MFR #:LTHU101
EIS #:PH18-LTHU101
MFR #:LTHU101
EIS #:PH18-LTHU101
As undercutting is done from the side of commutator the saw or V-cutter is set level with the lathe centers. A spring between hardened washers under the pulley allows the spindle to move (float) up or down and follow and existing slot that is being re-cut. Visit our video channel to learn more about Undercutter with Both Spindle!
As undercutting is done from the side of commutator the saw or V-cutter is set level with the lathe centers. A spring between hardened washers under the pulley allows the spindle to move (float) up or down and follow and existing slot that is being re-cut. Visit our video channel to learn more about Undercutter with Both Spindle!
Product Options
Voltage Rating: 115 V | Spindle Size: 0.1875 Inch | EIS Part #: MARTINLTHU101A | $ / Piece |
- Attributes
- Features
- Documents
Attributes
General Information
General Features
Performance Details
Electrical Properties
Features
- If a fixed spindle is desired, the spring can be removed and the pulley turned over
- For attaching directly to lathe
- Speed Rating: 2400 rpm HSS saw, 4900 rpm Tungsten Carbide saw