text.skipToContent text.skipToNavigation

Von Roll DMD-100 Square Form Wedge, 20 Mil x 1/4" x 0.1719", 4" Cut Piece Length

ID: WGEDMD201611X4.00 Mfr ID: WGEDMD201611X4.00
Manufactured by: Von Roll Insulation
DMD 100 is a Class "F" 3 layer insulation composite used as a coil separator, slot liner, wedge and phase insulation for both manual and automatic insertion. It also serves as a primary layer and outer wrap insulation for transformers and for hermetically sealed motors.

USD $40.22 / 1000 PC

Buy more and save

14800-24999 $40.22 / 1000 PC
25000+ $33.83 / 1000 PC

Check availability 

This item may be sold in units of 14,800.

  • Brand name :  Von Roll
  • Trade Name :  Dacron® Mylar® Dacron®-100
  • Series :  Dacron® Mylar® Dacron®-100-SQ-36-CUT
  • Item Name :  Square Form Wedge
  • Short Desc :  WEDGE DMD 3-14-3
  • UNSPSC :  30141508

DMD 100 is a Class "F" 3 layer insulation composite used as a coil separator, slot liner, wedge and phase insulation for both manual and automatic insertion.

Design & Construction
Insulation Type Class F 
Material Polyester 
General Features
Type Triplex 
Environmental Condition
Temperature Rating 155  deg C
Physical Properties
Width 0.25  Inch
Height 0.1719  Inch
Thickness 20  Mil
Length 4  Inch

Features :

  • Tough
  • Heat resistant
  • Good dielectric strength
  • Length: 4 Inch Cut Piece

Applications :

  • Motors
  • Generators
  • Transformers
  • Hermetically Sealed Motors