text.skipToContent text.skipToNavigation

Glass Tapes

  • 1(current)
  • 2
  • 3
Displaying 1 - 21 of 102 products found
  • 3M 1339 Polyester/Glass Filament Electrical Tape

    Multiple item options available
    Mfr ID: 1339
    3M electrical tape 1339 is a polyester film/glass filament tape coated with a pressure sensitive acrylic adhesive system. The polyester film/glass backing has excellent physical and electrical characteristics. The back side of the tape has a special coating which allows for an even, controlled unwind.

     

  • Intertape 4618 Glass Electrical Tape

    Multiple item options available
    Mfr ID: 4618
    Intertape 4618 Inert, high strength backing and heat resistant silicone adhesive for high temperature applications. This tape resists edge fraying and rotting and is flexible and varnish absorbent. Used in applications where solvent resistance, flame retardance and abrasion resistance is required.

    In Stock

  • Intertape 4616-08 Plastic Core Glass Electrical Tape

    Multiple item options available
    Mfr ID: 4616-08-PC
    Intertape 4616 plastic cored woven fiberglass backing imparts high temperature resistance and thermal stability and offers outstanding abrasion resistance for a large number of applications. Offers high adhesion and resistance to tearing. Rubber thermosetting adhesive system give the tape excellent solvent resistance.

     

  • Intertape 51597 Plastic Core Polyester/Glass Filament Electrical Tape

    Multiple item options available
    Mfr ID: 51597-PC
    Intertape 51597 has high tensile strength, conformable backing and aggressive adhesive for a large variety of insulating and holding applications. Plastic cored tape is resistant to chemicals, solvents and aging and offers a high dielectric strength and insulation resistance.

     

  • Mutual Industries C15010X1WS Weave Set Fiberglass Woven Tape, 1" x 36 yd x 10 Mil

    ID: C15010X1WS
    Mfr ID: C15010X1WS
    10 Mil weave set tapes are non-flammable. Exceptional stability and high tensile strength. Will not absorb moisture and will not deteriorate.

     

  • Von Roll 76504P Fusa-Fab® Flexible Tape

    Multiple item options available
    Mfr ID: 76504P
    Fusa-Fab products are suggested for use as tough, rigid, armor tapes after cure on DC field and commutating pole coils, and compensating pole windings. Fusa-Fab products may also be used for insulating studs or bolts, forming spool bodies, and the manufacture of laminates for use as terminal boards. Fusa-Fab products have excellent resistance to refrigerants and may be used as phase insulation in hermetic motors

     

  • Von Roll 600VR Acuflex® Tape

    Multiple item options available
    Mfr ID: 600VR
    Acuflex 600 series materials are polyester resin coated, straight woven polyester/glass fabrics with 155 deg C thermal capability, excellent flexibility, good tear strength and high tensile strength. The polyester warp threads allow for some stretch and improved conformability over glass only constructions. Additional treatments are available including oil and silicone slip coats, pressure sensitive adhesives and liners

     

  • Von Roll 601-210 Tape, 1" x 36 yd x 0.01", Black

    ID: VG601210X1
    Mfr ID: 601-210
    Von Roll 601-210 Tape

     

  • Von Roll 602-210 Tape, 18" x 36 yd x 0.01"

    ID: VRI602210X18X36
    Mfr ID: 602-210
    Von Roll 602-210 Tape

     

  • Von Roll 76591 Fusa-Fab® Flexible Tape, 0.75" x 36 yd x 0.254", Natural

    ID: VG76591X.75
    Mfr ID: 76591
    Fusa-Fab High temperature F and H Class semi cured, natural low volatile, polyester resin impregnated fabrics. They are available in a variety of thicknesses, with and without a polyethylene film interliner. The suffix P is used to designate products supplied without an interliner

     

  • Von Roll 76591P Fusa-Fab® Natural Flexible Tape

    Multiple item options available
    Mfr ID: 76591P
    Fusa-Fab High temperature F and H Class semi cured, low volatile, polyester resin impregnated fabrics. They are available in a variety of thicknesses, with and without a polyethylene film interliner. The suffix P is used to designate products supplied without an interliner

     

  • Von Roll 76593 Fusa-Flex® Tape

    Multiple item options available
    Mfr ID: 76593
    Fusa-Flex is a B-stage epoxy coated polyester glass tape that fuses during cure to provide a tough moisture and chemical seal on AC stator and DC armature coils. Flow of resin during cure, together with shrinkage of the polyester warp threads, ensures a leak-proof seal without external pressure application. Cure occurs in only one hour at 170 deg C, permitting rapid "turn around" for repair shops and minimum oven time. Cured Fusa-Flex tape provides low dissipation factor, high dielectric strength and insulation resistance

    In Stock

  • Von Roll 515-210 Tape, 1.5" x 36 yd, Yellow

    ID: VC515210YX1.5
    Mfr ID: 515-210
    Von Roll 515-210 Tape.

     

  • Von Roll 700-052 Tape, 1.5" x 36 yd x 0.01"

    ID: VG700052X1.5
    Mfr ID: 700-052
    Von Roll 700-052 Tape.

     

  • Carolina Narrow Fabric 10 Mil Plain Woven Fiberglass Tape

    Multiple item options available
    Mfr ID: CAR164FGT-10
    10 Mil woven fiberglass tapes have a wide range of uses in the electrical equipment market: Transformers, motors, generators, switch gears, consumer appliances and electronic equipment use these tapes to insulate, seal, or strengthen their various components.

     

  • Carolina Narrow Fabric 5 Mil Plain Woven Fiberglass Tape

    Multiple item options available
    Mfr ID: CAR164FGT-5
    5 Mil woven fiberglass tapes have a wide range of uses in the electrical equipment market: Transformers, motors, generators, switch gears, consumer appliances and electronic equipment use these tapes to insulate, seal, or strengthen their various components.

     

  • Hesgon 100% Fiberglass 10 Mil Type A Medium Weave Non-Shrinkable Tape

    Multiple item options available
    Mfr ID: GT-H-F-10-A
    Mfr: Hesgon
    Hesgon 10 Mil type A medium tapes are manufactured of 100% fiberglass yarns with a minimum amount of sizing thus allowing for good wet-out impregnation. All tapes are also available in our standard or custom finishes. In order to achieve maximum results with all the various resins available we are always striving to improve our various finishes.

     

  • Hesgon 100% Fiberglass 5 Mil Type M Non-Shrinkable Tape

    Multiple item options available
    Mfr ID: GT-H-F-5-M
    Mfr: Hesgon
    Hesgon 5 Mil type M tapes are manufactured of 100% fiberglass yarns with a minimum amount of sizing thus allowing for good wet-out impregnation. All tapes are also available in our standard or custom finishes. In order to achieve maximum results with all the various resins available we are always striving to improve our various finishes.

     

  • 3M 1046 Polyester/Glass Filament Electrical Tape

    Multiple item options available
    Mfr ID: 1046
    3M electrical filament tape 1046 is a solvent-resistant, high temperature filament tape with thermosetting rubber adhesive. Designed for applications needing both the dielectric strength of polyester film and the high mechanical strength of glass fibers.

     

  • 3M 1139 Paper Core Polyester/Glass Filament Electrical Tape

    Multiple item options available
    Mfr ID: 1139
    3M filament tape 1139 is a solvent-resistant, high temperature filament tape with acrylic adhesive. Designed for applications needing both the dielectric strength of polyester film and the high mechanical strength of glass fibers. Low stretch, high tensile and edge-tear resistant's.

     

  • 3M 1339 Plastic Core Polyester/Glass Filament Electrical Tape

    Multiple item options available
    Mfr ID: 1339-PC
    3M electrical tape 1339 is a plastic cored polyester film/glass filament tape coated with a pressure sensitive acrylic adhesive system. The polyester film/glass backing has excellent physical and electrical characteristics. The back side of the tape has a special coating which allows for an even, controlled unwind.

     

    • 1(current)
    • 2
    • 3