text.skipToContent text.skipToNavigation

Heel / Toe Grounders

  • 1(current)
  • 2
Displaying 1 - 21 of 36 products found
  • Desco Hook and Loop Foot Sole Grounder

    Multiple item options available
    Mfr ID: 0750
    Mfr: Desco
    The premium sole grounders provide a more complete path to ground than regular heel or toe grounders due to a wider and more consistent contact area. The rubber sole pattern is made from a black conductive outer layer and a non-marring lining that prevents carbon marks on shoes. These units include a blue grounding tab with carbon suffused fibers and hook and loop fastening systems. The sole grounders are UL listed. The product has been tested to ESD STM 97.2 - floor materials and footwear voltage measurement in combination with a person. It is a suitable ESD footwear component in flooring - footwear system when used as the primary grounding method (< 3.5 x 10^7 ohm per ESD STM 97.1 floor materials and footwear-resistance measurement in combination with a person).

     

  • Desco 07599 Hook and Loop Foot Heel Grounder, Nylon Polyester Tab, Lime Green, 1 megohm Resistor

    ID: 07599-DES
    Mfr ID: 07599-DES
    Mfr: Desco
    Heel grounder converts non-ESD footwear to footwear that will provide a path-to-ground and will not generate a charge. High visibility neon lime green fastening system, adjustable sizing material expands to fit most shoe sizes comfortably. Non-marring interior will not leave marks on operator's shoes. 24 Inch conductive 8-strand nylon polyester grounding tab, additional conductive material provides reliable connection with operator's sweat-layer.

    In Stock

  • Desco 17155 High Visibility Heel Grounder, Polyester, Yellow/Black, 100/Pack

    ID: 17155-DES
    Mfr ID: 17155-DES
    Mfr: Desco
    Desco's disposable heel grounder provides a path-to-ground and does not generate a charge when used with an ESD floor. The material is non-marring and will not mark floors. The disposable heel grounder is designed for single use and should be removed and disposed of after use.

    In Stock

  • Desco 17222 Hook and Loop Foot Toe Grounder, Nylon, Blue/Black, 1 megohm Resistor

    ID: 17222-DES
    Mfr ID: 17222-DES
    Mfr: Desco
    The 17222 toe ground provides a continuous ground path between an operator and a properly grounded ESD protected flooring. These toe grounders are designed for use on standard shoes, including high heeled shoes. They can be easily adjusted to fit most wearers. Desco's toe grounders have a lining that prevents carbon marks on shoes. Toe grounder model 17222 has a discrete 1 megohm resistor built into the contact strip. The product has been tested to ESD STM 97.2 - floor materials and footwear voltage measurement in combination with a person. It is a suitable ESD footwear component in flooring - footwear system when used as the primary grounding method (< 3.5 x 10^7 ohm per ESD STM 97.1 floor materials and footwear-resistance measurement in combination with a person).

    In Stock

  • Desco Non-Marring Hook and Loop Foot Heel Grounder

    Multiple item options available
    Mfr ID: 1725
    Mfr: Desco
    Neoprene rubber with no exposed carbon, will not mar shoes or floors - reducing maintenance costs of touching up on floors. Hook and loop fastening system size adjustable material expands to fit most shoe sizes comfortably and flex during walking.

     

  • Desco 17272 Full Coverage Foot Grounder, L, Nylon Polyester Tab, Yellow/Black, 1 megohm Resistor

    ID: 17272-DES
    Mfr ID: 17272-DES
    Mfr: Desco
    The 17272 foot grounder provides contact with the ESD floor both under the foot's sole as well as the heel area, providing a more continuous and reliable path-to-ground. These foot grounder is easier to install than most foot grounders and are designed for use on standard shoes. The snug, reliable fit can be easily adjusted to fit the individual wearer. Made from non-marring three layer high visibility yellow reversible static dissipative rubber with a black conductive inner layer. The 17272 is UL listed. It is a suitable ESD footwear component in flooring - footwear system meeting ANSI/ESD S20.20 when used as the primary grounding method. It meets < 3.5 x 10^7 ohm per ANSI/ESD STM 97.1 floor materials and footwear-resistance measurement in combination with a person, and significantly under < 100V tested per ANSI/ESD STM 97.2 - floor materials and footwear voltage measurement in combination with a person.

     

  • Botron B750368 Pressure Sensitive Adhesive Heel Grounder, Non-Woven Polyester, High-Visibility Yellow, 100/Pack

    ID: B750368-BOT
    Mfr ID: B750368-BOT
    Mfr: Botron
    Botron's B750368 disposable heel ground is the ideal solution for visitors and temporary personnel on the work floor of static controlled environments.

    In Stock

  • Botron Hook and Loop Velcro with Plastic D-Ring Heel Grounder

    Multiple item options available
    Mfr ID: B7520
    Mfr: Botron
    The cup of the D-ring ESD heel grounder is a symmetrical design that can be reversed when put on. It also features a dual layer rubber with a non-marking inside and a conductive rubber outside. Has a 1.5 Inch wide rubber, securing both at the back and underneath the heel. Its 7.5 Inch length rubber provides enough cup volume to fit comfortably on those with larger shoe sizes.

     

  • Botron Ergo-One B7572 Non-Marking Hook and Loop Toe Grounder, Rubber

    ID: B7572-BOT
    Mfr ID: B7572-BOT
    Mfr: Botron
    Comfortable stretch material for easy adjustment. 2-layer rubber material with non-marking inner cup. 1.5 Inch wide reversible cup design.

     

  • SCS HGC1M Cup Hook and Loop Heel Grounder, Black, 1 megohm Resistor

    ID: HGC1M-SCC
    Mfr ID: HGC1M-SCC
    The re-positionable configuration of the heel grounder extends the life of the product and the elastic loop provides a secure and comfortable fit. Heel grounders are UL listed.

    In Stock

  • SCS HGS1M Standard Hook and Loop Heel Grounder, Black, 1 megohm Resistor

    ID: HGS1M-SCC
    Mfr ID: HGS1M-SCC
    The HGS1M standard style heel grounder provides a conductive sole under the heel, and a stretch-nylon strap around the back of the shoe. Heel grounders are designed and manufactured for comfort, durability and cost effectiveness.

     

  • SCS HGC1MD-BLUE Cup Hook and Loop with D-Ring Heel Grounder, Blue, 1 megohm Resistor

    ID: SCCHGC1MD-BLU
    Mfr ID: SCCHGC1MD-BLU
    Features a D-ring for quick, comfortable adjustment, blue hook and loop for improved visibility, and a re-positionable sole for extended performance. This quality grounder features a durable 2-layer sole, lot code and a 24 Inch conductive ribbon.

    In Stock

  • SCS HGC1M-ORGF395P Cup Velcro Heel Grounder, Orange, 1 megohm Resistor

    ID: SCCHGC1M-ORGF395P
    Mfr ID: SCCHGC1M-ORGF395P
    Bright elastic orange velcro lets you see at a glance who is wearing their heel grounders. Makes foot grounder compliance easy to verify.

     

  • SCS HGS1MD-RED Hook and Loop with D-Ring Heel Grounder, Red, 1 megohm Resistor

    ID: SCCHGS1MD-RED
    Mfr ID: SCCHGS1MD-RED
    The HGS1MD-RED heel grounder features a D-ring strap and elastic hook and loop for adjustability. Compliance verification is simplified by the bright red elastic strap.

    In Stock

  • Botron Snap-Loc Plastic Locking Snap Heel Grounder

    Multiple item options available
    Mfr ID: Snap-Loc
    Mfr: Botron
    The cup of the Snap-Loc heel grounder is a symmetrical design that can be reversed when put on. It also features a dual layer rubber with a non-marking inside and a conductive rubber outside. As with all of our static control heel grounders the Ergo One Series has a 1.5 Inch wide rubber, securing both at the back and underneath the heel. Its 7.5 Inch length rubber provides enough cup volume to fit comfortably on those with larger shoe sizes.

     

  • SCS TG1M Hook and Loop Toe Grounder, Black, 1 megohm Resistor, 1/Pack

    ID: TG1M-SCC
    Mfr ID: TG1M-SCC
    TG1M toe grounders are designed for use on standard shoes, including high heeled shoes. This quality toe grounder features a durable 2-layer sole and an 12 Inch multi-strand conductive ribbon.

    In Stock

  • Desco 07515 3-Layer Dual Cup Non-Marring Snap-Loc Foot Heel Grounder, Nylon Polyester Tab, Black/Blue, 2 megohm Resistor

    ID: 07515-DES
    Mfr ID: 07515-DES
    Mfr: Desco
    The 07515 foot grounder provides a continuous ground path between an operator and a properly grounded ESD protected floor. These foot grounders are designed for use on standard shoes. They can be easily adjusted to fit the individual wearer. These foot grounders are made from non-marring three layer grey reversible static dissipative rubber with a non-carbon tear resistant inner scrim layer. This unit includes a blue tab with carbon suffused fibers and a snap-loc system for quick and easy fastening and removal. Full elastic strap provides maximum flexing comfort. This heel grounder is UL listed. The product has been tested to ESD STM 97.2 - floor materials and footwear voltage measurement in combination with a person. It is a suitable ESD footwear component in flooring - footwear system when used as the primary grounding method (< 3.5 x 10^7 ohm per ESD STM 97.1 floor materials and footwear-resistance measurement in combination with a person).

     

  • Desco 07560 Adjustable Hook and Loop Foot Heel Grounder, Nylon Polyester Tab, Black, 1 megohm Resistor

    ID: 07560-DES
    Mfr ID: 07560-DES
    Mfr: Desco
    Desco 07560 foot heel grounder has outer conductive layer (10^5 ohm resistance to top), inner non-marking neoprene layer reinforced with 4.3 oz. polyester mesh scrim layer. 0.06 Inch thick, 1-1/4 Inch wide contact area. 30 Inch long, 3/8 Inch wide, 8 string black conductive ribbon. 3/4 Inch double sided hook and loop material, for quick and easy attachment to foot. 1 megohm series resistor to protect operator from accidental contact with equipment line voltage. Date coded. Provides lot traceability to ensure quality control and tracking information.

    In Stock

  • Desco 07588 Economy Hook and Loop Foot Heel Grounder, Nylon Polyester Tab, Black, 1 megohm Resistor

    ID: 07588-DES
    Mfr ID: 07588-DES
    Mfr: Desco
    2-layer rubber composite material. Material consists of a layer which provides a non-marring interior surface that will not blemish shoes and a black conductive layer to ground via ESD flooring. Non-marring interior will not mar shoes.

    In Stock

  • Desco Lined D-Ring Foot Heel Grounder

    Multiple item options available
    Mfr ID: 0759
    Mfr: Desco
    The 0759 premium series heel grounder provides effective ESD protection. The cup is made from a black and non-marring rubber with inner tear resistant conductive scrim. The rubber is antistatic, low tribocharging, and dissipative. It removes charges when in contact with ESD protected floors. This foot grounder meets the less than 3.5 x 10^6 ohm requirement of ANSI ESD S20.20. This unit includes either a one or two megohm molded external resistor, a conductive tab with carbon suffused fibers, and a D-ring fastening system. The product has been tested to ESD STM97.2 - floor materials and footwear voltage measurement in combination with a person. It is a suitable ESD footwear component in flooring - footwear system when used as the primary grounding method (< 3.5 x 10^7 ohm per ESD STM 97.1 floor materials and footwear-resistance measurement in combination with a person).

    In Stock

  • Desco 07595 Lined D-Ring Foot Toe Grounder, Nylon Polyester Tab, Light Blue/Black, 2 megohm Resistor

    ID: 07595-DES
    Mfr ID: 07595-DES
    Mfr: Desco
    The 07595 premium toe grounder provides effective ESD protection. The cup is made from a black and non-marring rubber with inner tear resistant conductive scrim. The rubber is antistatic, low tribocharging, and dissipative. It removes charges when in contact with ESD protected floors. This foot grounder meets the less than 3.5 x 10^6 ohm requirement of ANSI ESD S20.20. This unit includes a 2 megohm molded external resistor, a conductive tab with carbon suffused fibers, and a D-ring fastening system. The product has been tested to ESD STM 97.2 - floor materials and footwear voltage measurement in combination with a person. It is a suitable ESD footwear component in flooring - footwear system when used as the primary grounding method (< 3.5 x 10^7 ohm per ESD STM 97.1 floor materials and footwear resistance measurement in combination with a person).

    In Stock

    • 1(current)
    • 2