text.skipToContent text.skipToNavigation

Clamps & Work Positioners

Work holders and work positioning systems that allow you to work at any angle via a rotating vise head with a ball joint base. You can lock your work into any position as well as apply 90° tilt and leave your hands free to work. Bases and heads are interchangeable to accomodate almost every project and task.
  • 1(current)
  • 2
Displaying 1 - 21 of 27 products found
  • Panavise 346 Deluxe Jaw Pad, 1-7/8" W x 1-1/2" H, 2/Pack

    ID: 346-PAN
    Mfr ID: 346
    Mfr: Panavise
    The PanaVise 346 are replaceable neoprene jaw pads for vise heads. The thick molded pads feature a corrugated surface on one side to hold delicate objects and a "V" groove on the other side to hold round objects.

    In Stock

  • Excelta 227 Straight Single End Pin Vise

    Multiple item options available
    Mfr ID: 227
    Mfr: Excelta
    The brass handle pin vise has opening chuck and has an ESD-safe (10^10 Ohm/sq) ergonomic foam grip for comfort and ESD protection.

     

  • Excelta Straight Single End Pin Vise

    Multiple item options available
    Mfr ID: 227PV
    Mfr: Excelta
    The brass handle pin vise has chuck and has an ESD-safe (10^10 Ohm/sq) ergonomic foam grip for comfort and ESD protection.

     

  • Panavise 305 Low Profile Vise Base, 2-1/2" H

    ID: 305-PAN
    Mfr ID: 305
    Mfr: Panavise
    Our patented "split-ball" technology is built into every 305 series vise base so you can easily "Tilt, Turn and Rotate" your work. Bases are compatible with all 300 series Vise Heads and accept any 5/8 Inch (15.9 mm) diameter shaft. Models 300 and 305 are compatible with all 300 series Base Mounts. Mix and match to create the perfect combination!.

     

  • Panavise 308 Weighted Base Mount, 7-1/2" W x 6-7/8" D x 1-3/16" H

    ID: 308-PAN
    Mfr ID: 308
    Mfr: Panavise
    PanaVise is a major manufacture of vises and work holding tools. PanaVise's Tilt, Turn and Rotate technology has been applied to the product line, allowing for maximum efficiency and many different uses! Introducing the Panavise 308 weighted base mount, adds portability and stability to your vise! This husky, cast iron base mount features two wings for extra stability.

     

  • Panavise 315 Circuit Board Holder, 10-7/8" H

    ID: 315-PAN
    Mfr ID: 315
    Mfr: Panavise
    PanaVise is a major manufacture of vises and work holding tools. PanaVise's Tilt, Turn and Rotate technology has been applied to the product line, allowing for maximum efficiency and many different uses! All PanaVise products are covered by a limited lifetime warranty! Introducing the Panavise 315 circuit board holder, circuit board holders help you work quicker and smarter! The best holder ever created for working with circuit boards, this model fits all 300 series Bases.

     

  • Panavise 333 Rapid Assembly Circuit Board Holder, 10" H

    ID: 333-PAN
    Mfr ID: 333
    Mfr: Panavise
    PanaVise is a major manufacture of vises and work holding tools. PanaVise's Tilt, Turn and Rotate technology has been applied to the product line, allowing for maximum efficiency and many different uses! All PanaVise products are covered by a limited lifetime warranty! Introducing the Panavise 333 rapid assembly circuit board holder, Speed your production work! For quick circuit board rotation and component insertion/soldering, nothing beats this work holding tool for speed and versatility.

     

  • Panavise 344 Grooved Vise Jaw

    ID: 344-PAN
    Mfr ID: 344
    Mfr: Panavise
    PanaVise is a major manufacture of vises and work holding tools. PanaVise's Tilt, Turn and Rotate technology has been applied to the product line, allowing for maximum efficiency and many different uses! Introducing the Panavise 343 nylon jaws (pair) for 301, 303, 304 and 381 with screws, Perfect for small tubes, rods or circuit boards! Standard replacement jaws for our 303 and 304 vise heads. Type 6/6 nylon jaws for jobs requiring electrical insulation and gentle holding power. Continuous heat tolerance to 200 deg F (93 deg C), intermittent heat to 300 deg F (149 deg C).

     

  • Panavise 396 Wide Opening Head Vise, 7-5/16" H

    ID: 396-PAN
    Mfr ID: 396
    Mfr: Panavise
    PanaVise is a major manufacture of vises and work holding tools. PanaVise's Tilt, Turn and Rotate technology has been applied to the product line, allowing for maximum efficiency and many different uses! All PanaVise products are covered by a limited lifetime warranty! Introducing the Panavise 396 wide opening head panavise, The work holding tool with expanded capabilities! The jaws on this vise open a generous 6 Inch. Wide opening jaws open to 6 Inch (152.4 mm) and close to zero.

     

  • Panavise 502 Precision PanaPress, 7" H

    ID: 502-PAN
    Mfr ID: 502
    Mfr: Panavise
    PanaVise is a major manufacture of vises and work holding tools. PanaVise's Tilt, Turn and Rotate technology has been applied to the product line, allowing for maximum efficiency and many different uses! All PanaVise products are covered by a limited lifetime warranty! Introducing the Panavise 502 precision panpress, Ideal for pressing bearings, sleeves, collars, forming and assembling small parts, broaching, staking, etc. This precision 1/4 ton (227kg) PanaPress (arbor press) is extremely useful in manufacturing or as a repair tool. Reversible ram applies up to 1/4 ton (500 lb / 227kg) of pressure and is 3/4 Inch x 3/4 Inch (19.1 mm x 19.1 mm) square and 5-7/8 Inch (149.2 mm) long.

     

  • Grobet 58.205 Pin Vise, 3-1/8" L, 0 - 0.028" Chuck Opening, Brass Handle

    ID: 58.205
    Mfr ID: 58.205
    Steel collet is set into hollow brass handle with screw chuck with capacity of 0 - 0.028 Inch and overall length 3.125 Inch.

     

  • X-ACTO 75170 Double Alligator Clamp

    ID: 75170-XAC
    Mfr ID: 75170
    Mfr: X-ACTO
    The X-TRA Hands dual alligator clamps with 2X magnifying glass by X-ACTO is the perfect solution for any hobbyist or designer who needs a second set of hands to hold onto materials.

     

  • General Tools #94C Pin Vise, 3-13/16" L, 0.045 - 1/8" Chuck Opening

    ID: 94C-GEN
    Mfr ID: #94C
    The #94C 7/16 Inch pin vise can hold small drills, deburrers, wires, files, reamers and other small tools. Hardened collet at each end and hollow nickel-plated body permits use of a long wire or rods .

     

  • Panavise 201 Junior Miniature Vise, 7.6" W x 4.7" D x 6-3/4" H

    ID: 201-PAN
    Mfr ID: 201
    Mfr: Panavise
    The easy-to-use single knob controls head movement through 3-planes 210 deg tilt, 360 deg turn and 360 deg rotation. Fine/coarse adjusting knob controls jaw pressure for delicate work. Neoprene jaw pads are available for holding extremely delicate items.

     

  • Panavise 300 Standard Vise Base, 6.3" W x 4.7" D x 3-3/4" H

    ID: 300-PAN
    Mfr ID: 300
    Mfr: Panavise
    Our patented "split-ball" technology is built into every 300 series vise base so you can easily "Tilt, Turn and Rotate" your work. Bases are compatible with all 300 series Vise Heads and accept any 5/8 Inch (15.9 mm) diameter shaft. Models 300 and 305 are compatible with all 300 series Base Mounts. Mix and match to create the perfect combination!.

     

  • Panavise 303 Standard General Purpose Vise Head, 4-1/4" H

    ID: 303-PAN
    Mfr ID: 303
    Mfr: Panavise
    PanaVise is a major manufacture of vises and work holding tools. PanaVise's Tilt, Turn and Rotate technology has been applied to the product line, allowing for maximum efficiency and many different uses! Introducing the Panavise 303 standard head, our best selling general purpose vise head. Perfect for hobbies, electronics and small home repairs! Select the 300, 305 or 380 base and create your own versatile vise. Jaws are 2-1/2 Inch (63.5 mm) wide, 1/2 Inch (12.6 mm) tall and open to 2-1/4 Inch (57.1 mm). Nylon jaws offer excellent electrical insulation and gentle holding power, continuous heat tolerance up to 200 deg F (93 deg C), intermittent heat to 300 deg F (149 deg C). Vice accessories available for this head.

     

  • Panavise 301 Standard Vise, 6-1/4" H

    ID: 301-PAN
    Mfr ID: 301
    Mfr: Panavise
    The PanaVise 301 holding tool is designed for use in small projects requiring precise secure holding power. The 301 vise PanaVise s original small work holding tool features lateral adjustability up to 90 deg along with 360 deg turns and rotations smooth insulated nylon jaws for gentle holding power heat-tolerant materials a detachable head assembly and base combination and compatibility with optional vise components. It is suited for use for hobbies electronics small home repairs and standard work bench applications. PanaVise s original small vise perfect for both industrial and hobby applications. View larger. Turn Tilt and Rotate Items for Industrial and Hobby Applications The PanaVise 301 standard vise is lightweight yet durable and works well for industrial and hobby applications. The vise is designed around a vise head assembly connected to a die cast zinc base by PanaVise s patented ball joint clamp system known as a split-ball.

     

  • Panavise 304 Low Profile Vise Head, 7-3/4" H

    ID: 304-PAN
    Mfr ID: 304
    Mfr: Panavise
    PanaVise is a major manufacture of vises and work holding tools. PanaVise's Tilt, Turn and Rotate technology has been applied to the product line, allowing for maximum efficiency and many different uses! All PanaVise products are covered by a limited lifetime warranty! Introducing the Panavise 304 Low profile Head, popular for jewelry making, watch repair and lapidary work! This unique head can be positioned more closely to the work surface and is perfect for use under a magnifying light. When used with a 305 low profile base, you can create a very low profile vise. Features steel jaws.

     

  • Panavise 311 Bench Clamp Base Mount

    ID: 311-PAN
    Mfr ID: 311
    Mfr: Panavise
    PanaVise is a major manufacture of vises and work holding tools. PanaVise's Tilt, Turn and Rotate technology has been applied to the product line, allowing for maximum efficiency and many different uses! Introducing the Panavise 311 bench clamp base mount, clamps to a table, workbench, ladder or wherever you need it! Take your vise anywhere you need it! Clamps to anything up to 3-7/16 Inch (87.3 mm) thick. Compatible with the 201 PV Jr. Vise, 300 and 305 bases. Includes four non-marring, antiskid neoprene pads for additional antislip characteristics without excessive tightening of the clamping screw. Finger grip for added convenience.

     

  • Panavise 312 Tray Base Mount, 3/4" H

    ID: 312-PAN
    Mfr ID: 312
    Mfr: Panavise
    PanaVise is a major manufacture of vises and work holding tools. PanaVise's Tilt, Turn and Rotate technology has been applied to the product line, allowing for maximum efficiency and many different uses! Introducing the Panavise 312 tray base mount, neatly organizes your small parts and tools! This cast aluminum base mount adds stability and has six integral parts wells with rounded and sloped walls for easy parts retrieval.

     

  • Panavise 343 Standard Smooth Insulated Vise Jaw, 5.2" W x 1.7" D x 1.6" H

    ID: 343-PAN
    Mfr ID: 343
    Mfr: Panavise
    PanaVise is a major manufacture of vises and work holding tools. PanaVise's Tilt, Turn and Rotate technology has been applied to the product line, allowing for maximum efficiency and many different uses! Introducing the Panavise 343 nylon jaws (pair) for 301, 303, 304 and 381 with screws, Excellent electrical insulation! Standard replacement jaws for our 303 and 304 vise heads. Type 6/6 nylon jaws for jobs requiring electrical insulation and gentle holding power. Continuous heat tolerance to 200 deg F (93 deg C), intermittent heat to 300 deg F (149 deg C).

     

    • 1(current)
    • 2