text.skipToContent text.skipToNavigation

Martindale Electric TUNSV106-.03550 V-Slot Undercutting Saw, 1-1/4" x 3/8" x 0.035", Tungsten Carbide, 50 deg

ID: TUNSV106.03550 Mfr ID: TUNSV106-.03550
Manufactured by: Martindale Electric
The tungsten carbide 50 deg v-slot undercutting saws are carefully designed as to tooth form, hollow grind, hardness, etc. and are manufactured to close tolerances. While used primarily for undercutting mica and slotting risers of commutators, Martindale undercutting saws are also used for cutting steel, aluminum, plastics and other materials not requiring set teeth.

Select by Part Number

OR
Select Options Below
Thickness
Blade Diameter
Arbor Size

USD $70.13 / PC

Check availability  dvywebrxdaexsbxaacuerzafvfx

This item may be sold in units of 1.

  • Brand name :  Martindale Electric
  • Series :  martindale_tun_v50-cutters
  • Item Name :  Undercutting Saw
  • Short Desc :  SAW,V-SLOT,1-1/4X3/8X.035,50DEG,TUNGSTEN
  • UNSPSC :  27112802

When 50 deg v-slot carbide saws are used on other equipment than our undercutters, steel supporting washers are recommended to reduce breakage. Carbide saw blades are harder than high speed steel saws, therefore more brittle and should not be subjected to applications where shock may shorten the service life.

Design & Construction
Material Tungsten Carbide 
Angle 50  deg
Arbor Size 0.375 Inch 
Blade Type V-Slot 
Performance Details
Speed Rating 3000  rpm
Supporting Information
For Use With Close-Cut, Kut-Kwik, Utility, Bench-Type Model HV-3, Lathe-Type and Super Lathe-Type, Heavy-Duty Bench-Type Model H-9, Industrial Model HA-2 and Model UL Lathe Mounted Automatic Undercutters 
Physical Properties
Blade Diameter 1.25  Inch
Number of Teeth 22 
Thickness 0.035  Inch

Martindale Electric TUNSV106-.03550 V-Slot Undercutting Saw, 1-1/4" x 3/8" x 0.035", Tungsten Carbide, 50 deg Brochure 

Martindale Electric TUNSV106-.03550 V-Slot Undercutting Saw, 1-1/4" x 3/8" x 0.035", Tungsten Carbide, 50 deg Catalog 

Features :

  • Spindle speeds may vary from 3000 - 12000 rpm, depending on saw outside diameter
  • These can be used on rigid stationary equipment
  • Tungsten carbide V-slot saws have ample radial relief.
  • The teeth of undercutting saws have a slight land to give strength to the cutting edge.
  • Speed Rating: 3000 - 12000 rpm

Applications :

  • For Cutting Steel, Aluminum, Plastics, Mica and other Materials