Loctite® Stycast™ RE-2039 Undiluted Epoxy Resin, 1 gal, Amber
MFR #:LOCRE2039G
EIS #:LOCRE2039G
MFR #:LOCRE2039G
EIS #:LOCRE2039G
Out of Stock
Min Qty:1
|Qty Increment:1
WARNING: California Proposition 65 - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
The undiluted resin exhibits a higher heat distortion, lower moisture absorption, lower shrinkage and lower expansion characteristics than obtainable with a diluted resin. HYSOL® casting compound EE4183 with hardener HD3475 is silica filled for improved thermal properties, lower shrinkage and lower expansion characteristics. They are resistant to gasoline, jet fuel and other solvents. - HYSOL® Resin RE2039 with hardener HD3475 is an undiluted epoxy 100% solids system and should be used where very low mixed viscosity is not a critical requirement.
$227.98 / US gallon
Min Qty:1
|Qty Increment:1
WARNING: California Proposition 65 - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
The undiluted resin exhibits a higher heat distortion, lower moisture absorption, lower shrinkage and lower expansion characteristics than obtainable with a diluted resin. HYSOL® casting compound EE4183 with hardener HD3475 is silica filled for improved thermal properties, lower shrinkage and lower expansion characteristics. They are resistant to gasoline, jet fuel and other solvents. - HYSOL® Resin RE2039 with hardener HD3475 is an undiluted epoxy 100% solids system and should be used where very low mixed viscosity is not a critical requirement.
- Attributes
- Features
- Documents
Attributes
General Information
Item NameUndiluted Epoxy Resin
Trade NameLoctite®
SeriesLoctite® RE-2039
Design & Construction
Base TypeEpoxy
ColorAmber
Cure TypeRoom Temperature
Performance Details
Flexural Strength22000 psi
Moisture Absorption0.2% (24 hr Immersion)
Tensile Strength11650 psi
Chemical Properties
Mixing Ratio100:25 (Parts By Weight), 100:27 (Parts By Volume)
Specific Gravity1.15
Viscosity10000 cP
Electrical Properties
Dielectric Strength1900 V/mil
Physical Properties
Container Size1 gal
Density1.17 g/cc
Elongation5.5%
Hardness85 Shore D
Features
- Shelf life: 12 months at 25 °C (77 °F)
- 37,900 psi compressive strength
- 119 °C glass transition temperature
- 0.42% linear shrinkage
- 25 min at 25 °C (77 °F) (200g mass) pot life
- 200 °C (200g mass) peak exothermic temperature
- 113 °C at 264 PSI heat deflection temperature
- Dielectric Strength: 1900 V/Mil at 10 Mil Thickness
- Viscosity: 10000 cps at 25 °C/77 °F
- Thermal Conductivity: 5 x 10^-4 Cal/sec/cm^2/°C/cm
- Specific Gravity: 1.15 - 1.17