text.skipToContent text.skipToNavigation

Solder Wire

  • 1(current)
  • 2
  • 3
Displaying 1 - 21 of 53 products found
  • Kester AC Inorganic Acid Sn50 Pb50 Soldering Wire

    Multiple item options available
    Mfr ID: 5050-AC
    The Kester acid core is a highly active inorganic acid type of flux developed for general purpose soldering applications where a flux-cored solder wire is desirable. Rapid soldering can be accomplished on all common metals except aluminum and manganese. Acid flux is particularly useful for soldering excessively oxidized metals. Acid core is classified as INH1 per J-STD-004.

     

  • Kester 44 Rosin Activated Sn05 Pb93.5 Ag1.5 Soldering Wire, 58 Core (2.2%), 0.031" Dia, 1 lb Spool

    ID: SN05AG1.54458.031
    Mfr ID: 2473400060
    The Kester 44 rosin flux is an activated rosin formula for use in flux-cored solder wire. 44 has virtually dominated the field of activated rosin core solders for well over four decades. 44 is classified as ROM1 per J-STD-004.

     

  • ID:
    Mfr ID: MM01054
    Loctite C 400 cored solder wire has been specially formulated to complement no-clean wave and reflow soldering processes. Multicore C400 wires provide fast soldering on copper, brass and solder coated materials.

     

  • Kester 285 Rosin Mildly Activated Sn10 Pb88 Ag02 Soldering Wire

    Multiple item options available
    Mfr ID: 1088-285
    The Kester 285 mildly activated rosin flux is classified as type ROL0 flux under IPC J-STD-004. This flux was formerly classified as type RMA per QQ-S-571. 285 consists of high quality, purified rosin to which a synergistic combination of activating agents has been incorporated. The fluxing ability of 285 is much greater than ordinary mildly activated rosin fluxes and is comparable to fully activated rosin fluxes.

    In Stock

  • Kester 44 Rosin Activated Sn40 Pb60 Soldering Wire

    Multiple item options available
    Mfr ID: 4060-44
    The Kester 44 rosin flux is an activated rosin formula for use in flux-cored solder wire. 44 has virtually dominated the field of activated rosin core solders for well over four decades. 44 is classified as ROM1 per J-STD-004.

    In Stock

  • Kester Sn50 Pb50 Soldering Wire

    Multiple item options available
    Mfr ID: 5050
    Complete analysis of Kester Solder Wire prove that every batch conforms to the strictest quality control standards in the solder industry. Kester leaded and lead-free solid core solder wire meets IPC J-STD-006C. Kester solder wire purchased directly or through Kester stocking distributors will conform to these requirements.

    In Stock

  • Kester 44 Rosin Activated Sn50 Pb50 Soldering Wire

    Multiple item options available
    Mfr ID: 5050-44
    The Kester 44 rosin flux is an activated rosin formula for use in flux-cored solder wire. 44 has virtually dominated the field of activated rosin core solders for well over four decades. 44 is classified as ROM1 per J-STD-004.

    In Stock

  • Kester 285 Rosin Mildly Activated Sn05 Pb93.5 Ag1.5 Soldering Wire

    Multiple item options available
    Mfr ID: 5935-285
    The Kester 285 mildly activated rosin flux is classified as type ROL0 flux under IPC J-STD-004. This flux was formerly classified as type RMA per QQ-S-571. 285 consists of high quality, purified rosin to which a synergistic combination of activating agents has been incorporated. The fluxing ability of 285 is much greater than ordinary mildly activated rosin fluxes and is comparable to fully activated rosin fluxes.

     

  • Kester Sn60 Pb40 Soldering Wire

    Multiple item options available
    Mfr ID: 6040
    Complete analysis of Kester Solder Wire prove that every batch conforms to the strictest quality control standards in the solder industry. Kester leaded and lead-free solid core solder wire meets IPC J-STD-006C. Kester solder wire purchased directly or through Kester stocking distributors will conform to these requirements.

    In Stock

  • Kester 285 Rosin Mildly Activated Sn60 Pb40 Soldering Wire

    Multiple item options available
    Mfr ID: 6040-285
    The Kester 285 mildly activated rosin flux is classified as type ROL0 flux under IPC J-STD-004. This flux was formerly classified as type RMA per QQ-S-571. 285 consists of high quality, purified rosin to which a synergistic combination of activating agents has been incorporated. The fluxing ability of 285 is much greater than ordinary mildly activated rosin fluxes and is comparable to fully activated rosin fluxes.

    In Stock

  • Kester 285 Rosin Mildly Activated Sn62 Pb36 Ag02 Soldering Wire

    Multiple item options available
    Mfr ID: 6236-285
    The Kester 285 mildly activated rosin flux is classified as type ROL0 flux under IPC J-STD-004. This flux was formerly classified as type RMA per QQ-S-571. 285 consists of high quality, purified rosin to which a synergistic combination of activating agents has been incorporated. The fluxing ability of 285 is much greater than ordinary mildly activated rosin fluxes and is comparable to fully activated rosin fluxes.

    In Stock

  • Kester Sn63 Pb37 Soldering Wire

    Multiple item options available
    Mfr ID: 6337
    Complete analysis of Kester Solder Wire prove that every batch conforms to the strictest quality control standards in the solder industry. Kester leaded and lead-free solid core solder wire meets IPC J-STD-006C. Kester solder wire purchased directly or through Kester stocking distributors will conform to these requirements.

    In Stock

  • Kester Sn95 Ag5 Soldering Wire

    Multiple item options available
    Mfr ID: 95AG5
    Complete analysis of Kester Solder Wire prove that every batch conforms to the strictest quality control standards in the solder industry. Kester leaded and lead-free solid core solder wire meets IPC J-STD-006C. Kester solder wire purchased directly or through Kester stocking distributors will conform to these requirements.

     

  • Kester Sn96.3 Ag3.7 Soldering Wire

    Multiple item options available
    Mfr ID: 96337
    Complete analysis of Kester Solder Wire prove that every batch conforms to the strictest quality control standards in the solder industry. Kester leaded and lead-free solid core solder wire meets IPC J-STD-006C. Kester solder wire purchased directly or through Kester stocking distributors will conform to these requirements.

    In Stock

  • Kester 285 Rosin Mildly Activated Sn95 Sb05 Soldering Wire

    Multiple item options available
    Mfr ID: 95SB05-285
    The Kester 285 mildly activated rosin flux is classified as type ROL0 flux under IPC J-STD-004. This flux was formerly classified as type RMA per QQ-S-571. 285 consists of high quality, purified rosin to which a synergistic combination of activating agents has been incorporated. The fluxing ability of 285 is much greater than ordinary mildly activated rosin fluxes and is comparable to fully activated rosin fluxes.

    In Stock

  • Kester 275 No-Clean Sn96.5 Ag3.5 Soldering Wire, 58 Core (2.2%), 0.031" Dia, 1 lb Spool

    ID: SN965AG3527558.031
    Mfr ID: 2470407601
    The Kester 275 no-clean flux for cored solder wire was developed to provide superior wetting performance for hand soldering in the electronics industry. The chemistry is based on some of the same principles that have been safely used for years in mildly activated rosin fluxes.

     

  • Kester 44 Rosin Activated Sn96.5 Ag3.7 Soldering Wire

    Multiple item options available
    Mfr ID: 96537-44
    The Kester 44 rosin flux is an activated rosin formula for use in flux-cored solder wire. 44 has virtually dominated the field of activated rosin core solders for well over four decades. 44 is classified as ROM1 per J-STD-004.

    In Stock

  • Kester Sn99.3 Cu0.7 (K100LD) Soldering Wire, 0.125" Dia, 5 lb Spool

    ID: SN99.3SW.1255LB
    Mfr ID: 1695740125
    Complete analysis of Kester Solder Wire prove that every batch conforms to the strictest quality control standards in the solder industry. Kester leaded and lead-free solid core solder wire meets IPC J-STD-006C. Kester solder wire purchased directly or through Kester stocking distributors will conform to these requirements.

     

  • Zephyrtronics LOWMELT® Sn Pb Desolder Wire, 32 ft

    ID: LMS-0975
    Mfr ID: LMS-0975
    Low Temperature SMD and through hole removal and BGA pad re-dressing solder. Remove your SMD's at temperature under 150 deg C: Our world-famous LowMelt removes SMD's and through hole components at temperatures 300 to 400 deg C lower than other de-soldering methods. All below 150 deg C and LowMelt is available in both RoHS compliant (lead-free) and in classic leaded alloys. No Nozzles! And LowMelt Desolder Wire will remove SMD's and Thru-Hole components without any need for scorching, clumsy and expensive custom nozzles for every SMD chip.

     

  • Kester Sn96.5 Ag3.0 Cu0.5 (SAC305) Soldering Wire

    Multiple item options available
    Mfr ID: SAC305
    Complete analysis of Kester Solder Wire prove that every batch conforms to the strictest quality control standards in the solder industry. Kester leaded and lead-free solid core solder wire meets IPC J-STD-006C. Kester solder wire purchased directly or through Kester stocking distributors will conform to these requirements.

    In Stock

  • Kester 331 Water Soluble Sn96.5 Ag3.0 Cu0.5 (SAC305) Soldering Wire

    Multiple item options available
    Mfr ID: SAC305-331
    The Kester 331 organic flux is a water soluble formula for use in flux-cored solder wire. This cored solder version of the popular 2331-ZX neutral organic water soluble liquid flux is more effective than rosin fluxes in soldering difficult metals. The same fast action and mild properties are exhibited with 331 organic flux as with the liquid 2331-ZX.

    In Stock

    • 1(current)
    • 2
    • 3