MFR #:8800K
EIS #:PH13-8800K
Series #:8800K
MFR #:8800K
EIS #:PH13-8800K
Series #:8800K
8800 series dissipative rubber mat kit meet ANSI/ESD S20.20 required limit and the recommendation of work surface standard ANSI/ESD S4.1. They offer increased resistance to heat and hot solder as compared to vinyl or olefin materials. Compatible with continuous or constant monitors. - This kit is constructed using a top color layer of static dissipative neoprene rubber laminated to a bottom black layer of conductive neoprene rubber. Both layers are made from vulcanized synthetic rubber, which offers resistance to oil, grease and most common solvents.
Select from the options below
8800 series dissipative rubber mat kit meet ANSI/ESD S20.20 required limit and the recommendation of work surface standard ANSI/ESD S4.1. They offer increased resistance to heat and hot solder as compared to vinyl or olefin materials. Compatible with continuous or constant monitors. - This kit is constructed using a top color layer of static dissipative neoprene rubber laminated to a bottom black layer of conductive neoprene rubber. Both layers are made from vulcanized synthetic rubber, which offers resistance to oil, grease and most common solvents.
Product Options
Showing 1 out of 1 options
Color: Gray | EIS Part #: 8810-3M | $ / each |
- Attributes
- Features
Attributes
General Information
Item NameTable Mat Kit
Series8800K
General Features
StandardsRoHS Compliant, ANSI/ESD S20.20, S4.1, ESD TR53
Type2-Layer, Dissipative
Design & Construction
MaterialNeoprene Rubber
Physical Properties
Length4 ft
Thickness0.065 Inch
Width2 ft
Environmental Condition
ResistsOil, Grease, Most Common Solvents, Heat and Hot Solder
Supporting Information
For Use WithContinuous and Constant Monitor Systems
Includes(1) Table Mat, Size as Specified, (1) 3048 Wrist Strap Grounding System, (2) 3034 Snap Fasteners
Features
- 65 shore A hardness
- 1 x 10^6 - < 1 x 10^9 ohm surface to ground, surface to surface