1200 V/Mil (Wet)
- Viscosity: 200 - 350 CP at 25 °C
- Dry Time: 10 - 30 min
- Viscosity: 200 - 350 cP