text.skipToContent text.skipToNavigation

SKF Bearings

SKF has been developing bearings solutions for customers since 1907. Bearings for electric motors include single row radial, single row cylindrical, single row angular, single row deep groove, and double row angular. SKF specialty solutions include Insocoat® electrically insulated bearings, to protect against damages caused by electrical currents, hybrid ceramic ball bearings, and bearing repair and maintenance.

Shop All SKF Bearings Products
  • 1(current)
  • 2
  • 3
Displaying 1 - 21 of 61 products found
  • SKF 6200/VL024104 Single Row Deep Groove Radial Ball Bearing, Insocoat Insulated

    Multiple item options available
    Mfr ID: SKF_6200/VL024104
    SKF 6222/C3VL0241 Insocoat bearings (Insulated Bearings) are designed to prevent current from passing through the bearing. The bearings are a very cost-effective solution compared with other insulation methods. By integrating the insulating properties into the bearing, insocoat bearings can improve reliability and increase machine uptime by virtually eliminating the problem of electrical erosion. An insocoat bearing is a standard bearing that has the external surfaces of its inner or outer ring plasma-sprayed with an aluminum oxide to form a coating. The coating is sealed with a resin to protect against the conductive effects of water and moisture.

    In Stock

  • SKF 6200M Single Row Deep Groove Radial Ball Bearing

    Multiple item options available
    Mfr ID: SKF_6200M
    SKF 6200M single row deep groove ball bearings have deep, uninterrupted raceway grooves. These raceway grooves have a close osculation with the balls, enabling the bearings to accommodate radial loads and axial loads in both directions. Single row deep groove ball bearings are available open or capped (with seals or shields). Open bearings that are also available capped, may have recesses in the outer ring.

    In Stock

  • SKF 6200 Single Row Deep Groove Radial Ball Bearing

    Multiple item options available
    Mfr ID: SKF_6200
    SKF 6200 single row deep groove ball bearings have deep, uninterrupted raceway grooves. These raceway grooves have a close osculation with the balls, enabling the bearings to accommodate radial loads and axial loads in both directions. Single row deep groove ball bearings are available open or capped (with seals or shields). Open bearings that are also available capped, may have recesses in the outer ring.

    In Stock

  • SKF 6307-2RSNR04 Single Row Deep Groove Radial Ball Bearing, 35 mm Bore x 80 mm OD x 21 mm W, Double Seal, Pressed Steel Cage

    ID: 6307-2RSNR04
    Mfr ID: SKF_6300
    SKF 6300NR single row deep groove ball bearings have deep, uninterrupted raceway grooves. These raceway grooves have a close osculation with the balls, enabling the bearings to accommodate radial loads and axial loads in both directions. Single row deep groove ball bearings are available open or capped (with seals or shields). Open bearings that are also available capped, may have recesses in the outer ring.

    In Stock

  • SKF 6300/VL024104 Single Row Deep Groove Radial Ball Bearing, Insocoat Insulated

    Multiple item options available
    Mfr ID: 6322/C3VL207104
    SKF 6300/VL024104 insocoat bearings (Insulated Bearings) are designed to prevent current from passing through the bearing. The bearings are a very cost-effective solution compared with other insulation methods. By integrating the insulating properties into the bearing, insocoat bearings can improve reliability and increase machine uptime by virtually eliminating the problem of electrical erosion. An insocoat bearing is a standard bearing that has the external surfaces of its inner or outer ring plasma-sprayed with an aluminum oxide to form a coating. The coating is sealed with a resin to protect against the conductive effects of water and moisture.

    In Stock

  • SKF 6300 Single Row Deep Groove Radial Ball Bearing

    Multiple item options available
    Mfr ID: SKF_6300
    SKF 6300 single row deep groove ball bearings have deep, uninterrupted raceway grooves. These raceway grooves have a close osculation with the balls, enabling the bearings to accommodate radial loads and axial loads in both directions. Single row deep groove ball bearings are available open or capped (with seals or shields). Open bearings that are also available capped, may have recesses in the outer ring.

    In Stock

  • SKF 6300 M Single Row Deep Groove Radial Ball Bearing

    Multiple item options available
    Mfr ID: SKF_6300M
    SKF 6300 M single row deep groove ball bearings have deep, uninterrupted raceway grooves. These raceway grooves have a close osculation with the balls, enabling the bearings to accommodate radial loads and axial loads in both directions. Single row deep groove ball bearings are available open or capped (with seals or shields). Open bearings that are also available capped, may have recesses in the outer ring.

    In Stock

  • SKF 6313M/C3VL024104 Insocoat Insulated, Single Row Deep Groove Radial Ball Bearing, 65 mm Bore x 140 mm OD x 33 mm W, Machined Brass Cage

    ID: 6313M/C3VL024104
    Mfr ID: SKF_6300M/VL024104
    SKF 6313M/C3VL024104 insocoat bearings are designed to prevent current from passing through the bearing. The bearings are a very cost-effective solution compared with other insulation methods. By integrating the insulating properties into the bearing, insocoat bearings can improve reliability and increase machine uptime by virtually eliminating the problem of electrical erosion. An insocoat bearing is a standard bearing that has the external surfaces of its inner or outer ring plasma-sprayed with an aluminum oxide to form a coating. The coating is sealed with a resin to protect against the conductive effects of water and moisture.

    In Stock

  • SKF 318M Single Row Deep Groove Radial Ball Bearing, 90 mm Bore x 190 mm OD x 43 mm W, Steel Cage

    ID: 318M
    Mfr ID: 300M
    SKF 300M Series single row deep groove ball bearings with filling slots have a filling slot in both the inner and outer rings to accommodate more balls than standard deep groove ball bearings. Filling slot bearings have a higher radial load carrying capacity than bearings without filling slots, but their axial load carrying capacity is limited. They are also unable to operate at the same high speeds as bearings without filling slots. Deep groove ball bearings with filling slots are available open or with shields. They are also available with or without a snap ring groove. Open bearings that are also available with shields, may have recesses in the outer ring. Large size deep groove ball bearings with filling slots, without cage are available on request.

     

  • SKF BB1B24869704 Deep Groove Radial Ball Bearing

    ID: BB1B24869704
    Mfr ID: BB1B24869704
    SKF Special Deep Groove Radial Ball Bearing, Tolerance Class: P6, P5.

     

  • SKF 314SFFC Single Row Deep Groove Radial Ball Bearing, 70 mm Bore x 150 mm OD x 2.5" W, Steel Cage

    ID: 314SFFC06
    Mfr ID: 300SFFC
    SKF 314SFFC single row deep groove ball bearings with filling slots have a filling slot in both the inner and outer rings to accommodate more balls than standard deep groove ball bearings. Filling slot bearings have a higher radial load carrying capacity than bearings without filling slots, but their axial load carrying capacity is limited. They are also unable to operate at the same high speeds as bearings without filling slots. Deep groove ball bearings with filling slots are available open or with shields. They are also available with or without a snap ring groove. Open bearings that are also available with shields, may have recesses in the outer ring. Large size deep groove ball bearings with filling slots, without cage are available on request.

    In Stock

  • SKF 53 A Double Row Angular Contact Ball Bearing

    Multiple item options available
    Mfr ID: SKF_53 A
    SKF 53 A bearings are widely used in industrial drive, agriculture, compressors, motors and generators, construction, industrial fan, industrial transmission and other fields. SKF bearings can ensure high quality for more than 80% raw material of bearings provided by the steel plant, explorer series bearing of bearings are better than any brand bearings currently in bearing performance , lifetime, design, and the use of performance. Explorer series bearings of bearings have more advantages ,such as higher meet rated , lower noise, reducing warranty costs greatly, increasing running time of the machine.

     

  • SKF 6000 Single Row Deep Groove Radial Ball Bearing

    Multiple item options available
    Mfr ID: SKF_6000
    SKF 6000 single row deep groove ball bearings have deep, uninterrupted raceway grooves. These raceway grooves have a close osculation with the balls, enabling the bearings to accommodate radial loads and axial loads in both directions. Single row deep groove ball bearings are available open or capped (with seals or shields). Open bearings that are also available capped, may have recesses in the outer ring.

    In Stock

  • SKF 33 A Double Row Angular Contact Ball Bearing

    Multiple item options available
    Mfr ID: 3305 A-2Z
    SKF 33 A double row angular contact ball bearings correspond in design to two single row angular contact ball bearings arranged back-to-back, but take up less axial space. They can accommodate radial loads as well as axial loads in both directions. They provide stiff bearing arrangements and are able to accommodate tilting moments, the standard assortment of SKF double row angular contact ball bearings comprises bearings in the 32 A, 33 A and 33 D series. Bearings in the 52 and 53 series are no longer available from SKF and have been replaced with 32 and 33 series bearings. With the exception of size 3200, 32 and 33 series bearings are dimensionally interchangeable with bearings in the 52 and 53 series. Size 3200 has a width of 14 mm instead of 14.3 mm.

    In Stock

  • SKF 32 A Double Row Angular Contact Ball Bearing

    Multiple item options available
    Mfr ID: 3206 A-2Z
    SKF 32 A double row angular contact ball bearings correspond in design to two single row angular contact ball bearings arranged back-to-back, but take up less axial space. They can accommodate radial loads as well as axial loads in both directions. They provide stiff bearing arrangements and are able to accommodate tilting moments, the standard assortment of SKF double row angular contact ball bearings comprises bearings in the 32 A, 33 A and 33 D series. Bearings in the 52 and 53 series are no longer available from SKF and have been replaced with 32 and 33 series bearings. With the exception of size 3200, 32 and 33 series bearings are dimensionally interchangeable with bearings in the 52 and 53 series. Size 3200 has a width of 14 mm instead of 14.3 mm.

    In Stock

  • SKF TMES 1 Endoscope, Acrylic Fiber

    ID: TMES1
    Mfr ID: TMES 1
    The SKF TMES 1 is a compact, lightweight endoscope that can be used for effective visual inspection even in the most restricted spaces. Equipped with a built-in variable light source and a flexible 1M (3.3 ft) long fiber optic tube, it is suited to most industrial applications.

     

  • SKF TKED 1 LCD Electrical Discharge Detector Pen

    ID: TKED1
    Mfr ID: TKED 1
    The SKF electrical discharge detector pen (EDD Pen) is a simple to use handheld instrument for detecting electrical discharges in electric motor bearings. Electrical discharges are a result of motor shaft voltages discharging to earth through the bearing, causing electrical erosion, lubricant degradation and ultimately bearing failure. Electric motors are more vulnerable to suffer electrical erosion in bearings when controlled by a variable frequency drive.

     

  • SKF TMES1-C Endoscope Camera Adapter

    ID: TMES1-C
    Mfr ID: TMES1-C
    SKF Endoscope Camera Adapter

     

  • SKF TMRT 1 LCD Multi-Function Laser/Contact Tachometer

    ID: TMRT1
    Mfr ID: TMRT 1
    The SKF TMRT 1 is a user friendly and accurate tachometer utilizing laser or contact for measuring rotational and linear speed. Equipped with a laser and contact adaptor, it offers excellent speed measurement versatility in five different modes. Additionally, the large angular range of +/- 80 deg to target facilitates the easy measurement in areas where straight line access is difficult. The laser optical system allows easy and quick speed measurement at a safe distance from rotating machinery.

     

  • SKF TMST 3 Stethoscope, 30 Hz - 15 kHz

    ID: TMST3
    Mfr ID: TMST 3
    The SKF electronic stethoscope TMST 3 is a high quality, sensitive instrument enabling the determination of troublesome machine parts by the detection of machine noises or vibrations. TMST 3 includes a headset, two different length probes (70 and 220 mm) and a pre recorded audio CD demonstrating the most common encountered troublesome machine noise, all supplied complete in a sturdy carrying case.

     

  • SKF TKSA-20 Shaft Alignment Tool, 670 - 675 nm, 1mW

    ID: TKSA20
    Mfr ID: TKSA-20
    The TKSA 20 is an easy to use laser shaft alignment tool, which requires no special training to operate. Compared to traditional dial indicator methods, the shaft alignment process is greatly simplified, as no additional calculations are required in order to make the necessary adjustments.

     

    • 1(current)
    • 2
    • 3