text.skipToContent text.skipToNavigation

3M DP8010NS Scotch-Weld™ Non-Sag Structural Acrylic Adhesive, 45mL Dual Cartridge, Blue/Off-White, 12/Case

ID: 3MADP8010NS45ML Mfr ID: 62286514450
Manufactured by: 3M Industrial Adhesives and Tapes
3M Scotch-Weld structural plastic adhesive DP8010NS is a non-sag, two-part acrylic adhesive specially formulated to bond many low surface energy plastics, including many grades of polypropylene, polyethylene and thermoplastic elastomers (TPEs) without special surface preparation.

USD $58.70 / PC

Buy more and save

1-23 $58.70 / PC
24-35 $52.94 / PC
36-47 $48.21 / PC
48+ $40.91 / PC

Check availability 

This item may be sold in units of 1.

  • Brand name :  3M
  • Trade Name :  Scotch-Weld™
  • Series :  DP8010NS
  • Item Name :  Structural Acrylic Adhesive
  • Short Desc :  ADHESIVE,ACRYLIC,3M DP8010NS BLUE,45ML
  • Packaging :  12/Case
  • UPC :  00051115814518
  • UNSPSC :  31201600

3M Scotch-Weld acrylic adhesive DP8010NS starts with medium viscosity for controlled dispensing and spreads to sufficiently wet out the surface. The mix ratio is 10:1 and provides a 10 minute work life.

Design & Construction
Cure Type Room Temperature 
Form - Part-A Liquid 
Form - Part-B Liquid 
Color - Part-A Blue 
Color - Part-B Off White 
Performance Details
Full Cure Time 8 - 24 hr at 72 deg F 
Open Time 10 min at 72 deg F 
Shear Strength 2700 psi at 72 deg F 
Tensile Strength 1300 psi 
Electrical Properties
Dielectric Strength 603V/Mil 
Chemical Properties
Composition - Part-A Acrylic 
Composition - Part-B Acrylic 
Specific Gravity - Part-A 1.063 
Specific Gravity - Part-B 0.95 
VOC - Part-B 5.5g/L 
Viscosity - Part-A 17000 - 40000 cP 
Viscosity - Part-B 64000 cP 
Mixing Ratio 10:1 
Supporting Information
Applicable Materials Composites and Metals, LSE Plastics, Thermoplastic 
Application Method Epx Applicator 
Physical Properties
Container Size 45mL 
Container Type Dual Cartridge 
Hardness 60 Shore D 
Odor/Scent - Part-A Mild Acrylic 
Odor/Scent - Part-B Mild Acrylic 

3M DP8010NS Scotch-Weld™ Non-Sag Structural Acrylic Adhesive, 45mL Dual Cartridge, Blue/Off-White, 12/Case Technical Data Sheet 

3M DP8010NS Scotch-Weld™ Non-Sag Structural Acrylic Adhesive, 45mL Dual Cartridge, Blue/Off-White, 12/Case Safety Data Sheet (SDS) 

3M DP8010NS Scotch-Weld™ Non-Sag Structural Acrylic Adhesive, 45mL Dual Cartridge, Blue/Off-White, 12/Case Brochure 

Features :

  • Creates strong bond on low surface energy (LSE) plastics such as polyolefin with minimal or no surface prep required
  • Resists many chemicals, water, humidity and corrosion
  • Formulated to bond multi-material assemblies such as LSE plastics, thermoplastics, composites and metals
  • Medium viscosity allows controlled dispensing
  • 10 min work life with 60 min handling strength
  • Strong adhesive can replace screws, rivets and welding
  • Delivers non-sag formulation so adhesive stays where applied
  • Specific gravity of part B 0.95 - 1.05

Applications :

  • For Transportation, Specialty Vehicle, Metalworking, Construction, Medical, Military and Government, General Industrial, MRO, Electronics, Consumer Goods