EIS

Would you like to sign up for deals, discounts, and other important updates from EIS? Sign Up

Home
Home
Sign In / RegisterMy Account Overlay
0
0

Desco Statfree T2 Premium Dissipative Dual Layer Runner Table Mat

The image shown is representative of the product family and may not specifically be the individual item.

MFR #:6600

EIS #:PH13-6600

Series #:6600

MFR #:6600

EIS #:PH13-6600

Series #:6600

0
0
Desco's Statfree T2 worksurface mat is a 0.06 Inch thick, 2-layer, dissipative rubber material. It is designed to provide a path to ground and eliminate static charge generation when used as a worksurface table mat, shelf liner and cart liner. The surface resistance (1 x 10^6 - < 1 x 10^9 ohm RTT) of the color top layer meets ANSI/ESD S20.20 worksurface required limit and recommendation of ANSI/ESD S4.1 for contact with ESD susceptible items. The more conductive (< 1 x 10^6 ohm RTT) bottom black layer reduces the resistance to ground (RTG) from the top of the surface to the groundable point ground and allows the mats to be used with ESD continuous monitors. - High strength nitrile rubber mats designed to withstand abrasion, stretching, and tearing and may be used in soldering applications with flux and other chemicals. The Statfree T2 material is manufactured with high strength nitrile rubber that is designed to withstand abrasion, stretching, and tearing and may be used in soldering applications with flux and other chemicals (chemical resistance chart). Material formulation includes ultraviolet (UV) stabilizers to stabilize color retention to ensure ESD performance over time and eliminate surface layer deterioration resulting in cracking when the product is flexed.
$715.85
 - $1,277.62
Select from the options below
0
0
Desco's Statfree T2 worksurface mat is a 0.06 Inch thick, 2-layer, dissipative rubber material. It is designed to provide a path to ground and eliminate static charge generation when used as a worksurface table mat, shelf liner and cart liner. The surface resistance (1 x 10^6 - < 1 x 10^9 ohm RTT) of the color top layer meets ANSI/ESD S20.20 worksurface required limit and recommendation of ANSI/ESD S4.1 for contact with ESD susceptible items. The more conductive (< 1 x 10^6 ohm RTT) bottom black layer reduces the resistance to ground (RTG) from the top of the surface to the groundable point ground and allows the mats to be used with ESD continuous monitors. - High strength nitrile rubber mats designed to withstand abrasion, stretching, and tearing and may be used in soldering applications with flux and other chemicals. The Statfree T2 material is manufactured with high strength nitrile rubber that is designed to withstand abrasion, stretching, and tearing and may be used in soldering applications with flux and other chemicals (chemical resistance chart). Material formulation includes ultraviolet (UV) stabilizers to stabilize color retention to ensure ESD performance over time and eliminate surface layer deterioration resulting in cracking when the product is flexed.

Product Options

Showing 3 out of 3 options
The image shown is representative of the product family and may not specifically be the individual item.
Length
24 ft
Width
24 Inch
Color
Green
EIS Part #
66120-DES
$ / Roll
The image shown is representative of the product family and may not specifically be the individual item.
Length
40 ft
Width
48 Inch
Color
Dark Gray
EIS Part #
66100-DES
$ / Roll
The image shown is representative of the product family and may not specifically be the individual item.
Length
40 ft
Width
24 Inch
Color
Dark Gray
EIS Part #
66080-DES
$ / Roll

Attributes

General Information
Item NameTable Mat
Trade NameStatfree® T2
Series6600
General Features
StandardsRoHS Compliant, ANSI/ESD S20.20, S4.1
TypePremium Dissipative Dual Layer, Runner
Design & Construction
MaterialRubber
Physical Properties
Thickness0.06 Inch
Surface PatternSlight Embossed
Environmental Condition
ResistsHeat, Chemical
Supporting Information
For Use WithESD Workstation Continuous Monitors