SKF TIH Small Induction Heater, 460 mm W x 200 mm D x 260 mm H, 100 - 120V, 50/60 Hz, Steel And Glass Filled Polyamide
MFR #:85HFR60
EIS #:TIH030M/110V04
Series #:TIH_030
UPC #:07316574954537
MFR #:85HFR60
EIS #:TIH030M/110V04
Series #:TIH_030
UPC #:07316574954537
Out of Stock
Min Qty:1
|Qty Increment:1
WARNING: California Proposition 65 - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
The SKF small induction heater TIH 030m combines high heating capacity with portability. The compact lightweight design makes the TIH 030m portable. Placing the induction coil outside the heater's housing allows the heating of bearings weighing up to 40 kg (88 lb). - SKF TIH Small Induction Heater.
$4,466.31 / Piece
Min Qty:1
|Qty Increment:1
WARNING: California Proposition 65 - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
The SKF small induction heater TIH 030m combines high heating capacity with portability. The compact lightweight design makes the TIH 030m portable. Placing the induction coil outside the heater's housing allows the heating of bearings weighing up to 40 kg (88 lb). - SKF TIH Small Induction Heater.
- Attributes
- Features
Attributes
General Information
Item NameSmall Induction Heater
SeriesTIH_030
Design & Construction
Demagnetization<2 A/cm
MaterialSteel And Glass Filled Polyamide
Performance Details
Heating Capacity40 kg
Operating Area3.9 Inch W x 5.3 Inch H
Time Control60 min
Electrical Properties
Frequency Rating60 Hz
Power Consumption2 kVA
Voltage Rating120 V
Physical Properties
Bore Diameter0.8 Inch
Coil Diameter3.7 Inch
Dimensions460 mm W x 200 mm D x 260 mm H
Standard Yoke Size65 mm
Features
- Compact lightweight design
- 2-step power setting and smaller yokes allow heating smaller bearings safely and at lower power consumption
- Capable of heating a 28 kg (61.7 lb) bearing in just 20 min
- Temperature mode pre-set at 110 °C (230 °F) to help prevent bearing over-heating
- Automatic demagnetization
- Standard yokes 65 mm (2.6 Inch), 40 mm (1.6 Inch), 20 mm (0.8 Inch) included to suit bearing/work piece minimum bore diameter
- Just 20,9 kg (46.0 lb) facilitating portability
- Bore Diameter: 0.8 - 11.8 Inch
- Frequency Rating: 50/60 Hz
- Standard Yoke Size: 65 mm, 40 mm, 20 mm
- Temperature Rating: 20 to 250 °C (68 to 482 °F)
- Time Control: 0 - 60 min
- Voltage Rating: 100 - 120V