text.skipToContent text.skipToNavigation

Elantas PDG Sterling® E163 Single-Component Thixotropic Thermopoxy VPI Resin, 50 lb/5 gal

ID: PDGE16350LB Mfr ID: PDGE16350LB
Manufactured by: ELANTAS PDG, Inc.
Elantas PDG Sterling® E163 Single-Component Thixotropic Thermopoxy VPI Resin, 1.2342 g/cm3 (77 deg F (25 deg C)) Density, 11.5% At 25 deg C/77 deg F Elongation, >94 deg C (ASTM D93) Flash Point, 4 - 8 hr At 150 deg C/302 deg F Full Cure Time, 10 - 20 min At 150 deg C/302 deg F Gel Time, 74 Shore D Hardness, 5200 psi At 25 deg C/77 deg F Tensile Strength, 16000 - 22000 CP At 25 deg C/77 deg F, 2 rpm, 6000 - 8000 CP At 25 deg C/77 deg F, 20 rpm Viscosity.

USD $14.92 / LB

Buy more and save

50-649 $14.92 / LB
650-1249 $12.57 / LB
1250+ $10.85 / LB

Check availability 

This item may be sold in units of 50.

  • Brand name :  Elantas Pdg
  • Trade Name :  Sterling®
  • Series :  Sterling® E163
  • Item Name :  Thixotropic Thermopoxy VPI Resin
  • Short Desc :  THERMOPOXY,THIXO,E 163 50-LB/5-GAL PL
  • UNSPSC :  31201607

Sterling® E 163 thixo is a single-component, heat-cured, epoxy impregnating resin.

Performance Details
Elongation 11.5% at 25 deg C/77 deg F 
Full Cure Time 4 - 8 hr at 150 deg C/302 deg F 
Gel Time 10  min
Tensile Strength 5200  psi
Design & Construction
Form Liquid 
General Features
Shelf Life 3 Months 
Type Single-Component 
Net Weight 10.1 - 10.5 lb/gal 
Environmental Condition
Flash Point 94  deg C
Chemical Properties
Viscosity 16000  cP
Physical Properties
Hardness 74 Shore D 
Container Size 50  lb
Container Type Pail 

Elantas PDG Sterling® E163 Single-Component Thixotropic Thermopoxy VPI Resin, 50 lb/5 gal Brochure 

Elantas PDG Sterling® E163 Single-Component Thixotropic Thermopoxy VPI Resin, 50 lb/5 gal Safety Data Sheet (SDS) 

Features :

  • Excellent thermal shock resistance
  • Moisture and chemical resistant
  • No catalyst required
  • Thixotropic for minimal run-off
  • Excellent penetration in VPI process
  • Vacuum-pressure impregnation application methods
  • Store below 25 deg C / 77 deg F in a dry controlled environment out of direct sunlight
  • 8 - 12 Mils film build
  • 50 deg C heat deflection temperature
  • 3.1% 24 hrs at 250 deg C / 482 deg F weight loss
  • 0.04 at 60 Hz - 30 deg C / 86 deg F, 0.46 at 60 Hz - 60 deg C / 140 deg F dissipation factor
  • 4.5 at 60 Hz - 30 deg C / 86 deg F, 7.6 at 60 Hz - 60 deg C / 140 deg F dielectric constant
  • 1.8 x 10^12 Ohm-cm at 30 deg C / 86 deg F, 2.0 x 10^10 Ohm-cm at 60 deg C / 140 deg F volume resistivity
  • Secondary insulation
  • Gel Time: 8 - 15 min at 150 deg C (302 deg F)
  • Container Size: 50 lb/5 gal
  • Flash Point: >94 deg C (ASTM D93)
  • Viscosity: 16000 - 22000 CP at 25 deg C/77 deg F, 2 rpm, 6000 - 8000 CP at 25 deg C/77 deg F, 20 rpm
  • Density: 1.2342 g/cm3 (77 deg F (25 deg C))
  • Tensile Strength: 5200 psi at 25 deg C/77 deg F
  • Gel Time: 10 - 20 min
  • Viscosity: 16000 - 22000 cP

Applications :

  • Specifically Designed for Simultaneous Impregnation and Encapsulation of Stator Slots and End Windings