text.skipToContent text.skipToNavigation

Elantas PDG Sterling® Y663M-2 Single-Component Thermosetting Epoxy Adhesive, 8 lb/1 gal

ID: Y663M2G Mfr ID: Y663M2G
Manufactured by: ELANTAS PDG, Inc.
Elantas PDG Sterling® Y663M-2 Single-Component Thermosetting Epoxy Adhesive, Epoxy Base Type, 0.9466 g/cm3 (77 deg F (25 deg C)) Density, <-7 deg C (ASTM D93) Flash Point, 180 deg C Temperature Rating, 4100 psi At 25 deg C/77 deg F, 690 psi At 100 deg C/212 deg F (Aluminum – Aluminum), 4200 psi At 25 deg C/77 deg F, 1300 psi At 100 deg C/212 deg F (Glass Cloth – Glass Cloth) Tensile Strength, 75 - 225 CP At 25 deg C/77 deg F Viscosity.

USD $13.98 / LB

Buy more and save

8-103 $13.98 / LB
104-199 $11.77 / LB
200+ $10.16 / LB

Check availability 

This item may be sold in units of 8.

  • Brand name :  Elantas PDG
  • Trade Name :  Sterling®
  • Series :  Sterling® Y663M-2
  • Item Name :  Thermosetting Epoxy Adhesive
  • Short Desc :  JOINT COMPOUND,Y-663M-2 8LB/1-GAL
  • UNSPSC :  13111001

Sterling® Y663M-2 is a low viscosity, heat curable, thermosetting epoxy adhesive in a fast evaporating solvent.

Performance Details
Tensile Strength 4100  psi
Design & Construction
Base Type Epoxy 
Form Liquid 
General Features
Shelf Life 6 Months 
Type Single-Component 
Net Weight 7.7 - 7.9 lb/gal 
Environmental Condition
Temperature Rating 180  deg C
Chemical Properties
Viscosity 75  cP
Physical Properties
Container Size 8  lb

Elantas PDG Sterling® Y663M-2 Single-Component Thermosetting Epoxy Adhesive, 8 lb/1 gal Brochure 

Elantas PDG Sterling® Y663M-2 Single-Component Thermosetting Epoxy Adhesive, 8 lb/1 gal Safety Data Sheet (SDS) 

Features :

  • Excellent electrical properties
  • High peel and tensile shear strength
  • Dip, spray, brush, roll-through application methods
  • Secondary insulation
  • Non-volatiles: 34 - 38% at 0.5 g - 3 hr - 110 deg C
  • Gel Time: 10 - 15 min at 125 deg C/257 deg F
  • Container Size: 8 lb/1 gal
  • Flash Point: <-7 deg C (ASTM D93)
  • Viscosity: 75 - 225 CP at 25 deg C/77 deg F
  • Density: 0.9466 g/cm3 (77 deg F (25 deg C))
  • Tensile Strength: 4100 psi at 25 deg C/77 deg F, 690 psi at 100 deg C/212 deg F (Aluminum – Aluminum), 4200 psi at 25 deg C/77 deg F, 1300 psi at 100 deg C/212 deg F (Glass Cloth – Glass Cloth)
  • Viscosity: 75 - 225 cP

Applications :

  • For Preparing Pre-Pregs of Fibrous Cloth or Mat, Structural Adhesive or Coating for Metallic Sheet and Foil, B-Stage Coating of Electrical Sheet Steel for Core Laminations, B-Stage Coating of Copper and Aluminum Foil for Subsequent Lamination to Printed Circuit Boards