Von Roll DMD-100 Square Form Wedge, 24 Mil x 0.2968" x 0.1718", 1" Cut Piece Length
EIS #:WGEDMD241911X1.00
Series #:Dacron® Mylar® Dacron®-100-SQ-1
EIS #:WGEDMD241911X1.00
Series #:Dacron® Mylar® Dacron®-100-SQ-1
Out of Stock
Min Qty:1
|Qty Increment:1
DMD 100 is a Class "F" 3 layer insulation composite used as a coil separator, slot liner, wedge and phase insulation for both manual and automatic insertion. DMD 100 is a Class "F" 3 layer insulation composite used as a coil separator, slot liner, wedge and phase insulation for both manual and automatic insertion. It also serves as a primary layer and outer wrap insulation for transformers and for hermetically sealed motors.
$15.70 / 1000 Piece
Min Qty:1
|Qty Increment:1
DMD 100 is a Class "F" 3 layer insulation composite used as a coil separator, slot liner, wedge and phase insulation for both manual and automatic insertion. DMD 100 is a Class "F" 3 layer insulation composite used as a coil separator, slot liner, wedge and phase insulation for both manual and automatic insertion. It also serves as a primary layer and outer wrap insulation for transformers and for hermetically sealed motors.
- Attributes
- Features
- Applications
Attributes
General Information
Item NameSquare Form Wedge
Trade NameDacron® Mylar® Dacron®-100
SeriesDacron® Mylar® Dacron®-100-SQ-1
General Features
TypeTriplex
Design & Construction
MaterialPolyester
Insulation TypeClass F
Physical Properties
Height0.1718 Inch Inch
Length1 Inch
Thickness24 mil
Width0.2968 Inch
Features
- Tough
- Heat resistant
- Good dielectric strength
- Length: 1 Inch Cut Piece
Applications
- Motors
- Generators
- Transformers
- Hermetically Sealed Motors